John Lewis BRONTE EXTENSION DINING TABLE User manual

1
BRONTE EXTENSION DINING TABLE
Thank you for purchasing this table. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full
checklist of components is given in this leaflet. If any components are missing, please
contact the retailer from whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use.
TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
(Include if relevant)
This product takes approximately 25 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.

2
Fittings and parts checklist
Item
Description
Qty
Item
Description
Qty
Item
Description
Qty
1
Top table
1
2
Leg
4
3
Top table
extension
1
A
Nut
8
B
Wrench Key
1
C
Flat washer
8
D
Spring washer
8
1
2
3

3
Step by step assembly instructions
Step two
Attach the legs (2) by inserting the leg bolt into the hole provided on the
corner wooden frame.Attach flat washer (C), spring washer (D) then nuts
(A) and tighten using wrench key (B).
Note : Remove plastic cover from bolts
Step one
Place top table (1) upside down on the clean carpet or
blanket to avoid damage to the surface

4
Step three
Lift the table up and over.
And stand on its legs.
DO NOT PULL THE TABLE OVER ONTO
THE LEGS. THIS COULD DAMAGE THE
TABLE FRAME
Step four
Open carefully the table top by unlock the fitting underneath and slide
open the top.
UNLOCK

5
Step five
Remove carefully the extension leaf (3) inside by moving up one edge of
the top and slowly take it fully out from the table and remove packaging.
3
Step six
Place the extension top between the opened top then close the top by
pushing the ends together in the same direction. Please kindly assure the top pins
matched before we push the top together

6
FINISH
Safety Instructions :
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-
tighten where necessary.
Please take care when handling or moving the furniture as careless
handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be
carried out by a competent person. No liability will be accepted for
damage or injury caused by incorrectly insalled or assembled furniture.
It is recommended that before moving heavy objects to a new location
they are completely dis-assembled to avoid personal injury or damage to
the furniture. Please be careful to retain all fittings when doing this.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Step seven
Lock the fitting underneath the table top.
LOCK