John Lewis 86257002 User manual

Fluted Glass Sideboard
Stock Number: 86257002
H65 W150 D42 cm
YNG TAL 14 / FGMT2 D: 12.02.2020 / RN002

Thank you for purchasing the Fluted Glass Sideboard. Please read the instructions and warnings carefully before use,
to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standarts.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
1
Tools Required
Time to assemble
30 minutes
People to assemble

2
Important safety information
Warnings
The product should only be used on firm, level ground.
Keep small parts ot of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do's
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Dont's
Do not over tighten screws or bolts.
Do not stand on the product.
Don not use power tools to construct as overtightening and panel failure may occur.

3
Your Sideboard
Ref
1
1
Dimensions Qty
H50 W150 D42cm
H20 W3 D1.5cm
1
Description
2
2
2
2
2
4
Main Unit
Legs
H8 W95 D32.5cm
3
3
1
Wide Glass Shelf
H8 W46 D32.5cm
4
4
1
Narrow Glass Shelf

4
Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref Description Dimensions Qty
Fixtures and fittings
supplied (not actual size)
Ref Description Dimensions Qty
A6mm x 70mm
3.5x16mm
8
Allen Head Bolt (Chrome)
B8
Washer
E1
Allen Key M4
F1
Wedge
CScrew 2
DGlass Shelf Holder 8

5
Product assembly
Fluted Glass Sideboard
86257002
Step 1
Parts, fittings and tools

5
Fluted Glass Sideboard
86257002
Step 2
Parts, fittings and tools
Step 3
Parts, fittings and tools

A
A
A
A
AB
B
B
B
B
B
B
B
B
B
1
1
E 2
2
2
2
2
Step 5
Parts, fittings and tools
E
B
6
Fluted Glass Sideboard
86257002
Step 4
Parts, fittings and tools

7
Step 7
Parts, fittings and tools
Fluted Glass Sideboard
86257002
3
3
4
4
Step 6
Parts, fittings and tools
D
D
D
D

8
Fluted Glass Sideboard
86257002
Step 8
Parts, fittings and tools

9
Wedge Instructions
Parts, fittings and tools
Fluted Glass Sideboard
86257002
F
If the sideboard is not level on your floor use the wedge (F) provided, and
snap it o so that it does not protrude out from the cabinet’s leg, you can
also snap it lengthways if desired.
F
F
F

10
Fluted Glass Sideboard
86257002
Wall Fixing Instructions
Parts, fittings and tools
1Place your product in the final
position. Loosen the screws on the
metal brackets just enough so that
the slotted bracket can be extended
to meet the wall.
2Then re-secure the screws.
3Mark the wall for drilling through
the hole in the short face of the
bracket.
Then remove the unit from the wall
so that the marked holes can be
drilled.
Ensure you use an appropriate fixing
type for your wall (see page 11).
Then return the unit to position.
4Secure the unit to the wall fixings
with own screws through the
brackets.
5Finally add the extra securing
screws to the holes in the long faces
of the brackets.
Warning
Serious or fatal crushing
injuries can occur from
furniture tipping over.
To prevent this furniture
tipping over it must be
permanently fixed to the
wall.
C
12 3
C
4 5

11
Wall attached item only.
A guide to wall mounting and fixings
Warning
Serious or fatal crushing injuries can occur from furniture tipping over.
To prevent this furniture from tipping over it must be permanantly fixed to the wall.
Wall fixing screws are not included, since dierent wall materials require dierent types of screws / fixings.
Please ensure you use the correct screws / fixings for your type of walls and seek professional advice if you
are not sure.
Failure of the product due to incorrect fixings is the responsibility of the installer.
Important: When drilling into the walls always check that there are no hidden wires or pipes etc.
Types of walls
You can use one of the following types of wall plug if your walls are made of
brick, breezeblock, concrete, stone or wood.
1. General Purpose wall plug
Generally aerated blocks should not be used to support heavy loads, use a
specialist fitting in this case. For light loads, general - purpose wall plugs can
be used.
2. Plasterboard wall plug
For use when attaching light loads on to plasterboard partitions.
3. Cavity Fixing wall plug
For use with plasterboard partitions or hollow wooden doors.
4. Cavity Fixing - Heavy Duty wall plug
For use when fitting or supporting heavy loads such as shelving, wall cabinets
and coat racks.
5. Hammer Fixing wall plug
For use with walls stuck with plasterboard. The hammer fixing allows it to be
fixed to the wall rather than the plasterboard. Always check the fixing is
secure to the retaining wall.
6. Shield Anchor wall plug - Heavy loads
For use with heavier loads such as TV and Hi-Fi speakers and satellite dishes
etc.
Safety: Periodically check all fittings and wall fixings to ensure they
have not come loose and retighten as necessary.

12
Safety Instructions
General warnings
Never drag furniture when moving it, always lift it. Periodically check all fixings to ensure none have come loose and
re-tighten where necessary. Please take care when handling or moving the furniture as careless handling may cause
damage or injury. Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent
person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Specific warnings for heavy items
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. (For fully or partial
assemble items).
Storage units over 600mm
Installation shall be carried out exactly according to the manufacturer’s instructions – otherwise a safety risk can
occur if incorrectly installed; a warning shall be given to the consumer to notify them of related risks.
WARNING In order to prevent overturning this product must be used with the wall attachment device
provided.
Loading limit of base unit
The recommended loading limit for the base unit is 65 kg.
Warnings specifically for any product containing glass
If the glass is chipped or broken stop using the product and consult the manufacturer or supplier.
Tempered glass is designed to break into very small fragmants for customer safety. On very rare occasions including
when not in direct use, glass can break for the following reasons:
- Surface damage and scratches (protect the surface with mats during use). Please take extra care to ensure no heavy
or sharp objects impact this product.
- Extremes of temperature. Avoid areas where the item can become very hot and cold.
WARNING:
a) Do not place very hot or very cold items directly on glass surafces.
b) Do not sit or stand on glass surfaces.
c) Do not strike the glass with hard or pointed items, or use the glass as a chopping surface.
d) Do not use washing powders ir any other sustances containing abrasives, as these may scratch the glass.
Additional Requirements for tables
Handle with care! A damaged edge or scratched surface can in rare cases cause the glass to fail unexpectedly into
many small pieces. Glass is most vulnerable when struck from the side.
Care Instructions

Wood Furniture
Wood displays dierent grain patterns depending on which way they cut - for example, the ‘medullary ray’ which can
appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the
wood. Some furniture is also deliberately aged and rustic.

All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items that
have been previously purchased.


13
How to care for your wood or painted furniture
Furniture with a hard lacquer, painted surface should be dusted with a dry cloth.

Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and
ensure that a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central
heating can cause damage such as warping.
Glass
Use glass cleaner or soapy water for cleaning, do not use anything abrasive as this may damage the surface of the
product.

Protect surfaces from scratches and marks by using mats and coasters.

Metal
Do not use any abrasive cleaner or harsh detergent as this can damage the surface.

Your feedback is very important to us and we would love to hear your comments on your new furniture. Please
visit our website to leave a review.Thank you.
Retain these instructions for future reference.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com