Jensen CAR68 Operating instructions

CAR68
6.8” 2 DIN CAPACITIVE TOUCH SCREEN
MULTIMEDIA MECHLESS RECEIVER
AM-FM-RDS
USB Multimedia Player
Front / Rear Camera Inputs
INSTALLATION &
OWNER’S MANUAL
W AT T S Front & Rear
Camera

CAR68
2
INFORMATION
Apple CarPlay is a trademark of Apple Inc. / Use of the Apple CarPlay logo means
that a vehicle user interface meets Apple performance standards. Apple is not
responsible for the operation of this vehicle or its compliance with safety and
regulatory standards.
Please note that the use of this product with iPhone, iPod, or iPad may e󰀨ect
wireless performance.
iPhone, and Apple are trademarks of Apple Inc., registered in the U.S. and other
countries.
Availability of Android Auto™ may vary depending upon your country and phone
model. Please visit android.com/auto for more information.
Android, Android Auto, Google and other marks are trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc.
Other trademarks and trade names are those of their respective owners.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o󰀨 and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di󰀨erent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Copyright and Trademark

3
CAR68 INFORMATION
Video / movie playback will not operate while the vehicle is moving.
This is a safety feature to prevent driver distraction. In-dash video / movie
functions will only operate when vehicle is in Park and the parking brake is
engaged. It is illegal in most jurisdictions for the driver to view video while
the vehicle is in motion.
The SAFETY NOTICE is reminder to drive responsibly and safely while using your
mobile phone device, or any APP’s that are compatible with this unit.
it is highly recommended that your JENSEN CAR68 is installed by a professional
installer or an authorized dealer.
This product is only for use in vehicles with 12VDC negative ground only.
To prevent damage or injury:
• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the
possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the correct rating. Using a fuse with
the wrong rating may cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness rst.
• Use only the provided hardware and wire harness.
• If you experience problems during installation, consult your nearest JENSEN dealer.
• If the unit malfunctions, reset the unit as described. If the problem still persists,
consult your nearest JENSEN dealer or call tech assistance @ 1-888-921-4088.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use
a sti󰀨 cloth, or solvents such as paint thinner and alcohol. They can scratch the
surface of the panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside the
screen will become darker than usual. Normal brightness will return after the unit is
in use for a while.
• When extending the ignition, battery or ground wiring, make sure to use
automotive-grade wiring with an a minimum AWG 16 or more to prevent voltage
drops.
• Do not touch the liquid crystal uid if the LCD is damaged or broken. The liquid
crystal uid may be hazardous to your health or fatal. If the liquid crystal uid from
the LCD contacts your body or clothing, wash it o󰀨 with soap immediately.
Safety Notice

INSTALLATIONCAR68
4
Please read and understand entire manual before
installation.
Consult a qualied technician for detailed instructions or
installation assistance.
Before You Start
• Disconnect negative battery terminal.
• Avoid installing the unit where it would be subject to high
temperatures, such as from direct sunlight, or where it would be
subject to dust, dirt or excessive vibration.
Getting Started
• Unpack unit from its protective packaging.
• Connect vehicle wiring harness and antenna to this receivers
harness. See wiring instructions. Consult a qualied technician if
you are unsure.
• Certain vehicles may require an installation dash kit and/or wiring
harness adapter (sold separately).
• Reconnect battery negative terminal.
• Test for correct operation and secure back into dashboard.
• Snap trim ring into place if needed.
Typical ISO-DIN Installation
Tools Required
Preparation

5
CAR68 INSTALLATION
Tips
EN
Nyne ADS15
USBCHARGE
5V1A
When replacing a fuse, make sure to use the correct type and
amperage. Using an incorrect fuse could cause damage. The unit
uses (1) 15 amp ATO blade-type fuse located on the back of the unit.
Wiring Notes:
Front / Rear camera inputs
Up to two cameras (not included) can be used.
We recommend optional JENSEN Backup Camera Part #
BUCAM200J for FRONT CAMERA and BUCAM300AJ or
BUCAM400AJ for REAR CAMERA
POWER
MAXIMUM OUTPUT 500mA
YELLOW
YELLOW
BLACK
Replace with
ATO Ty pe fuse
Only
Input / Output Wiring Diagram

OPERATIONCAR68
6
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
Select Language Set the Clock
Set Radio Region
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
Set RDS Functions
Auto Store Presets Pair Bluetooth
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
Tips
EN
Nyne ADS15
USBCHARGE
5V1A
The Setup Wizard can be skipped at any time. To rerun the Setup
Wizard again, press RESET with a paperclip for 3 seconds.
Allow connection?
Check number on mobile device
XXXXXX
YES NO
Conrm passcode
FINAL STEP
Tips
EN
Nyne ADS15
USB CHARGE
5V 1A
Getting Started - First Time Setup Wizard
The rst time the unit is powered on, the Setup Wizard will guide you
through the main system settings and connect to your Bluetooth device.
A random Bluetooth
passcode will be
generated. Follow the
on-screen instructions,
and press OK on your
device.

7
OPERATIONCAR68
Press any button to turn the unit on. Press POWER
and hold to turn the unit o󰀨.
Press VOLUME + to increase the volume level.
Press MUTE to silence the audio. Momentarily press
again to return to the previously selected volume.
Pressing VOLUME +/- while muted will also cancel
the mute function.
Press VOLUME + to decrease the volume level.
Press to access the Voice Assistant.
Note: Carplay / Android Auto USB Connection or
compatible iOS / Android Bluetooth connection is
required to use this feature.
Press SOURCE to access available modes: Radio,
USB, Bluetooth Handsfree, Bluetooth Audio, AV In 1,
Front / Rear Camera and Settings.
To reset all settings, use a paper clip to press
RESET for 3 seconds. The unit will reset the main
processor to the default settings.
Power On/Off 1
Volume Up 2
Mute 3
Volume Down 4
Voice Assistant 5
Source Menu 6
System RESET 7
1
2
3
4
5
6
7
Main Control Locations

OPERATIONCAR68
8
Source Menu Operation
Press to quickly access your Top 3 Sources.
Press to access Radio.
Press to access Media Player.
Press to access Apple CarPlay or Android Auto.
Press the clock to put the unit in Standby
mode. Press anywhere on the screen to return
to the previous mode.
Press to display and adjust audio settings.
Press to display the rear camera.
Press to display the front camera.
Press to access les on auxiliary input device.
Press to access the Bluetooth media player.
Press to access les on USB device.
Press to access Bluetooth handsfree calling.
Press to return to the Main Menu.
Press to access the System Setup Menu.
Quick Select Sources 1
Radio 2
Media Player 3
Carplay | Android Auto 4
Standby Mode 5
Audio 6
Rear Camera 7
Front Camera 8
Auxiliary AV Input 9
BT Music 10
USB Media Port 11
BT Handfree Calling 12
Main Menu 13
Settings Menu 14
4
23
1
5
14
13 12 6
11 10 9 8 7

9
OPERATIONCAR68
Gesture Source Ribbon Operation
W AT T S Front & Rear
Camera
While in any Main Source mode (other than Apple CarPlay or Android
Auto), you can quickly swipe to switch sources using the motions
depicted below. The Ribbon Mode Indicator on the screen shows
current location in the layout.
WAT T S Front & Rear
Camera
SWIPE FROM
RIGHT SIDE
SWIPE LEFT
or RIGHT
SWIPE FROM
LEFT SIDE
SWIPE DOWN
FROM TOP
SWIPE UP
FROM BOTTOM
GESTURE SWIPE EXAMPLES
Loc/Dx
Media Pl
W AT T S Front & Rear
Camera
Loc/Dx
Loc/Dx
ndsfree
W AT T S Front & Rear
Camera
Loc/Dx
Rear Camera
W AT T S Front & Rear
Camera
Loc/Dx
CarPlay or
Android Auto
W AT T S Front & Rear
Camera
SOURCE RIBBON LAYOUT
RADIOHANDSFREE MEDIA PLAYER
Loc/Dx
W AT T S Front & Rear
Camera
Swipe gestures cannot be used in Apple CarPlay or
Android Auto modes. Instead, use the HOME button to
return to the Main Menu.
Tips
EN
Nyne ADS15
USBCHARGE
5V1A
Ribbon Mode
Indicator

OPERATIONCAR68
10
AM/FM Tuner Operation
Loc/Dx
Home
Source
Menu
Band Selector 1
Preset Stations 2
Additional Presets 3
EQ Status 4
Settings 5
Audio 6
Seek Tune Up 7
Automatically Store 8
Direct Tuning 9
Preset Scan 10
Seek Tune Down 11
Local | Distance 12
Press to select between FM1, FM2 and FM3.
Press any preset station stored in the current band
to tune radio to saved frequency. To save presets,
tune the radio to desired station, then press and
hold the desired preset button to save the station.
Press to step through and select any of the preset
stations in the additional bands.
Displays the current EQ setting.
Press to access and adjust radio settings.
Press to access and adjust audio settings.
Press to automatically tune to the next strong
station.
Press and hold to automatically nd and store the
strongest stations as presets.
Press to enter the desired station using a keypad.
Press to scan presets and listen to the rst 10
seconds of each. Press again to stop scanning and
listen to the station.
Press to automatically tune to the last strong
station.
Press to toggle between local and distance tuning.
1
Top 3
Sources
1
2Local
Distance
Indicator
Stereo
Mono
Indicator
Station
Info
4
3
5
11 10 9 8 12 67

11
OPERATIONCAR68
10-BAND Equalizer
2 3 4
1
10-Band Sliders 1
Preset EQ 2
Reset 3
Go Back 4
Press to manually adjust frequencies.
Select between the following preset EQ options: Flat, R&B,
Rock, Pop, HipHop, Jazz or Custom (manual adjustment).
Press to reset all EQ frequencies to Flat.
Press to return to the previous source mode.
Each source will remember its respective EQ setting.
Tips
EN
Nyne ADS15
USBCHARGE
5V1A

OPERATIONCAR68
12
Media Player Operation
Source Selector 1
File/Folder List 2
Track Number 3
Elapsed Time 4
Audio 5
Tune/Track Up 6
Play/Pause 7
Shu󰀪e 8
Tune/Track Down 9
Repeat 10
Press desired option to select between audio sources for
the media player: USB, Auxiliary Input or Bluetooth Music.
Press to display all les/folders on the device (Music or
Pictures). Press any le to begin playback. File/folder list is
only available for USB playback.
Displays the current track number/total number of tracks.
Displays the elapsed and total time for the current track.
Press to access and adjust audio settings.
Press to advance to the next track. Press and hold to fast
forward through the current track.
Press to pause or resume playback.
Press to turn the Shu󰀪e feature On or O󰀨. Shu󰀪e feature is
for USB playback only.
Press to return to the previous track. Press and hold to fast
reverse through the current track.
Press to select one of the following repeat options: Repeat
Track, Repeat Folder or Repeat All.
1
Top 3
Sources
8 567
4
10 9
1
2
3
Home
Source
Menu
Media Player - Bluetooth Music Media Player - Auxiliary Input
Media Player
USB Playback

13
OPERATIONCAR68
Media Compatibility
The following types of files are not compatible:
• MP3 PRO format, MP3 playlists
• RMP format
• WAV format
• WMV format
• AAC, protected AAC, M4A format
MP3 playback sequence begins in the root folder of the USB
drive. Any folders that do not include MP3/JPG files are skipped.
ISO9660 standards:
• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and “_” (underscore). Some characters may not
be displayed correctly, depending on the character type.
Some files may not play, depending on sampling rates and bit
rates. For best results, use the following settings when ripping
MP3 files: 128kbps or higher constant bit rate; 44.1kHz or higher
sampling frequency.
Media
Compatibility
Playback Order
Compatible
Recording
Formats
Notes
File Type MP3
File System FAT FAT 12 X
FAT 16/FAT 32 
File
Extension
.mp3/.MP 3/.Mp3/.mP 3 
.rmp/.m4a X
MPEG
Format
MPEG 1 
MPEG 2 
MPEG 2.5 
Sampling
Frequency
MPEG 1 32/44.1/48kHz
MPEG 2 12/16/22.05/24kHz
MPEG 2.5 8/11.025/12kHz
Bitrate
MPEG 1 32 ~ 320kbps
MPEG 2 8 ~ 160kbps
MPEG 2.5 8 ~ 160kbps
Other
Information
Directory Depth Unlimited
File Name Length 32 bytes
Total File Number 2000 files
Total Folder Number 200 folders
File Number via Folder 2000 files
MP3 ID3 TAG
ver.1.x 
ver.2.x 
Title, Artist, Album 
Notes:
• For USB mode, it is not possible to view JPG files on the in-dash monitor while the
vehicle is moving. This is a safety feature to prevent driver distraction.
• The JPG image viewer function will only operate when vehicle is in park and the
parking brake is engaged.

OPERATIONCAR68
14
Bluetooth - Handsfree Operation
1
Preparation
Pairing a New
Device
Connecting a
Paired Device
Bluetooth Phone
Signal Strength 1
Keypad 2
Contacts 3
Recent Calls 4
Before you can use a Bluetooth device, it must be
paired and connected. Make sure that Bluetooth
is activated on your device before you begin the
pairing process.
The unit broadcasts the pairing signal constantly
when no devices are currently connected. Complete
the pairing sequence from your Bluetooth device.
Refer to the owner’s manual for your device for
more details. The device name is “JENSENBT”. The
unit can be in any mode of operation when pairing is
performed. On certain phones, pairing may need to
be done more than once.
Most Bluetooth devices support the auto-connect
feature and will connect automatically if the device
is in range when the unit is powered-on. If your
device was previously paired but does not connect,
enter the Bluetooth setup menu and turn Auto
Connect on.
To access the phone, select Bluetooth Phone from
the Main Menu or from any operational mode.
Displays the strength of the current signal.
Press to display the keypad.
Press to display stored contacts. Press any contact
to dial that number.
Press to display a list of recent calls. Press any
number to dial.
Tips
EN
Nyne ADS15
USBCHARGE
5V1A
1
Top 3
Sources
Home
Source
Menu
2 3 4 5

15
OPERATIONCAR68
Bluetooth - Handsfree Operation
Device Manager 5
Keypad 6
Talk 7
Backspace 8
Phone Number 9
End Call 10
Mute 11
Display Keypad 12
Transfer Audio 13
Press to display a list of paired devices, and
select desired device to connect.
Use the keypad to dial a number.
Press to connect a call to the number entered.
Press to backspace when using the keypad.
Displays the number dialed.
Press to end a call.
Press to mute call audio.
Press to return to the keypad.
Press to transfer call audio between the unit and
the mobile phone.
7
6
9
10 11 12 13
5
8

OPERATIONCAR68
16
Apple CarPlay Operation
Apple CarPlay.
The ultimate copilot.
CarPlay is a smarter, safer way to use your iPhone in the car. CarPlay takes the
things you want to do with your iPhone while driving and puts them right on your
display. You can voice control via Siri directions, make calls, send and receive
messages, and listen to music, all in a way that allows you to stay focused on the
road. Just connect your iPhone and go.
iPhone 11 Pro Max
iPhone 11 Pro
iPhone 11
iPhone XS
iPhone XS Max
iPhone XR
iPhone X
iPhone 8
iPhone 8 Plus
iPhone 7
iPhone 7 Plus
iPhone 6s
For best results:
• Always use an Apple Certied USB-A Lightning cable.
• A car mount for your phone is recommended.
CarPlay is compatible with these iPhone models.
Some features, applications, and services are not available in all areas.
Phone - Use Siri to make calls, return missed calls, listen to voicemail
messages, and view the caller ID on the receiver’s screen.
Messages - Ask Siri to send, read, and reply to text messages. This
hands free operation minimizes distraction and allows you to keep
hands on the wheel and eyes on the road.
Music - Access music by artist, song, play list, and more through the
receiver’s touchscreen or via Siri. The receiver will mirror the iPhone
screen with artist and track information.
Maps - Use Siri to request turn-by-turn directions – search by address
or points of interest. Apple Maps will be mirrored on the screen,
including tra󰀩c information and estimated time to destination.
For more information, visit https://www.apple.com/ios/carplay/.
Note: Certain iPhone functions may be illegal while driving in your location. Be sure
to familiarize yourself with local and state laws regarding mobile devices. When in
doubt, stop and park your vehicle before using any devices.

17
OPERATIONCAR68
Apple CarPlay Operation
OPERATION
Starting CarPlay
Connect an iPhone to the receiver’s USB port using an Apple Certied Lightning
cable (not included). Apple CarPlay will launch automatically, and familiar
applications will appear on the on screen.
Note: For safety reasons, CarPlay features are limited while driving and will
vary with each CarPlay-enabled app. Available functions are determined by each
individual app provider.
Touch - Briey press the desired option.
Swipe - Briey swipe in the desired direction.
Drag - Press, hold and drag to the desired location.
Press any application button on the main CarPlay menu to access that operation
directly. The toolbar on the left side of the screen displays the time, signal strength
and shortcuts to the most popular applications - Phone, Music and Navigation - so
they can be accessed quickly and easily without returning to the main menu.
Note: There is no need to pair Bluetooth to your iPhone when using CarPlay. Phone
calls will occur automatically when connecting an iPhone to the unit’s USB port.
Note: When CarPlay is in use, the unit’s Bluetooth will turn o󰀨 automatically and
hands-free functionality will operate through the CarPlay feature. Any other devices
connected via Bluetooth will be disconnected during CarPlay use.
Exiting CarPlay
Disconnecting your iPhone will automatically exit CarPlay mode. To exit CarPlay
manually while your phone is still connected, press the SOURCE button
momentarily, and the unit’s main source menu will be displayed.
Using CarPlay
The following basic controls will operate many standard CarPlay features.
When the CarPlay menu is displayed, the home button in the lower left corner works
just like the home button on your iPhone.
Press and hold to activate Siri and begin your voice commands. You can also
press the unit’s PTT button while in CarPlay.
At any time during CarPlay operation, you can press HOME button
momentarily to return to the main CarPlay menu screen.

OPERATIONCAR68
18
Android Auto Operation
Android Auto brings the most useful apps to your phone screen or
unit’s display,in a format that makes it easy for you to keep your
main focus on driving. You can control things like navigation and
maps, calls, text messages and music. With larger touch targets, a
simplied interface, and your Google Assistant, it’s designed to minimize distraction
so you can stay focused on the road.
Availability of Android Auto may vary depending upon your country and phone
model. For more information on how to use and download Android Auto, visit https://
www.android.com/auto/faq.
Compatible Devices
What are the requirements to run Android Auto on my phone screen?
An Android phone running Android 5.0 (Lollipop) and up with a data plan is
required to run Android Auto. For best performance, we recommend Android 6.0
(Marshmallow) and up. You can check your phone’s software version by looking at
the About Device section under Settings.
Warning:
Certain uses of the smartphone may not be legal while driving in your jurisdiction,
so you must be aware of and obey any such restrictions. If in doubt as to a particular
function, only perform it while the car is parked. No feature should be used unless it
is safe to do so under the driving conditions you are experiencing.
Google Assistant
With your Google Assistant on Android Auto, you can keep your eyes on the road
and your hands on the wheel while using your voice to help you with your day.
Simply say, “Ok Google,” or in compatible cars, press and hold the voice control
button on your steering wheel.
Navigation
Get real-time tra󰀩c alerts to avoid hazards, speed traps and nd the fastest route. Or
take a break and nd a bite along the way.
Calls & Messages
Your Google Assistant lets you stay connected while you’re driving. Your Assistant
can help you call phone numbers from your contacts, chat with your favorite apps,
read your messages aloud and text back - all while keeping your hands on the wheel.
For best results
• Use an OEM USB cable.
• A car mount for your phone (optional but recommended).

19
OPERATIONCAR68
Exit Android Auto
To exit Android Auto, press the Exit button. Disconnecting your Android phone will
also automatically exit Android Auto mode.
1Android Auto Home Screen
2Maps and Music
3 Notications
4“OK” Google Assistant
Using Android Auto
The Android Auto home screen displays personalized information, like time to your
destination, reminders, recent calls incoming messages, the song you’re listening to
and Google Now cards.
When the Android Auto menu is displayed, you can say “OK Google” or select the
microphone to talk to Google. You can also press the unit’s PTT button while in
Android Auto.
Starting Android Auto
Connect an Android Auto compatible device to the unit via USB cable. Android Auto
will launch automatically, or it can be accessed at any time from the main menu.
Note: When the device for Android Auto is connected to this unit, the device is
also connected via Bluetooth at the same time. If ve devices are already paired, a
message asking if you want to delete the registered device is displayed. If you want
to delete the device, touch [Agree]. If you want to delete other device, touch [BT
Settings] and delete the devices manually.
Note: If Android Auto is turned on during a call on a cellular phone other than an
Android Auto compatible device, the Bluetooth connection will switch to the Android
Auto compatible device after the call.
43
Android Auto Operation
21

OPERATIONCAR68
20
Settings Menu
From the Main Menu, press the gear icon to access the Setup menu and
adjust the following: General, Audio, Display, Radio and Bluetooth.
General:
• Time - Press to set the time.
• Date - Press to set the date.
• Time Zone - Press to select time zone.
• Daylight Savings Time - Press to turn Daylight Savings Time on or off.
• Clock Sync Automatically - Press to select RDS, Phone or Off.
• Language - Press to set the language to English or Spanish.
• Key Beep - Turn the key beep on or off.
• Power Off Delay - Turn the power off delay on or off.
• Factory Reset - Press to reset unit to factory default settings.
Audio:
• Balance/Fader - Adjust balance and fader levels.
• Subwoofer Output - Turn subwoofer output on or off.
• Subwoofer Filter - Select between 50Hz, 80Hz, 120Hz, 160Hz or Off.
• EQ - Press to adjust EQ levels.
• Loudness - Turn Loudness feature on or off.
• Volume - Adjust volume levels for Main Volume, BT Ringer, BT Call,
Navi Mix and Device Mix.
• Source Level - Set desired volume level for each audio source.
• Amp - Turn internal amp on or off.
Display:
• Screen - Turn illumination control on or off, and adjust levels for
Gamma Day, Gamma Night, Day Brightness and Night Brightness.
• LED - Turn animation effect on or off, select desired illumination color,
select day/night colors and adjust day/night brightness levels.
• Wallpaper - Select from available wallpaper options.
Radio:
• Radio Region - Select North America, Europe or Latin America.
• RDS/RBDS - Enable or disable this feature.
• Traffic Announcements - Enable or disable this feature.
• Alternate Frequencies - Enable or disable this feature.
Bluetooth:
• Bluetooth - Turn Bluetooth signal on or off.
• Auto Answer - Turn auto answer feature on or off.
• Auto Connect - Turn auto connect feature on or off.
• Device Name, BT Address & BT Profile - Displays unit information.
Swipe down for
more settings
W AT T S Front & Rear
Camera