Jetter JX3-PS1 User manual

User Manual
JX3-PS1
We automate your success.

Jetter AG
Graeterstrasse 2
71642 Ludwigsburg
Germany
Phone
Switchboard [phone]
Sales [phone]
Technical Hotline [phone]
E-mail
Technical Hotline [email protected]
Sales [email protected]
Translation of the original User Manual
Revision 2.00
Date of issue 8/5/2019
This document has been compiled by Jetter AG with due diligence, and based on the known
state of the art. Revisions and further development of our products are not automatically
mentioned in a reviewed document. Jetter AG shall not be liable for errors in form or content,
or for missing updates, as well as for damages or disadvantages resulting from such failure.

Jetter AG Table of contents
JX3-PS1 User Manual iii
Table of contents
1 Introduction .....................................................................................................................................5
1.1 Information on this document .................................................................................................. 5
1.2 Typographical conventions......................................................................................................5
2 Safety ...............................................................................................................................................6
2.1 General information.................................................................................................................6
2.2 Purpose ...................................................................................................................................6
2.2.1 Intended use................................................................................................................6
2.2.2 Usage other than intended ..........................................................................................6
2.3 Warnings used in this document ............................................................................................. 6
3 Product description ........................................................................................................................7
3.1 Design .....................................................................................................................................7
3.2 Functions.................................................................................................................................7
3.3 Position and amount of expansion modules in the system ..................................................... 8
3.4 The status indication ............................................................................................................... 8
3.4.1 Diagnostics capabilities by means of status indication................................................8
3.5 Nameplate ...............................................................................................................................9
3.6 Scope of delivery.....................................................................................................................9
4 Technical specifications...............................................................................................................10
4.1 Dimensions............................................................................................................................10
4.2 Electrical properties...............................................................................................................10
4.3 Environmental conditions ...................................................................................................... 11
4.4 Mechanical specifications......................................................................................................11
4.5 EMC values ........................................................................................................................... 12
4.5.1 Enclosure ..................................................................................................................12
4.5.2 DC power supply inputs and outputs.........................................................................12
5 Mechanical installation.................................................................................................................14
5.1 Installing the expansion module on the DIN rail .................................................................... 14
5.2 Removing the expansion module from the DIN rail............................................................... 15
5.3 Dismounting the enclosure from the backplane module ....................................................... 16
6 Electrical connection ....................................................................................................................17
6.1 Connector specification ......................................................................................................... 17
6.1.1 Power supply terminal X10........................................................................................17
6.2 Functional test .......................................................................................................................17
7 Maintenance and repairs ..............................................................................................................18
7.1 Maintenance, repairs and disposal........................................................................................18
7.2 Storage and shipment ........................................................................................................... 18

Table of contents Jetter AG
iv JX3-PS1 User Manual
8 Service ...........................................................................................................................................19
8.1 Customer service .................................................................................................................. 19
9 Spare parts and accessories .......................................................................................................20
9.1 Spare parts............................................................................................................................20
9.2 Accessories ...........................................................................................................................20

Jetter AG Introduction | 1
JX3-PS1 User Manual 5 / 23
1 Introduction
1.1 Information on this document
This document forms an integral part of the product and must be read and under-
stood prior to using it. It contains important and safety-related information for the
proper use of the product as intended.
Target groups This document is intended for specialists with appropriate qualifications.
Only competent and trained personnel are allowed to commission and operate
this device.
During the whole product life cycle, safe handling and operation of the device
must be ensured. In the case of missing or inadequate technical knowledge or
knowledge of this document any liability is excluded.
Availability of infor-
mation
Make sure this document is kept at the ready in the vicinity of the product
throughout its service life.
For information on new revisions of this document, visit the download area on our
website. This document is not subject to any updating service.
Start | Jetter - We automate your success.
For further information refer to the following information products:
■Version updates
Information about new versions of software products or of the operating sys-
tem of your controller.
■Online help of the JetSym software
Detailed description of software functions with application examples
■Application-oriented manuals
Information on file systems and communication interfaces
1.2 Typographical conventions
This manual uses different typographical effects to support you in finding and
classifying information. Below, there is an example of a step-by-step instruction:
üThis symbol indicates requirements which have to be met before executing
the following action.
►This sign or a numbering at the beginning of a paragraph marks an action in-
struction that must be executed by the user. Execute the instructions one after
the other.
ðThe target after a list of instructions indicates reactions to, or results of these
actions.
More information on this subject is available on our website.
Start | Jetter - We automate your success.
INFO “Info" provides you with useful information and practical tips about the product.

Jetter AG Safety | 2
JX3-PS1 User Manual 6 / 23
2 Safety
2.1 General information
At the time of placing on the market, this product corresponds to the current state
of the art and meets the recognized safety rules.
Besides this user manual, laws and regulations in the operator’s country are rele-
vant to the operation of the product. The operator is responsible for complying
with the directives mentioned below:
■Applicable legislation, rules, and regulations
■Relevant accident prevention regulations
■Accepted safety rules
■EU directives and other country-specific regulations
2.2 Purpose
2.2.1 Intended use
The expansion module provides power supply for JX3 IO modules.
Operate the device only in accordance with the intended conditions of use, and
within the limits set forth in the technical specifications.
Intended use of the product includes its operation in accordance with this man-
ual.
SELV The operating voltage of this device is classified as Safety Extra Low Voltage and
is therefore not subject to the European Low Voltage Directive.
2.2.2 Usage other than intended
This device must not be used in technical systems which to a high degree have
to be fail-safe.
Machinery Directive This device is no safety-related part as per Machinery Directive 2006/42/EC, and
must, therefore, not be used for safety-relevant applications. This device is NOT
intended for the purpose of personal safety, and must, therefore, not be used to
protect persons.
2.3 Warnings used in this document
DANGER High risk
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING Medium risk
Indicates a potential hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION Low risk
Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE Material damage
Indicates a situation which, if not avoided, could result in malfunctions or material
damage.

Jetter AG Product description | 3
JX3-PS1 User Manual 7 / 23
3 Product description
The JX3-PS1 is an expansion module and provides power supply of up to 8 ex-
pansion modules. The module is required if the power supply of the bus node or
controller used is not sufficient to supply all connected expansion modules.
3.1 Design
1
4
3
2
1
5
7
6
Fig.1: Device configuration
1DIN rail latch 2Housing
3Backplane module 4Connector X119 for expansion
modules
5DIN rail release latch 6Power supply terminal X10
7Status indication
3.2 Functions
■Power supply of up to 8 JX3 expansion modules per JX3 station
■The maximum power consumption of connected expansion modules must not
exceed 24 W.

Jetter AG Product description | 3
JX3-PS1 User Manual 8 / 23
3.3 Position and amount of expansion modules in the system
The amount of expansion modules which can be connected to a controller de-
pends on the type of the expansion module. After 8 expansion modules max., a
power supply module must be inserted.
2 3 41
Fig.2: Example: System overview of a controller together with various expansion modules
1Controller 2First expansion module
3Power supply module 4Further expansion modules
INFO You can calculate the exact amount of connectable expansion modules by
means of the JX3-sysbus_configurator_xxx_e which is available for download
from our Homepage.
For more information on this subject refer to the application-oriented manual
"JX3 System" available for download on our website.
3.4 The status indication
The LED of the status indication shows the status of the logic supply.
Fig.3: Status indication
LED Description
R Logic circuit supply
3.4.1 Diagnostics capabilities by means of status indication
Colors and flashing patterns of the LEDs are an excellent source of information to
analyze problems.
LED Flashing pat-
tern Color Description
R OFF --- No logic circuit supply
ON Green Logic voltage supply is OK

Jetter AG Product description | 3
JX3-PS1 User Manual 9 / 23
3.5 Nameplate
53
12
4
Fig.4: Sample nameplate
1Company logo 2Serial number
3CE marking 4Hardware revision
5Type key
3.6 Scope of delivery
Scope of delivery Item number Quantity
JX3-PS1 10000635 1
Male connector in spring-cage technology,
2-pin
60870409 1
Terminal labels 60870411 10
Installation manual 60871940 1

Jetter AG Technical specifications | 4
JX3-PS1 User Manual 10 / 23
4 Technical specifications
4.1 Dimensions
96
64
132
25
31
Fig.5: Dimensions. All dimensions are in millimeters.
4.2 Electrical properties
Power supply input
(terminal X10)
Category Description
Rated voltage DC 24 V
Permissible voltage range -15% ... +20%
Input current 1.0 A max.
Power consumption 24 W max.
Tab.1: Power supply input (terminal X10)
Power supply of
JX3 system bus
Category Description
Logic voltage supply of JX3
system bus
DC +5 V (-15 % … +10 %)
ISV = 1,200 mA max.
P = 6 W max.
Supplementary supply DC +24 V (+15 % … +20 %)
I24V = 1,000 mA max.
P = 24 W max.
Maximum power output Pmax= 24 W
Tab.2: Power supply of JX3 system bus

Jetter AG Technical specifications | 4
JX3-PS1 User Manual 11 / 23
4.3 Environmental conditions
Category Description Standards
Operating temperature 0 °C … +50 °C DIN EN 61131-2
Storage temperature -40 °C … +70 °C DIN EN 60068-2-1
Air humidity 10 … 95 %
non-condensing
DIN EN 60068-2-2
Max. operating altitude: 2,000 m above sea level
Corrosion immunity and
chemical resistance
No special protection against corrosion. Ambient
air must be free from higher concentrations of
acids, alcaline solutions, corrosive agents, salts,
metal vapors, and other corrosive or electrocon-
ductive contaminants.
Degree of pollution - Electronics
Degree of pollution 2 DIN EN 61131-2
Usually, the pollution is non-conductive. However,
temporary conductivity due to condensation may
occur.
Tab.3: Environmental conditions
4.4 Mechanical specifications
Category Description Standards
Enclosure specifications
Material Plastic
Maximum height of fall
Units within packing 1 m DIN EN 61131-2
DIN EN 60068-2-31
Units within product pack-
aging
0.3 m
Vibration resistance
Frequency sweeps 1 octave/minute,
sinusoidal
DIN EN 61131-2
DIN EN 60068-2-6
Constant amplitude 3.5 mm 5 Hz ≤ f ≤ 9 Hz
Constant acceleration 1 g| 9 Hz ≤ f ≤ 150 Hz
Number and direction 10 sweeps for all 3 spatial axes
Shock resistance
Type of shock Half-sine wave DIN EN 61131-2
DIN EN 60068-2-27
Intensity and duration 15 g for 11 ms
Number and direction 3 shocks in the directions of all 3 spatial axes
Degree of protection
Degree of protection IP20 DIN EN 60529
Tab.4: Mechanical specifications

Jetter AG Technical specifications | 4
JX3-PS1 User Manual 12 / 23
4.5 EMC values
4.5.1 Enclosure
Electrical safety Parameter Values Standards
Protection class III DIN EN 61131-2
Dielectric test voltage Functional ground is connected to chassis ground
internally.
Protective connection 0
Overvoltage category II
Tab.5: Electrical safety
Emitted interfer-
ence
Parameter Values Standards
Frequency band 30 … 230 MHz DIN EN 61000-6-3
DIN EN 61131-2
DIN EN 55011
Limit value 30 dB (µV/m) at 10 m
distance
Frequency band 230…1,000 MHz
Limit value 37 dB (µV/m) at 10 m
distance
Class B
Tab.6: Emitted interference
Immunity to inter-
ference
Parameter Values Standards
Magnetic field with mains frequency
Frequency 50 Hz DIN EN 61131-2
DIN EN 61000-6-2
DIN EN 61000-4-8
Magnetic field 30 A/m
RF field, amplitude-modulated
Frequency band 80 MHz ... 2 GHz DIN EN 61131-2
DIN EN 61000-6-2
DIN EN 61000-4-3
Test field strength 10 V/m
AM 80 % with 1 kHz
Criterion A
ESD
Discharge through air
Test peak voltage 6kV
8 kV DIN EN 61131-2
DIN EN 61000-6-2
DIN EN 61000-4-2
Contact discharge
Test peak voltage 6kV
4 kV
Criterion A
Tab.7: Immunity to interference
4.5.2 DC power supply inputs and outputs
Emitted interfer-
ence
Parameter Values Standard
Signal and control interface
DC power supply inputs and
outputs
Frequency bands DIN EN 61000-6-3
0.15…0.5 MHz
Limit 40 to 30 dB
0.5…30 MHz
Limit 30 dB
Class B
Tab.8: Emitted interference

Jetter AG Technical specifications | 4
JX3-PS1 User Manual 13 / 23
Immunity to inter-
ference
Parameter Values Standard
Asymmetric RF, amplitude-modulated
Frequency band 0.15…80 MHz DIN EN 61131-2
DIN EN 61000-6-2
DIN EN 61000-4-6
Test voltage 10 V
AM 80 % with 1 kHz
Source impedance 150 Ω
Criterion A
Bursts
Test voltage 2 kV DIN EN 61131-2
DIN EN 61000-6-2
DIN EN 61000-4-4
tr/tn 5/50 ns
Repetition frequency 5 kHz
Criterion A
Surge voltages, symmetric, line to cable
Series-mode interference tr/th 1.2/50 µs DIN EN 61131-2
DIN EN 61000-6-2
DIN EN 61000-4-5
0.5 kV
Surge voltages, asymmetric, line to earth
Common-mode interference tr/th 1.2/50 µs DIN EN 61131-2
DIN EN 61000-6-2
DIN EN 61000-4-5
0.5kV
Tab.9: DC power supply inputs and outputs

Jetter AG Mechanical installation | 5
JX3-PS1 User Manual 14 / 23
5 Mechanical installation
5.1 Installing the expansion module on the DIN rail
NOTICE Functional impairment caused by unfavorable installation
● Install the device only in vertical position on the DIN rail.
● Keep the minimum distance to surrounding parts.
1
2
3
3
Fig.6: Installing the expansion module on the DIN rail
1DIN rail 2Upper DIN rail latch
3Minimum distance to surrounding parts = 30 mm
1. Disconnect the system from the power supply.
2. Place the upper latch (2) in angled position on the DIN rail (1).
3. Snap the lower latch of the device onto the lower edge of the DIN rail.
4. Slide the device to its intended position.

Jetter AG Mechanical installation | 5
JX3-PS1 User Manual 15 / 23
5.2 Removing the expansion module from the DIN rail
The release latch lets you remove the device from the DIN rail.
2
A
A
1
Fig.7: Dismounting example
1DIN rail 2DIN rail release latch
ADetail view
1. Disconnect the system from the power supply.
2. Remove the device from the mains.
3. Pry the release latch (2) downwards and pull the device off the DIN rail (1).

Jetter AG Mechanical installation | 5
JX3-PS1 User Manual 16 / 23
5.3 Dismounting the enclosure from the backplane module
The upper and lower backplane tab on the module let you pull off the enclosure
from the backplane module.
NOTICE Mechanical damage and impaired EMC immunity
Protection class IP20 is not guaranteed when replacing JX3 modules. If you
touch the EMC clip, you may damage this clip. A damaged clip may impair noise
immunity.
● Do not touch any electronic components after removing the enclosure from
the backplane module.
AA
1
1
Fig.8: Dismounting the enclosure from the backplane module
1DIN rail latch ADetail view
1. Disconnect the system from the power supply.
2. Press the upper and lower latches (1) on the device simultaneously.
3. Keep the latches pressed and pull off the enclosure.

Jetter AG Electrical connection | 6
JX3-PS1 User Manual 17 / 23
6 Electrical connection
NOTICE Improving electromagnetic compatibility
The noise immunity of a system is determined by its weakest component. Cor-
rect connections, lines and shielding are key factors.
● Ensure that the system is EMC-compliant.
● Follow the instructions given in Application Note 016 on our homepage about
EMC-compatible installation of the electric cabinet.
NOTICE Damages to material or functional impairment
Improper implementation of the wiring harness may cause mechanical stress.
● Protect the cables from bending, twisting or chafing.
● Install strain reliefs for the connecting cables.
6.1 Connector specification
6.1.1 Power supply terminal X10
DC24V
0V
POWER
Fig.9: Power supply ter-
minal X10
Pin Signal Description
DC24V +24 V Supply voltage
0V GND Reference potential
Category Description
Terminal X10
Function Power supply
Connector is in included in the scope of delivery.
Connectable wire cross-section 0.2 ... 1.5 mm2
Tab.10: Power supply input X10 - Technical specifications
6.2 Functional test
After switching on, no configuration of the module is necessary.
üThe JX3-PS1 is connected to a JX3 station.
üThe expansion modules to be supplied with power are connected to the right
of the JX3-PS1 module.
►Power up the JX3 station.
ðThe LED R of the JX3-PS1 lights up green if the commissioning has been car-
ried out correctly.

Jetter AG Maintenance and repairs | 7
JX3-PS1 User Manual 18 / 23
7 Maintenance and repairs
7.1 Maintenance, repairs and disposal
Maintenance This device is maintenance-free.
Therefore, for the operation of the device no inspection or maintenance are re-
quired.
Repairs Defective components could cause dangerous malfunctions and could compro-
mise safety.
Only the manufacturer is allowed to repair the device.
Do not open the device!
Disposal of obso-
lete equipment
The device must be disposed of in accordance with the Environmental Product
Declaration EPD. Applicable local environmental directives and regulations must
be complied with. This product must be disposed of as waste electronic equip-
ment. Waste packaging material must be recycled or reused.
Modifications and
alterations to the
device
Modifications and alterations to the device and its functions are not allowed. In
the case of modifications to the device, any liability is excluded.
The original parts are specifically designed for the device. Parts and equipment
from other manufacturers must, therefore, not be used.
Any liability for any damages resulting from the use of non-original parts and
equipment is excluded.
7.2 Storage and shipment
Storage When storing the device observe the environmental conditions given in chapter
“Technical specifications”.
Shipment and pack-
aging
The device contains electrostatically sensitive components which can be dam-
aged if not handled properly. Damages to the device may impair its reliability.
To protect the device from impact or shock, it must be shipped in its original
packaging, or in an appropriate protective ESD packaging.
In case of damaged packaging inspect the device for any visible damage, and in-
form your freight forwarder and the Jetter AG of the damage caused during ship-
ment. If the device is damaged or has been dropped, it is strictly forbidden to use
it.

Jetter AG Service | 8
JX3-PS1 User Manual 19 / 23
8 Service
8.1 Customer service
Should you have any questions, suggestions, or problems, please don’t hesitate
to contact our service representatives. To contact them, please call our technical
hotline or use the contact form on our homepage:
Technical hotline | Jetter - We automate your success.
You are also welcome to send an e-mail to our technical hotline:
[email protected]
Please supply the following information when contacting our technical hotline:
■Hardware revision and serial number
For the hardware revision number, please refer to the nameplate.
■OS version
To determine the operating system version, use the functions of the develop-
ment environment.

Jetter AG Spare parts and accessories | 9
JX3-PS1 User Manual 20 / 23
9 Spare parts and accessories
NOTICE Inadequate accessories might cause damage to the product
Parts and equipment from other manufacturers might impede the function of the
device and cause damage to the product.
● Only use accessories recommended by Jetter AG.
9.1 Spare parts
Component Item no.:
2-pin connector, spring-cage technology 60870409
Terminal labels 60870411
9.2 Accessories
INFO The accessories are not part of the scope of delivery.
Apt accessories can be obtained from Jetter AG.
Component Item no.:
Strain relief 60870963
End clamp for DIN rail 60863970
Screwdriver 60871712