Jetter JetVewMobile 206 User manual

User Manual
JetVewMobile 206
HMI
We automate your success.
60886309_01

Jetter AG
Graeterstrasse 2
71642 Ludwigsburg Germany
Germany
Phone
Switchboard [phone]
Sales [phone]
Technical hotline [phone]
E-mail
Technical hotline [email protected]
Sales [email protected]
www.jetter.de
Translation of the german original User Manual
Revision 2.00
Date of issue 2/17/2023
This document has been compiled by Jetter AG with due diligence based on the state of the art as
known to them. Any revisions and technical advancements of our products are not automatically
made available in a revised document. Jetter AG shall not be liable for any errors either in form or
content, or for any missing updates, as well as for any damage or detriment resulting from such
failure.

Jetter AG Table of contents
User Manual – JetVewMobile 206 iii
Table of contents
1 Introduction......................................................................................................................................... 5
1.1 Information on this document ...................................................................................................... 5
1.2 Typographical conventions.......................................................................................................... 5
1.3 Legal notices ............................................................................................................................... 6
2 Safety ................................................................................................................................................... 7
2.1 General Information..................................................................................................................... 7
2.2 Purpose ....................................................................................................................................... 7
2.2.1 Intended use.................................................................................................................... 7
2.2.2 Usage other than intended .............................................................................................. 7
2.3 Warnings used in this document ................................................................................................. 8
3 Product Description ........................................................................................................................... 9
3.1 Design ......................................................................................................................................... 9
3.2 Product Features ....................................................................................................................... 10
3.3 Nameplate ................................................................................................................................. 11
3.4 Scope of delivery ....................................................................................................................... 11
4 Technical specifications .................................................................................................................. 12
4.1 Dimensions................................................................................................................................ 12
4.2 Display....................................................................................................................................... 12
4.3 Pushbuttons............................................................................................................................... 12
4.4 Processor Kernel ....................................................................................................................... 13
4.5 Mechanical specifications.......................................................................................................... 13
4.6 Environmental conditions .......................................................................................................... 13
4.7 Electrical properties ................................................................................................................... 13
4.8 EMC values ............................................................................................................................... 14
4.9 Ports and interfaces................................................................................................................... 15
4.9.1 ISOBUS interface .......................................................................................................... 15
4.9.2 USB interface ................................................................................................................ 15
4.10 Inputs/outputs according to ISO11786:1995 ............................................................................. 15
4.11 Acoustic signal generator .......................................................................................................... 16
4.12 Real-time clock .......................................................................................................................... 17
5 Mechanical installation .................................................................................................................... 18
5.1 Allowed mounting orientations................................................................................................... 19
6 Electrical connection........................................................................................................................ 20
6.1 8-pin M12 connector (male)....................................................................................................... 21
6.2 8-pin M12 connector (female).................................................................................................... 21

Jetter AG Table of contents
User Manual – JetVewMobile 206 iv
7 Firmware and system menu ............................................................................................................ 22
7.1 Creating an EDC file.................................................................................................................. 22
7.2 Description of the IOP file of the system menu ......................................................................... 23
7.3 Updating the firmware and system menu via USB .................................................................... 24
7.4 Updating the firmware and system menu via CAN bus ............................................................. 25
8 Programming .................................................................................................................................... 26
8.1 Properties of the system menu.................................................................................................. 26
8.1.1 Reserved Object IDs ..................................................................................................... 27
8.1.2 Physical keys................................................................................................................. 31
8.1.3 Key Codes ..................................................................................................................... 31
8.2 Character set types of the system menu ................................................................................... 32
8.3 Language selection in the system menu ................................................................................... 33
8.4 Programming examples............................................................................................................. 34
8.4.1 Programming example for numeric editor ..................................................................... 34
8.4.2 Programming example for list editor.............................................................................. 34
8.4.3 Programming example for string editor ......................................................................... 35
8.4.4 Programming example for multiple keyboards .............................................................. 35
8.4.5 Programming example for error messages ................................................................... 36
8.5 Defining the date format ............................................................................................................ 37
9 Maintenance ...................................................................................................................................... 38
9.1 Repairs ...................................................................................................................................... 38
9.2 Return and disposal................................................................................................................... 38
9.3 Storage and shipment ............................................................................................................... 39
10 Service ............................................................................................................................................... 40
10.1 Customer service....................................................................................................................... 40
11 Spare parts and accessories ........................................................................................................... 41
11.1 Accessories ............................................................................................................................... 41

Jetter AG Introduction | 1
User Manual – JetVewMobile 206 5 / 44
1 Introduction
1.1 Information on this document
This document forms an integral part of the product and must be read and under-
stood prior to using it. It contains important and safety-related information for the
proper use of the product as intended.
Purpose of the Doc-
ument
This document describes rules for the design of the system menu in ISOBUS op-
erating devices of Jetter AG.
It does not describe all the functions and operation of the virtual ISOBUS termi-
nal.
Target groups This document is intended for specialists with appropriate qualifications.
Only competent and trained personnel is allowed to put this device into operation.
During the whole product life cycle, safe handling and operation of the device
must be ensured. In the case of missing or inadequate technical knowledge or
knowledge of this document any liability is excluded.
Availability of infor-
mation
Make sure this document is kept at the ready in the vicinity of the product
throughout its service life.
For information on new revisions of this document, visit the download area on our
website. This document is not subject to any updating service.
Start | Jetter - We automate your success.
For further information refer to the following information products:
■Application-oriented manuals
Cross-product documentation
■Version updates
Information about changes to the software products and operating system of
your device
1.2 Typographical conventions
This manual uses different typographical effects to support you in finding and
classifying information. Below, there is an example of a step-by-step instruction:
üThis symbol indicates requirements which have to be met before executing
the following action.
►This sign or a numbering at the beginning of a paragraph marks an action in-
struction that must be executed by the user. Execute the instructions one after
the other.
ðThe target after a list of instructions indicates reactions to, or results of these
actions.
INFO Further information and practical tips
In the info box you will find helpful information and practical tips about your prod-
uct.

Jetter AG Introduction | 1
User Manual – JetVewMobile 206 6 / 44
1.3 Legal notices
The firmware and tools used by the device use software products or components
of the third-party providers named below.
Licenses of third-
party providers
Prod-
uct Licensor Link to the license document License type
FSF lib Free Software
Foundation
https://www.fsf.org/licensing GPLv3
CMSYS ARM Limited ARM contract reference LEC-
PRE-00489n-V3.0
Open Source
ST lib ST Microelec-
tronics
http://www.st.com/software_li-
cense_agreement_liberty_v2
Free for con-
trollers belong-
ing to ST
Python Python Soft-
ware Founda-
tion (PSF)
https://docs.python.org/3/license.html GPL-compati-
ble
srec_ca
t
Peter Miller http://srecord.sourceforge.net GNU GPLv3
Tab.1: Licenses of third-party providers

Jetter AG Safety | 2
User Manual – JetVewMobile 206 7 / 44
2 Safety
2.1 General Information
When placed on the market, this product corresponds to the current state of sci-
ence and technology.
In addition to the operating instructions, the laws, regulations and guidelines of
the country of operation or the EU apply to the operation of the product. The op-
erator is responsible for compliance with the relevant accident prevention regula-
tions and generally accepted safety rules.
E1 type approval The device has an E1 approval according to ECE R10 Rev. 5.
RoHS 2 The device conforms to the EU directive 2011/65/EU (RoHS 2).
2.2 Purpose
2.2.1 Intended use
The JVM-206 device is intended for operation of ISOBUS applications for mobile
work machines.
Operate the device only in accordance with the intended conditions of use, and
within the limits set forth in the technical specifications.
Intended use of the product includes its operation in accordance with this man-
ual.
2.2.2 Usage other than intended
This device must not be used in technical systems which to a high degree have
to be fail-safe.
Machinery Directive This device is no safety-related part as per Machinery Directive 2006/42/EC, and
must, therefore, not be used for safety-relevant applications. This device is NOT
intended for the purpose of personal safety, and must, therefore, not be used to
protect persons.

Jetter AG Safety | 2
User Manual – JetVewMobile 206 8 / 44
2.3 Warnings used in this document
DANGER
High risk
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Medium risk
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Low risk
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
Material damage
Indicates a situation which, if not avoided, could result in mal-
functions or material damage.

Jetter AG Product Description | 3
User Manual – JetVewMobile 206 9 / 44
3 Product Description
The JVM-206 control unit is an ISOBUS Virtual Terminal that features intuitive
operation. Due to the ISOBUS-UT functionality, it works together with ISOBUS
controllers. Communication is via the ISOBUS protocol.
Supported firmware This document refers to firmware version 2.0.0.84 and higher.
3.1 Design
Front
9
1 2 34567
8
Fig.1: Front side of the control unit
1On/Off key
2ISB key
3Settings key
4Home key
5ESC key
6Navigation keys
7OK key
8Function keys
9TFT-Touchscreen

Jetter AG Product Description | 3
User Manual – JetVewMobile 206 10 / 44
Rear
5
1
2
3
6
11
4
Fig.2: Rear of the control unit
1Female thread for RAM mount holder
2M12 plug, 8-pin
3M12 socket, 8-pin
4Nameplate
5Loudspeaker
6Housing screw connection
3.2 Product Features
■Display: 5" touchscreen, high-resolution
■Input: 13 freely programmable function keys (softkeys F1…F12, ISB);
7 permanently assigned hard keys (On/Off, Settings, Home, ESC, Navigation,
OK)
■2 digital inputs for the tractor speed signal
■1 digital input for the speed of the rear PTO shaft
■1 three-point digital input
■1 three-point analog input
■1 digital input for the ignition signal
■Real-time clock (RTC) with battery backup
■ISOBUS-UT function
■16-MB flash memory
■TECU function
■Calibrating function for the tractor speed signal
■FS function
■Update of the operating system and system menu via USB
■Adaptable system menu

Jetter AG Product Description | 3
User Manual – JetVewMobile 206 11 / 44
3.3 Nameplate
12
3
4
567
8
9
Fig.3: Nameplate
1Manufacturer logo
2Barcode
3Serial number
4CE mark
5E1 approval
6E1 approval number
7Hardware revision
8Part number
9Product type
3.4 Scope of delivery
Scope of delivery Item number Quantity
JVM-206 10001905 1

Jetter AG Technical specifications | 4
User Manual – JetVewMobile 206 12 / 44
4 Technical specifications
This chapter contains information on electrical and mechanical data as well as
operating data of the JVM-206.
4.1 Dimensions
198
138
R6
37.7
43.2
Fig.4: Dimensions in mm
4.2 Display
Parameter Description
Type TFT screen with touch function
Resolution 800x480pixels
Screen diagonal 5"
Backlighting LED, typ. 500cd/m2 , dimmable
Tab.2: Technical data – display
4.3 Pushbuttons
Parameter Description
Number of membrane
keys
20keys
Backlighting Dimmable
Adjustable between 0%…100%
Typical service life 1,000,000 activations
Tab.3: Technical data – keys

Jetter AG Technical specifications | 4
User Manual – JetVewMobile 206 13 / 44
4.4 Processor Kernel
Parameter Description
CPU STM32F4
FLASH 16MB
SDRAM 8MB
Tab.4: Technical data – computer core
4.5 Mechanical specifications
Parameter Description Standards
Weight 420 g
Enclosure specifications
Material Plastic
Vibration strength 10Hz…150Hz, 6h ISO16750-3
Shock resistance
Type of shock Half-sine wave ISO16750-3
Intensity and duration 50g for 18ms
Number and direction 10shocks in all 3directions of the spatial axes
Tab.5: Technical data – mechanical properties
4.6 Environmental conditions
Parameter Description Standards
Operating temperature -20°C…+70°C ISO16750-4
Climatic conditions Humid heat
Storage temperature -30°C…+70°C ISO16750-4
DINEN60068-2-1
DINEN60068-2-2
Relative humidity 5%…95%
Degree of protection With mating plug: IP65;
Without mating plug: IP20
Tab.6: Technical data – environmental conditions
4.7 Electrical properties
Power supply
T_ECU
Parameter Description
Nominal voltage DC8.5V…18V
Permissible voltage range
VBAT_ECU
DC8V...18V
Maximum current con-
sumption
2A
Typical logic current con-
sumption (VBAT_ECU)
320mA at DC12V
Power consumption Approx 3W
Integrated protective func-
tions
Reverse polarity protection, overvoltage, short volt-
age pulses
Tab.7: Technical data – power supply VBAT_ECU

Jetter AG Technical specifications | 4
User Manual – JetVewMobile 206 14 / 44
4.8 EMC values
The JVM-206 has CE approval in accordance with ENISO14982 for 12-V on-
board systems.
Pulses in accor-
dance with
ISO7637-2
Test pulse Values Function class
1 -450V C
2a +37V A
2b +20V C
3a -150V A
3b +150V A
4 Ua1: -12V/50ms
Ua2: -5V/500ms
B (24-V systems)
Tab.8: Pulses in accordance with ISO7637-2
Pulses in accor-
dance with
ISO16750-2
(12-V on-board sys-
tems)
Test pulse Values Function class
5b Load Dump
70V/2Ω/350ms
C
Tab.9: Pulses in accordance with ISO16750-2 for 12-V on-board systems
Irradiation in accor-
dance with
ISO11452
Irradiation Function class
20MHz...2GHz 30V/m A
20MHz...2GHz 100V/m B
Tab.10: Irradiation in accordance with ISO11452
Emitted radiation
acc. to CISPR25
Emitted radiation Limit values
Narrowband emission
30MHz...1000MHz
30MHz…75MHz=52…42dBµV/m
(logarithmically decreasing)
75MHz…400MHz=42…53dBµV/m
(logarithmically increasing)
400MHz…1000MHz=53dBµV/m (constant)
Wideband emission
30MHz...1000MHz
30MHz…75MHz=62…52dBµV/m
(logarithmically decreasing)
75 MHz…400MHz=52…63dBµV/m
(logarithmically increasing)
400 MHz…1000MHz=63dBµV/m (constant)
Tab.11: Emitted radiation acc. to CISPR 25
ESD acc. to
EN61000-4-2
Electrostatic discharge
(ESD) Function class
Contact ±4kV A
Air ±8kV A
Tab.12: Electrostatic discharge (ESD) acc. to EN61000-4-2

Jetter AG Technical specifications | 4
User Manual – JetVewMobile 206 15 / 44
4.9 Ports and interfaces
4.9.1 ISOBUS interface
Parameter Description
Baud rate 250 kBaud
Protocol ISOBUS
Terminating resistance Integrated
Cable specification CAN-compliant, twisted wire pairs, unshielded
Tab.13: Technical data – ISOBUS interface
4.9.2 USB interface
Parameter Description
Supply unit 5V, max. 500mA
Data rate USB1.1
Protocol USB-Host-Interface
Tab.14: Technical data – USB interface
4.10 Inputs/outputs according to ISO11786:1995
All inputs in the operating voltage range are voltage-proof and overcurrent-proof.
Digital inputs for
tractor speed
Parameter Description
ISO11786: Digital inputs for wheel speed and ground speed with 2 modes.
Abbreviation IN_1…IN_2
Quantity 2
Pull resistance 4.7kΩ
H level Mode1: ≥3.4V
Mode2: ≥6.2V
L level Mode1: ≥2.5V
Mode2: ≥1.5V
Accuracy 2%
System menu functions Mode and pull-up selection
Pulse/meter calibration
Tab.15: Digital inputs for tractor speed acc. to ISO11786:1995
Input for PTO
speed
Parameter Description
ISO11786: PTO speed
Abbreviation PTO_IN
Quantity 1
Pull resistance 4.7kΩ Can be switched off
H level Mode1: ≥3.4V
Mode2: ≥6.2V
Standard = mode1
L level Mode1: ≥2.5V
Mode2: ≥1.5V
Signal Duty cycle 20%…80%
Tab.16: Input for PTO speed acc. to ISO11786:1995

Jetter AG Technical specifications | 4
User Manual – JetVewMobile 206 16 / 44
Digital input for
hitch position
Parameter Description
ISO11786: Hitch position (digital input)
Abbreviation TP_DI_IN
Quantity 1
H level ≥6.2V
L level ≥1.5V
Source resistance 100Ω±10Ω
Input resistance > 3kΩ
Tab.17: Digital input for hitch position acc. to ISO11786:1995
Analog input for
hitch position
Parameter Description
ISO11786: Hitch position (analog input)
Abbreviation TP_AI_IN
Quantity 1
Voltage range 0V…10V
Input resistance >3kΩ
Tab.18: Analog input for hitch position acc. to ISO11786:1995
Input/output for ig-
nition
Parameter Description
Ignition input/output
Abbreviation IGN_KEY
Quantity 1
Input
Power supply 12V
Output
Max. output current 0.5A
Tab.19: Input/output for ignition
4.11 Acoustic signal generator
Category Description
Type Piezo
Volume >70dB With resonance fre-
quency and without me-
chanical damping.
Volume control Turned off,
10%…100%
Controlled via PWM.
Frequency range 200Hz…4kHz
Tab.20: Technical data – acoustic signal generator

Jetter AG Technical specifications | 4
User Manual – JetVewMobile 206 17 / 44
4.12 Real-time clock
Parameter Description
Battery type CR2032
Service life Approx. 10years from
production.
The service life of the
battery depends on the
ambient conditions and
may therefore differ.
Tab.21: Technical data – real-time clock

Jetter AG Mechanical installation | 5
User Manual – JetVewMobile 206 18 / 44
5 Mechanical installation
NOTICE
Damages to material or functional impairment due to
welding
Welding on the chassis may damage the device material, or
impair device functions.
►Before you start welding, disconnect all connections be-
tween the device and the electric system of the vehicle.
►Protect the device from flying sparks and welding beads
(splatter).
►Do not touch the device with the welding electrode or
earth clamp.
NOTICE
Dirt and moisture can affect the electrical connections.
►Protect unused pins using blanking plugs.
►Protect all electrical connections with appropriate single
wire seals.
►Clean the area around a connector prior to removing the
mating connector.
NOTICE
Compliance with degree of protection
The protection class of the device is only ensured if the M12
cable gland is tightened securely.

Jetter AG Mechanical installation | 5
User Manual – JetVewMobile 206 19 / 44
5.1 Allowed mounting orientations
The device has a RAM mount connection and can be installed in the driver's cab
with a suitable holder.
Fig.5: Permitted installation position with RAM mount holder

Jetter AG Electrical connection | 6
User Manual – JetVewMobile 206 20 / 44
6 Electrical connection
WARNING
Signal disruption due to incorrect CAN wiring
Unshielded or incorrectly twisted CAN lines may cause com-
munication faults. In the worst case, a malfunction of the de-
vice can lead to subsequent physical injury.
►Connect 120 Ω termination resistors to both ends of the
CAN bus.
NOTICE
Damages to material or functional impairment
Improper implementation of the wiring harness may cause
mechanical stress.
►Protect the cables from bending, twisting or chafing.
►Install strain reliefs for the connecting cables.
NOTICE
Surges resulting from missing protection or fusing
Surges may cause malfunctions or damage to the product.
►Protect the voltage inputs from surges according to the re-
quirements.
►Ensure that the device is handled in accordance with ESD
regulations.