Jensen MVB85A - 8.5" LCD Overhead Monitor User manual

®
OPERATION
MANUAL
MVB85A
8.5" OVERHEAD LCD MONITOR
WITH DVD PLAYER
128-7527
POWER
SCREEN
SOURCE STOP
PLAY
EJECT
ON AUTOOFF
S

Important Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used
for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television
reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle
is in “park” or when the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the
parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator
of the motor vehicle.
Warnings
uDo not use any solvents or cleaning materials when cleaning the video monitor.
uDo not use any abrasive cleaners, they may scratch the screen.
uUse only a lightly dampened lint free cloth to wipe the screen if it is dirty.
uLock the LCD screen in the fully closed position when not in use.
uBefore putting on headphones always adjust the volume setting to the lowest position.
uRemember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left
on, can drain the vehicle’s battery.
uDo not put pressure on the screen.
uCaution children to avoid touching or scratching the screen, as it may become dirty or damaged.

3
Congratulations on your purchase of the JENSEN MVB85A
drop-down Video Monitor with DVD Player. The MVB85A
has been designed to give you and your family many years of
video entertainment in the mobile environment. Please read
the directions that follow to familiarize yourself with the
product and to ensure that you obtain the best results from
your equipment.
NOTE:
Installation options vary, see the individual owner’s manuals
for each component in your system to obtain a full under-
standing of each component’s operation.
u8.5” TFT (Thin Film Transistor) Active Matrix
LCD (Liquid Crystal Display) Monitor
uOSD (On Screen Display) for Control of
Picture Quality and Functions
uInfrared Transmitter for Optional IR Wireless
Headphones
uThree Audio/Video Source Inputs (including
the Built-in DVD player)
uDome Lights with Built-in Three Way Switch
uVideo Display ON/OFF Control (when LCD
Panel is Opened and Closed)
uLast Position Memory for DVD
uTwo Headphone Jacks
uScreen Mode Select Switch (16:9, 4:3)
uFull Function Remote Control
uBacklit Controls for Low Light Operation
uBuilt-in Wireless FM Modulator
FEATURES

4
CONTROLS AND INDICATORS DIAGRAM
V O
D
IE
T O
DI U
A
GI D
LIA
A
OMC
PT
C
3
4
2
1
14
15
8
9
10
6
7
11
1
13
12
5
POWER
SCREEN
SOURCE STOP
PLAY
EJECT
ON AUTOOFF
S
1. Dome Lights – Provide additional interior illumination.
2. Infrared Transmitter and Sensor – Used to transmit audio to
wireless headphones. Also allows the remote control to operate
the unit and to control other accessories in the system.
3. Source Button – Source select DVD, AV1, AUX.
4. Screen Mode Button (=) – Allows the user to change screen
format ( Aspect Ratio 4:3 or 16:9 ).
5. Power ON/OFF Button ( ) – Turn the MVB85A ON and OFF.
6. DVD disc insertion slot
7. Three Position Dome Light Switch
• Auto – Automatically switches on the dome lights in
conjunction with the vehicle’s interior illumination.
• Off – The Dome lights will not turn on in this position.
• On – Turns on the Dome lights.
8. Stop Button (<) – This button is used to enter the stop mode.
9. Play Button (u) – This button is used to enter the play mode.
10. Eject Button () – This button is used to eject the disc.
11. Screen Release – Slides in the direction of the arrow to release
the drop down screen.
12. Ventilation Opening
n
MAIN FUNCTION DESCRIPTION

5
MAIN FUNCTION DESCRIPTION
13. LCD Panel – Display the video source and the On Screen
Displays (OSD).
14. Auxiliary Video/Audio Input – Audio and Video Source input.
15. Headphone Jacks – Allows the use of wired headphones with a
1/8” plug for listening to video program audio.
REMOTE CONTROL OPERATION
Battery Installation
Before attempting to operate your Remote Control, install the
batteries as described below.
1) Turn the Remote Control face down. Using a fingernail, lift the
battery cover off.
2) Install two “AAA” batteries. Make sure that proper
polarity (+ or -) is observed.
3) Align the cover tabs with the remote control and press down
until the cover clicks.
The remote control will operate the MVB85A. It is not a universal
remote control and will not control equipment from other
manufacturers.
BATTERY COVER
LIFT HERE

REMOTE CONTROL OPERATION
6
SETUP
REPEAT
DISPLAY
FMM CHANNEL
ON/OFF SELECT
ANGLE
SUBTIT LE
AUDIO
RETURN
A-B
MENU
1
4
7
ENTER
MUTE
9
2
5
8
6
3
POWER EJECT
– VOLUME +
PIXSLOW
PLAY
STOP
II PAUSE
0
ZOOM SOU RCE
1
2
3
4
5
6
19
17
20
18
21
22
23
24
25
7
8
9
10
11
12
13
14
15
16
26
27
28
29
30
MAIN FUNCTION DESCRIPTION
* Function control is available on the unit and the Remote Control.
1. POWER*
Press this button to turn “ON” and “OFF” the MVB85A unit.
2. DISPLAY
Press to display current disc information while the disc is
playing. Press cursor (pqtu) buttons to select from:
Title
Chapter
Angle
Audio
Subtitle
For Title/Chapter, press numeric buttons to enter a
Title/Chapter selection. For Angle, Audio & Subtitle, press the
Enter key repeatedly to change the options. These options
may vary from disc to disc.
3. ANGLE
Press to display and select different camera angles in DVD
mode. Each time you press the button, the angle changes.
Note: The numbers of angles vary from disc to disc. Not all
discs contain this option.
4. SUBTITLE
Press to display and select the subtitle language in DVD mode.
Each time you press the button, the subtitle language changes.
Note: The type and number of languages for subtitle vary from
disc to disc.
DVD
Title
Audio
Subtitle
-/- Chapter Angle 1/1
00:00:14
Ch ENG
Stop
5.1
Off
1/1
1/1

MAIN FUNCTION DESCRIPTION
5. AUDIO
Press to display and select Audio language in DVD mode. Each time you press the button, the language changes.
Note: The available languages vary from disc to disc.
6. ZOOM
Press this button to enlarge the picture when playing a DVD disc.
Press ZOOM button DVD player perform
Once Enlarge the picture 2 times of the original size
Twice Enlarge the picture 3 times of the original size
3 times Enlarge the picture 4 times of the original size
4 times Picture is returned to original size
7. CURSOR (pqtu)
Use these buttons to access menu selections on the screen.
8. MENU
Allow the user to access the disc menu.
9. RETURN
Not used in this model.
10. A-B
Allow user to repeat the playback from point A to point B.
Press A-B button On-Screen Display DVD player
Once Repeat A- Mark the beginning of the section to repeat (Set point A)
Twice Repeat AB Mark the end of the section to repeat (Set point B)
3 times AB Off Cancel the A-B repeat function
7

11. VOLUME DOWN (-)
Press to decrease the volume level of the wired headphone jacks. It is also used to make picture adjustments in the picture select
mode.
12. VOLUME UP (+)
Press to increase the volume level of the wired headphone jacks. It is also used to make picture adjustments in the picture select
mode.
Note: The volume buttons will not affect the volume of wireless headphones or the FM modulator. When using these devices, the
volume must be adjusted with the wireless headphone volume control or with your radio’s volume control.
Description of the adjustment items when the Volume Up and Volume Down buttons are used in the picture select mode:
Item Press Volume Down (-) button Press Volume Up (+) button
CONTRAST Decrease the contrast Increase picture contrast
BRIGHTNESS To darken the picture To brighten the picture
TINT Increase the greenish skin tones Increase the reddish skin tones
COLOR Decrease the color intensity Increase the color intensity
13. SLOW
Play a DVD in slow motion
Press SLOW button DVD Player Perform
Once Play a disc in slow forward motion with the speed reduced to 1/2 of normal speed
Twice Play a disc in slow forward motion with the speed reduced to 1/4 of normal speed
3 times Play a disc in slow forward motion with the speed reduced to 1/6 of normal speed
4 times Play a disc in slow forward motion with the speed reduced to 1/7 of normal speed
5 times Play a disc in slow reverse motion with the speed reduced to 1/2 of normal speed
6 times Play a disc in slow reverse motion with the speed reduced to 1/4 of normal speed
7 times Play a disc in slow reverse motion with the speed reduced to 1/6 of normal speed
8 times Play a disc in slow reverse motion with the speed reduced to 1/7 of normal speed
9 times Return to normal speed
8

14. PIX ( Picture Select )
Each time this button is pressed, the on screen picture adjustment displays the “adjustment bar” for BRIGHTNESS, CONTRAST, COLOR
or TINT. Once the desired adjustment bar is displayed, use the VOLUME+/ VOLUME– button to adjust the setting. The display will
automatically turn off if no adjustments are made within 6 seconds, or is any other button is pressed.
15. PAUSE (II)
Press to pause playback.
16. STOP (<)*
Press to stop playback.
17. FMM ON/OFF Button
Turns the FM Modulator power on/off.
18. CHANNEL SELECT Button
Selects the FM modulator Frequency (Frequency 1, 88.3MHz, Frequency 2, 88.7MHz, Frequency 3, 89.1MHz, Frequency 4, 89.5MHz,
Frequency 5, 89.9MHz)
19. Eject () Button*
This button is used to eject the disc.
20. NUMBERS
Allow the user to enter the numbers 0-9 for selection of the tracks, titles, chapters or password setting.
21. SOURCE*
Video signals from video equipment connected to the audio / video input can be displayed on the monitor by pressing this button. Each
time the button is pressed, the audio/video source will switch between DVD, AV1 and AUX.
22. MUTE
Press to mute the audio. Press it again to restore the sound to the previously set level.
9

23. ENTER
Press to implement selected settings.
24. SETUP
Press to display the Setup Menu which allows the user to change the DVD player options such as TV DISPLAY, OSD LANGUAGE, EQ
TYPE, PARENTAL CONTROL etc. Refer to the settings and adjustments section for more information.
25. REPEAT
Allow the user to repeat the playback in various options. Press repeatedly to change the options.
24. NEXT (:)
Press to skip to the next chapter or track.
25. PREVIOUS (9)
Press to return to the previous chapter or track.
26. SCAN FORWARD (8)
Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times the normal speed.
27. SCAN BACKWARD (7)
Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times the normal speed.
28. PLAY*
Press to activate the play mode while a disc is loaded in the disc compartment.
10
* Function control is available on the unit and the Remote Control.