John Lewis 811/12080 User manual

1
John Lewis
Jasper
JasperJasper
Jasper chair
chair chair
chair
Stock number: 811/12080
811/12082
811/22071
811/22072
Thank you for purchasing this chair Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product
Pre
PrePre
Pre-
--
-assemb
assembassemb
assembly preparation
ly preparationly preparation
ly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product A full
checklist of components is given in this leaflet If any components are missing, please
contact the retailer from whom you bought this product

2
A x4pcs B x4pcs C x4pcs
D x9pcs E x1pcs F x1pcs
This product is HEAVY
HEAVYHEAVY
HEAVY, it should be assembled as near as possible to the point of use
TAKE CARE
TAKE CARE TAKE CARE
TAKE CARE WHEN LIFTING
WHEN LIFTINGWHEN LIFTING
WHEN LIFTING to avoid personal injury and (or) damage to the product
This product takes approximately 10
1010
10 MINUTES
MINUTESMINUTES
MINUTES to assemble with 1
11
1 PEOPLE
PEOPLEPEOPLE
PEOPLE
The fittings pack contains SMALL ITEMS
SMALL ITEMSSMALL ITEMS
SMALL ITEMS which should be KEPT AWAY FROM YOUNG
KEPT AWAY FROM YOUNG KEPT AWAY FROM YOUNG
KEPT AWAY FROM YOUNG
CHILDREN
CHILDRENCHILDREN
CHILDREN
Read this leaflet in full before commencing assembly
Fittings
FittingsFittings
Fittings and parts
and parts and parts
and parts checklist
checklistchecklist
checklist

3
Step by step assembly instructions
Step by step assembly instructionsStep by step assembly instructions
Step by step assembly instructions
WARNING: Once chair is constructed ensure all screws and nuts are fully tightened
WARNING: Once chair is constructed ensure all screws and nuts are fully tightened WARNING: Once chair is constructed ensure all screws and nuts are fully tightened
WARNING: Once chair is constructed ensure all screws and nuts are fully tightened
before use
before usebefore use
before use
1
2
These four items (B) should be fitted during step 1
E
B
D
C
M ake sure to use 2 washers

4
3
4
Shorter (rear) leg
Front Leg
A

5
Care and Maintenance
This chair should be cleaned with a dry or damp soft cloth. Do not use abrasive cleaners, which may
damage the surface of the product
Safety Instructions
Never tilt the chair. Ensure the chair is always placed firmly on the ground.
Periodically check the tightness of all screws .
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
J
ohn Lewis Partnership 171 Victoria Street London SW1E 5NN
www johnlewis com