John Lewis 82011818 User manual

9KG PLASTIC BASE
USER GUIDE
Product Code:
82011818

Getting started
Thank you for purchasing the 9kg plastic base. Please read the instructions and
warnings carefully before use, to ensure safe and satisfactory operation of this
product.
At John Lewis, we are committed to making great products possible. From our
in-house Design Team, to our Buyers, we work together to bring great design to
life.
Our expert Product Technologists work collaboratively with our buyers and
suppliers to assure the legality, safety and quality of the product we sell.
We are all committed to designing and developing products to the highest
industry
standards. We hope you are happy with your product and welcome any
feedback or comments you may have.
John Lewis & Partners
Important safety
information
Warnings
△
!The product is HEAVY, it should only be assembled near point of use.
△
!Keep small parts out of reach of children.
△
!Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Dont’s
Do not over tighten screws or bolts.
Do not stand on the product.

Fittings and parts
checklist
No.
Picture
Name
Qty
PLASTIC BASE
1
CAP
1
POLE
1
ADAPTER
2
Step1
Remove the cap on the top of base.
Step2
Slowly fill the base with water to increase the weight and replace the cap.
Please note:
●Each section has a capacity of 9 litres.
●Once filled, each part will become heavy, take care when lifting.
●Do not fill with water if exposed to freezing temperatures. The formation
and expansion of ice may crack the base.

Step3
Screw in the pole, and insert the compatible adapter.
Please note:
●For 38mm poles, insert the larger adapter for the base.
●For 32mm poles, insert the smaller adapter into the larger adapter then insert
together into the base.
Care and
maintenance
This product is made from plastic and is suitable for outdoor use.
We recommend that you clean your base at the beginning and end of the
season. To clean the base remove all dirt using mild soap and water. Never use
abrasive chemicals or cleaning agents. Rinse thoroughly and allow to dry.
Safety
●This parasol base has been designed for domestic use only.
●Parasol bases can be dangerous if incorrectly installed or assembled, it should
be carried out by a competent person.
●No liability will accepted for damage or injury caused by incorrectly installed or
assembled parasol bases.
●Parasols should not be used in high winds or during inclement weather.
●This parasol base must always be filled to the top.
●Never drag a parasol when moving it, always lift it.
●Periodically check all fixings to ensure none have come loose and re-tighten
where necessary.
●Ensure that the parasol base is always on a solid and level surface at all time.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference