Jetson BOLT User manual

BOLT
ELECTRIC FOLDING SCOOTER

TABLE OF CONTENTS
What’s in the Box 1
Features & Specs 2
Attaching the Seat 3
Attaching the Foot Rests 4
Attaching the Fenders 5
Charging the Battery 6
Unfolding the Bolt 7
Operating the Bolt 8
Riding the Bolt 9
Using the Thumb Throttle 10
Using the Brake 11
Using the Kickstand 12
Connecting the Bluetooth® 13
Folding the Bolt 14
Care and Maintenance 15
Safety Warnings 16

1. WHAT’S IN THE BOX 1. FRONT TIRE
2. HEADLIGHT
3. STEM QUICK RELEASE
4. HANDLEBAR
5. CARRYING HANDLE
6. SEAT
7. SEAT CLAMP
8. TAILLIGHT
9. REAR FENDER
10. REAR TIRE
11. KICKSTAND
12. FOOT REST
13. FRONT FENDER
14. FRONT TIRE
15. CHARGER
16. CHARGING CABLE
15
16
1
2
4
5
6
7
8
9
3
10
11
12
13
14

2. FEATURES & SPECS
• Product Dimensions: 40” x 20” x 37”
• Weight Limit: 250 lbs.
• Product Weight: 34 lbs.
• Recommended Age: 13+
• Tire Size: 12”
• Max Speed: Up To 16 mph/ 26 km/h
• Max Range: Up To 17 Miles/ 27 km
• Battery: 36V, 6.0Ah Lithium-Ion
• Motor: 250W Hub Motor
• Charger: 110-240V
• Charge Time: Up To 5 Hours
• Climbing Angle: Up To 15°
BOLT

3. ATTACHING THE SEAT
Open
Stem
Clamp
Slide Seat
into Stem
Tube
Turn the Knob
clockwise to
tighten Stem
Clamp
Close
the Stem
Clamp

Place each Foot Rest onto the tubes and turn it towards
the rear tire until it is secure.
4. ATTACHING THE FOOT RESTS

5. ATTACHING THE FENDERS
Remove Bolt and Nut from the frame. Run the Bolt through the
Fender and frame, and secure using the Nut.
Front Fender
Bolt
Nut
Rear Fender Bolt
Nut

6. CHARGING THE BATTERY
A few must-do’s:
• Only use the included charger
• Plug the charger into the wall before the Charging Port
• Don’t turn on the Bolt while it’s charging (it needs its rest)
• Charge the battery until it is fully charged - up to 5 hours
• Replace the cover over the Charging Port when done
• Remember to have fun!
CHARGING INDICATOR ON THE CHARGER:
Red Light: Battery is charging
Green Light: Charging is complete
Charging
Port

7. UNFOLDING THE BOLT
7.1
7. 2
Slowly lift the
Handlebars up
Press the Stem
Quick Release
in to lock

8. OPERATING THE BOLT
• Powering On/Off - To turn the Bolt on, flip the power switch to ON. To turn
it off, flip the power switch to OFF.
• Light Function - Once the Bolt is on, hold the Horn for 3 seconds to turn
on the Headlight and Taillight. Hold the Horn for 3 seconds again to turn off
the lights.
• Cruise Control - Press the Cruise Control Button when you have reached
the speed you would like to maintain. Apply the brake to turn off Cruise
Control.
Horn
Power Switch
Cruise Control