jbc SF280 User manual

SF280
Automatic Solder Feed Handle
INSTRUCTION MANUAL

Automatic Solder
Feed Handle
Ref. SF280-A
SF Control Unit
Automatic Solder Feed Handle .......................................... 1 unit Manual............................. 1 unit
Ref. 0028093
Connections
Packing List
The following items are included:
This manual corresponds to the following references:
SF280-A
2

Accesories
Stand for SF280 Solder Feed Handle
Ref. SF-SE
It prevents SF280 Automatic Solder Feed
Handle from rolling away while working.
Guide Kits for SF280
- References with solder wire perforation:
GSF08V-B for wire Ø 0.8 mm / Ø 0.032 in
GSF10V-B for wire Ø 1.0 mm / Ø 0.040 in
GSF12V-B for wire Ø 1.2 mm / Ø 0.047 in
GSF15V-B for wire Ø 1.5 mm / Ø 0.059 in
GSF16V-B for wire Ø 1.6 mm / Ø 0.063 in
- References without solder wire perforation:
GSF04D-B for wire Ø 0.4 mm / Ø 0.016 in
GSF05D-B for wire Ø 0.5 mm / Ø 0.020 in
GSF06D-B for wire Ø 0.6 mm / Ø 0.025 in
GSF08D-B for wire Ø 0.7 - 0.8 mm / Ø 0.028 - 0.032 in
GSF10D-B for wire Ø 0.9 - 1.0 mm / Ø 0.035 - 0.040 in
GSF12D -B for wire Ø 1.1 - 1.2 mm / Ø 0.043 - 0.047 in
GSF15D-B for wire Ø 1.3 - 1.5 mm / Ø 0.051 - 0.059 in
GSF16D-B for wire Ø 1.6 mm / Ø 0.063 in
4
Once the tool is disconnected from the control unit follow these instructions:
- First disassemble the outlet nozzle (1) from the guide tube.
- Than open the guide clamp (2), take off the guide tube (3) and insert the new one.
- Note: The guide tube length can be easily adjusted (4) when the guide clamp (2) is open.
Once the guide tube length is adjusted close the guide clamp (2).
- Finally assemble the outlet nozzle (1) onto the guide tube tip.
Guide
Clamp
Guide
Tube
Outlet
Nozzle
1
Guide
Tube
2
3
Replacing the Guide Tube
3
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm

0028093-1021
Specifications
SF280
Automatic Solder Feed Handle
Ref.: SF280-A
- Solder wire diameter with V-Cut: Ø 0.8 - 1 - 1.5 mm /
Ø 0.03 - 0.04 - 0.06 in
- Solder wire diameter without V-Cut: Ø 0,5 - 0,8 - 1 - 1,5 mm /
Ø 0.02 - 0.03 - 0.04 - 0.06 in
- Total Net Weight: 60 gr / 0.01 lb
- Package Diemensions/Weight: 235 x 40 x 40 mm / 170 g
(L x W x H) 9.25 x 1.57 x 1.57 in / 0.37 lb
Complies with CE standards
ESD safe
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm