John Lewis EMPEROR CONSOLE TABLE MARBLE User manual

EMPEROR CONSOLE TABLE MARBLE
Thank you for purchasing this PRODUCT. Please read the instructions carefully before
use to ensure safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools Allen key (M4) Spanner
Please check the pack contents before attempting to assemble this product. A full
checklist of components is given in this leaflet. If any components are missing, please
contact the retailer from whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use.
TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 25 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.

Fittings and parts checklist
Item
Description
Qty
1
Top
1
2
Legs
2
3
Metal bar
1
4
Top frame
1
Item
Description
Qty
A
Flat washer
14
B
Hexagon bolt
14
C
Leveler
4
D
Screw nut
4
E
Allen key M4
1
F
Spanner
1

Step by step assembly instructions
Step One
Attach metal bar (3) to legs (2) on both side of the bar using 6 x washers (A) and bolts
(B) by allen key (D) as supplied.
We would advise that at this stage the top remains inside the original packaging to
avoid scratching the top.
___________________________________________________________
Step Two
Attach assembly from step one to top frame (4) using 8 x washers (A) and bolts (B) by
allen key (D) as supplied.
___________________________________________________________
Step Three
Carefully place table top (1) upside down on a clean carpet or blanket to avoid
damage to the surface.

Attach 4 x levelers (C) to assembly from step two then attach frame part to the table
top using 4 x screw nuts (D) and spanner (F) supplied.
IMPORTANT: Tighten by hand only, to avoid damage to the legs.
___________________________________________________________
Step Four
Carefully stand console to upright position.
___________________________________________________________
Step Five
Secure the console to the wall using the anti-topple kit provided, following the
instructions detailed below. When fitted properly, the device will not be visible during
general product use.

IMPORTANT: Securing your furniture to the wall with this kit will prevent injury/property
damage from unexpected tipping of furniture, particularly to avoid serious injury to
children.
IMPORTANT: The device must be fitted to this product in accordance with the following
parts: 1 x plastic cable tie, 1 x plastic wall bracket.
IMPORTANT: Fittings into the wall are not included. You will need to choose
screws/fittings which are appropriate for securing the device to the type of walls you
have. If you are unsure what wall fixing you require, please seek professional advice.
The anti-topple device must not be modified or altered in any way.
1. Position your furniture in desired location in your home. Take the plastic cable tie and
feed through loop hole provided under the table frame
2. Then feed the wall bracket onto the cable tie and press bracket firmly onto the wall
flat.
3. Mark with a pencil through the bracket holes onto the wall where the wall fixings will
need to be inserted. Temporarily move furniture from wall and prepare necessary screw
holes into your wall.
4. Fit the plastic wall bracket firmly to your wall using suitable wall fixings. Replace
furniture back to your desired position, then attach cable tie through wall bracket and
frame firmly. It should look like the below diagram.
Your furniture is now safe to use in your home. Finish.

PLEASE NOTE WHEN LIFTING OR MOVING THE TABLE ALWAYS DO SO FROM
THE UNDER FRAME AND NOT THE TABLE TOP
Care and Maintenance
How to care for your marble top
The surface should be protected with coasters, trivets or placemats.
All spills should be blotted up immediately, do not wipe the spill as this may make it
spread.
Clean the surface with a clean soft cloth (non-abrasive) and mild detergent or stone
soap. Do not use cleaners containing acids.
Safety Instructions
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where
necessary.
Please take care when handling or moving the furniture as careless handling may
cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for damage or injury caused by
incorrectly insalled or assembled furniture.
It is recommended that before moving heavy objects to a new location they are
completely dis-assembled to avoid personal injury or damage to the furniture. Please
be careful to retain all fittings when doing this.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE