John Lewis Skye User manual

Skye 1 drawer wardrobe
Stock number: 80312610
Thank you for purchasing this Skye 1 drawer wardrobe. Please read the instructions
carefully before use to ensure safe and satisfactory operation of this product.
For spare parts, please contact the TCH John Lewis helpdesk on 01691 770 157
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
You will require a cross head screwdriver to assemble this product. An electric drill may
cause damage to the product and is not recommended.
Please check the pack contents before attempting to assemble this product.
A full checklist of components is given in this leaflet. If any components are missing,
please contact the number on the front of this assembly instruction.
Necessary Tools

This product takes approximately 60 MINUTES to assemble with 2 PERSONS.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM
YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
Fittings and parts checklist

Step by step assembly instructions
Step One
Lay parts (01) & (09), (02) & (03) and add cams (D ).
Fittings (A) add to the doors using screws (C) as shown in the diagram.
PLEASE PLACE THE PARTS ON A SMOOTH SURFACE, in order not to scratch
the paint.
Step Two
Use hinges ( B ) and with screws ( C ) add to the doors.

Step Three
Two people required.
Please position ( 02 ), ( 03 ), ( 05 ) and ( 08 ) parts as shown in the picture. All fittings ( D
)go into the prepared holes with the cam. Side panels ( 02 ) and ( 03 ) attach to the shelves
( 05 ) and ( 08 ).
Please follow same steps to attach the top ( 01 ) and base ( 09 ) as shown in the diagram
below.
If cams don’t lock into place, please use screwdriver to adjust them. After all pieces are
together, please use a screwdriver to tighten up.

Step Four
Two people required.
Attach the back panel ( 04 ) to the wardrobe, use 38 x screws ( E ) to tighten the panel to
the wardrobe.
Step Five
Please attach four legs ( 10 ) to the wardrobe base ( 09 ) as shown in the diagram.

TWO PEOPLE REQUIRED.Please stand the product upright.
Step Six
Take part ( 11 ) left door and attach to the left side ( 03 ) of the wardrobe. Use both fittings
( A ) & ( B ) and connect hinges with their screws. Please follow same steps for the right
door ( 12 ) as shown in the diagram below. Please use screwdriver to adjust the hinges.
Place the hanging rail ( 07 ) on to part ( 06 ) as per picture below.
Step Seven
Please screw 2x handles( F ) into the front doors and secure them with 2x screws( G).

Insert drawer to his place and push the wooden dowels to secure it as per diagram below.
Step Eight
Attach one end of the wall fixing strap ( H ) to the top of the unit with the screw provided
and the other end should be attached to the wall by a competent person.
Care and Maintenance
A beautifully handcrafted range using a combination of solid oak and hand dragged paint
finish over modern materials.

The individual finish makes each piece unique and with the turned legs gives the range a
classic timeless appeal that sits well in a variety of settings.
The chest tops feature an upright frame to keep all your belongings tidy and prevents
losing items between the wall and the back of the chest.
All timber surfaces will change colour and mellow over time. New furniture will initially
vary in shade from items that have been previously purchased.
How to care for your furniture
Try to avoid prolonged exposure to direct sunlight as this may alter the colour and tone of
your furniture over time.
Any spillages that do happen should be wiped up immediately with a clean dry lint free
cloth to avoid marking the surface of the furniture.
Every care has been taken to produce this product, however as the product has been
painted there will be a smell, this will disappear in time after removal of the packaging.
Safety Instructions
General warnings:
Never drag furniture when moving it always lift it. Periodically check all fixings to ensure
none have come loose and re-tighten where necessary. Please take care when handling or
moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for damage or injury caused by incorrectly
installed or assembled furniture.
Specific warnings for heavy items:
It is recommended that before moving heavy objects to a new location they are completely
disassembled to avoid personal injury or damage to the furniture. Please be careful to
retain all fittings when doing this.
TCH John Lewis helpdesk on 01691 770 157 for queries regarding parts.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
John Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com