John Lewis Moritz User manual

Moritz Console Table
H74.8 W110 D38cm

103/05/2019
Thank you for purchasing the Moritz Console Table. Please read the instructions and warnings carefully before use,
to ensure safe and satisfactory operation of this product.
We are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert ProductTechnologists work collaboratively with our buyers and suppliers to ensure the legality, safety
and quality of the product we sell.
We are are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
25 mins

203/05/2019

303/05/2019
Your Table
Ref Description Dimensions Qty
Top 110cm x 38cm x 2cm 1
Base unit 73m x 77m x 30cm 1
1
2
1
2

403/05/2019
Ref Description Dimensions Qty
Big screw M5 x 20mm 4
Grub screws 6x6mm 4
Ref Description Dimensions Qty
Allen key #2.5 1
Allen key #3 1
Stainless steel grommet fitting Dia.20 x 12mm 4
Fixtures and ttings
A
C
B
D
E

503/05/2019
Product assembly
Moritz Console Table
Step 1
Parts, fittings and tools
2 C
Step 2
Parts, fittings and tools
2 D
2
C
2
D
x1 turn only
Please note, the base is very heavy and needs to be unpacked as near to it’s final location as possible.Very carefully
remove the base and stem unit from the carton. There is an MDF packing board on top of the stem which needs
to be removed (see StepTwo). To avoid scratches and possible damage carry out all steps on a clean, soft surface
such as a rug or large cloth. With 2 people, carefully tip the table to one side onto a soft surface. Use the allen (C)
key to gently loosen each of the 8 screws by 1 turn only (turn in anticlockwise direction). This helps to prepare for
fixing the glass top in Step Four.
To remove the top MDF packing board, hold the wing nuts and unscrew the allen bolts. Then lift off the MDF
packing board from the top of the base.

603/05/2019
Product assembly
Moritz Console Table
Step 3
Parts, fittings and tools
Step 4
Parts, fittings and tools
1 2
2 A D E
2
A
D
E
1
2
Position the stainless steel grommets (E) on top of the leg stems. Locate the M6 countersink allen head bolts (A)
and very carefully (to avoid cross-threading) tighten the bolts using the allen key (D)
Whilst 1 person holds the glass top (1) the second person should align the grommets on top of the metal stems
(2) with the bosses on the glass top. Carefully lower the glass into position and take care not to scratch the glass at
this stage.

703/05/2019
Product assembly
Moritz Console Table
Step 5
Parts, fittings and tools
Step 6
Parts, fittings and tools
2 C
1 2 B C
1
2
C
B
2
C
Carefully locate the M6 grub screws (B) as shown below.Tighten using the allen key (C) by turning clockwise.
Ensure the leg is pushed hard up to the metal boss (on the glass) whilst tightening. Repeat for all 4 legs.
Using the allen key (C) firmly re-tighten each of the 8 screws on the base (turn in clockwise direction).

803/05/2019
Product assembly
Moritz Console Table
Step 7
Parts, fittings and tools
The table can be levelled using the adjustable feet on the underside of the table base.

903/05/2019
Care guide
How to care for your glass and metal furniture
For glass elements use glass cleaner or soapy water for cleaning, do not use anything abrasive as this may damage
the surface of the product. Note: Glass can scratch in normal use therefore please protect surfaces from
scratches and marks by using mats and coasters.
Protect the metal elements from spillage, sunlight and heat. A slightly damp cloth is the best cleaning agent for the
material. Dry and polish with a non abrasive soft cloth.
Do not use any abrasive cleaner or harsh detergent on the metal elements as this can damage the surface. Avoid
spilling or dropping crumbs of food with a high fat content on the surface as this can permanently mark the metal.
Safety instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to unsure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competant person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
Glass furniture warning
Do not place very hot or very cold items glass surface(s) unless adequately thick table mats are used to prevent
such items from coming into contact with the glass.
Do not sit or stand upon glass surface(s)
Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.
Tempered glass is designed to break into very small fragments for customer safety. On very rare occasions including
when not in direct use, glass can break for the following reasons:-Surface damage and scratches (protect the surface
with mats during use). Please take extra care to ensure no heavy or sharp objects impact this product. -Extremes
of temperature. Avoid areas where the item can become very hot and cold.
Retain these instructions for future reference.
Your feedback is very important to us and we would love to hear your comments on your new furniture.
Please visit our website to leave a review. Thank you.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com