John Lewis Liv 413 92421 User manual

Liv Clothes Rail
Stock number: 413 92421
H131 W80 D26cm

2
Thank you for purchasing the Liv clothes rail. Please read the instructions and warnings carefully before use, to
ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team to our Buyers, we work together to bring great designs to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Tools required
Time to assemble
I hour
People to assemble

3

4
Your clothes rail
Ref Description Dimensions Qty
Left side panel 1310x260x18mm 1
Right side panel 1310x260x18mm 1
Top back panel 764x91x18mm 1
Shelf 764x260x18mm 4
Hanging rail
Ø25x764mm
1

5
Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref Description Dimension Qty
CO CO
Confirmat screw 7x45mm 18
Cam 15x11mm 2
Cam Stud M6x34mm 2
Dowel Ø8x30mm 4
Female connector M4x14mm 4
Male connector M4x35mm 4
Felt pad 60x15x3mm 2
Fixtures and fittings
supplied (Not actual size)
Large allen key 4x65mm 1
Small allen key 3x45mm 1
Wall fixing screw (See page10) Ø9.5x50mm 2

6
Product assembly
Liv Clothes Rail
413 92421
Step 1
Parts, fittings and tools
Step 2
Parts, fittings and tools
Insert cam studs C into the allocated holes in the side panels
and tighten clockwise. Please do not overturn!
Then gently insert dowels D as shown.
Join the two side panels 1 and 2 with all shelves 4 and top rail part 3.

7
Step 3
Parts, fitting and tools
Step 4
Fittings
Mount the hanging rail using two confirmat screws A as shown.

8
Step 5
Fittings and tools
Warning
Serious or fatal injuries can occur from furniture tipping over.
To prevent this furniture from tipping over, it must be permanently
fixed to the wall.
Insert cams B as shown and gently tighten clockwise.
Please do not overturn, as this will damage your
fittings.
Step 6 – wall fixing
This unit has been designed to be permanently fixed to the wall.
Please see page 10 for guidance.

9
Step 7 – Connecting with other Liv wall units
Parts, fittings and tools
x8
Connectors E&F supplied with this unit can be used for connecting to other
Liv units as shown.

10
A guide to wall mounting and fixings
Warning
In order to prevent overturning this product must be permanently fixed to the wall.
Wall fixing screws are normally not included, since different wall materials require different types of
screws / fixings. Please ensure you use the correct screws / fixings for your type of walls and seek
professional advice if you are not sure.
Installation shall be carried out exactly according to the instructions provided – otherwise a safety risk
can occur if incorrectly installed. Failure of the product due to incorrect fixings is the responsibility of
the installer.
Important: When drilling into the walls always check that there are no hidden wires or pipes etc.
Types of walls
You can use one of the following types of wall plug if your wall is made
of brick, breezeblock, concrete, stone or wood.
1. General purpose wall plug
Generally aerated blocks should not be used to support heavy loads,
use a specialist fitting in this case. For light loads, general – purpose wall
plugs can be used.
2. Plasterboard wall plugs
For use when attaching light loads on to a plasterboard partitions.
3. Cavity Fixing wall plug
For use with plasterboard partitions or hollow wooden doors.
4. Cavity fixing – Heavy Duty wall plug
For use when fixing or supporting heavy loads such as shelving, wall
cabinets and coat racks.
5. Hammer fixing wall plug
For use with walls stuck with plasterboard. The hammer fixing allows it
to be fixed to the wall rather than the plasterboard. Always check the
fixing is secure to the retaining wall.
6. Shield Anchor wall plug – Heavy Loads
For use with heavier loads such as TV and Hi-Fi speakers and satellite
dishes etc.
Care and maintenance
Safety: Periodically check all fittings and wall fixings to ensure
they have not come loose and retighten as necessary.