John Lewis Medan 2 door wardrobe User manual

Medan 2 door wardrobe
Stock number: 803 13520
H195 W100 D60cm

Tools required
Time to assemble
1
Thank you for purchasing the Medan wardrobe. Please read the instructions and warnings carefully before
use, to ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
90 Minutes
People to assemble

Important safety information
Warnings
The product should only be used on firm, level ground.
Keepsmall parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
2
01244 689949

Your wardrobe
100 x 60 x 5.3cmTop panel
Back bar
Bottom unit
Back
Door
Right side panel
Left side panel
Back bar
1
1
3
Ref Description Dimensions Qty
2
3
2
1
1
Please note: Part 6 has two
grooves.
Please note: Part 7 has one
groove.
150.5 x 60 x 3.5cm
150.5 x 60 x 3.5cm
150.1 x 45.2 x 2.2cm
92.6 x 46 x 0.5cm
91 x 5 x 2.2cm
91 x 5 x 2.2cm
90.6 x 52 x 24.6cm

4
Fixtures and fittings
Screw M3.5 x 15 mm
Bolt
Allen key
M6 x 45 mm
M4 x 100 mm
Hanging rail cup
Screw M3 x 15 mm
Dowel M8 x 30 mm
Bolt M6 x 35 mm
Hanging rail
Hinge
Strap
Washer
J
L
M
K
40
12
6
2
8
16
2
1
6
2
2
A
B
C
D
E
F
G
HMagnet 4
IKnob 4
N
O
Screw
Curved washer
Ø25 x 900 mm
M6 x 16 x 1 mm
M4 x 15 mm 2
6

Product assembly
Medan 2 door wardrobe
803 13520
Step 1
Parts, fittings and tools
I8
Step 2
Parts, fittings and tools
2
5
3 A G
I
8
I
G
A
2 3
&

Medan 2 door wardrobe
803 13520
Step 3
Parts, fittings and tools
26 7
Step 4
Parts, fittings and tools
5
6
BD O
2
6
7
B
D
O
6
5
5
5

Medan 2 door wardrobe
803 13520
Step 5
Parts, fittings and tools
3 B D O
Step 6
Parts, fittings and tools
C1
7
D E
3
B
D
O
C
1
D
E

Medan 2 door wardrobe
803 13520
Step 7
Parts, fittings and tools
8
Step 8
Parts, fittings and tools
GJ
8
B D E
8
B
D
E
G
J

Medan 2 door wardrobe
803 13520
Step 9
Parts, fittings and tools
4
9
Step 10
Parts, fittings and tools
AF H I K
4AF H I K
4
A
F
H
I
K
F
H
4
A
F
H
I
K