John Lewis MIRA 836 23502 User manual

Stock number:
L140 W34 H45 cm
MIRA bench oak
836 23502

People to assemble
Time to assemble
1
20 minutes
Thank you for purchasing the MIRA bench oak. Please read the instructions and warnings carefully before use, to
ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making as great products as possible.
From our in-house Design Team, to our buyers, we work together to bring great design to life.
Our expert product technologists work collaboratively with our buyers and suppliers to assure the legality,
safety and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
Tools required

03456 049 049
1 2 3
4
7
5 6
8 9
0
John Lewis
Autochoice'Furniture'
Important safety information
2
Warnings
The product should only be used on firm ,level ground.
Keep small parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do's
Don'ts
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.

1
2
1
2
2
Your Bench
3
Internal dimensions
Stock Number: 836 23502
Bench overall size: L140 W34 H45 cm
Internal overall size: L112 W6 H37.5 cm
Qty
DimensionsDescreptionRef
1400mm x 340mm x 74mm
Bench top
426mm x 348mm x 130mm
leg
1
2

1
70 800
mm 20 30 40 50 6010
A
B
C
D
E
4
Fixtures and fittings
supply (actual size)
Ref Descreption Dimensions
Fixtures and fittings
supply (not actual size)
Qty
10
Descreption QtyDimensionsRef
Fixtures and fittings
4
Bolt M8 x 45mm
6
Spring washer
Washer
Allen key L
M8
M8
5mm
10
1
Bolt M8 x 65mm

2
2
1
1
1
1
B
D
E
D
BC
C
E
5
Product assembly
MIRA bench oak
Step 1
Parts and fittings
836 23502

2
2
1
1
1
1
A
A
C
D
E
E
CDE
C
D
B
B
6
Product assembly
MIRA bench oak
Step 2
Parts and fittings
836 23502

2
2
1
1
1
E
D
BC
1
C
B
D
E
7
Product assembly
MIRA bench oak
Step 3
Parts and fittings
836 23502

2
1
1
Max.
200kg
2
D
1
1
E
D
BC
A
E
D
B
C
A
C
E
8
Product assembly
MIRA bench oak
Step 4 Final assembly
Parts and fittings
836 23502
Returning the bench taking care
not to pivot on the legs.
Bench specific warnings
Never tilt the bench. Ensure the bench
is always placed firmly on the ground.
Regularly check leg attachment and
retighten screws as necessary.
Do not use bench if legs are unstable.
Please check fixings and tighten as required.

Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No
Care and maintenance
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Care guide
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
Safety Instructions
Retain these instructions for future reference.
Never drag furniture when moving it, always lift it.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Wood Furniture
Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary ray’
which can appear on solid wood furniture is a mark of good quality timber - these are just characteristics of the
natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow a distinctive pattern to be created on some surfaces, such as tabletops and drawer
fronts by the way slivers are arranged.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been previously purchased.
How to care for your wood furniture
Furniture with a whitened oil and painted surface should be dusted with a dry cloth.
Water and other liquids can cause discoloration and damage to the wooden surface. In case any liquids are spilled
on the surface, remove immediately with a clean cloth. Avoid rubbing the spilled liquid into the surface, but wipe
gently, using a clean, firmly wrung damp cloth. Dry afterwards using a clean, dry cloth.
Make sure all surfaces are protected from heat by mats and coasters. Wipe up spills immediately and ensure that
a mat or pad is placed under paper if you are writing.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat
sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home
heating can cause damage such as warping.