John Lewis Riley Guest Bed 800/65201 User manual

For product support or spare parts please call
the John Lewis Helpline;
T: 01244 689949
E: [email protected]m
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Page 1
Please check the pack contents before attempting to assemble this product. A full checklist of
compenents is given in this leaet. If any components are missing, please contact the
John Lewis helpline.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 40 MINUTES to assemble with 2 PEOPLE.
The ttings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
John Lewis
Riley Guest Bed
Stock code 800/65201, 800/65202
Thank you for purchasing this Riley guest bed. Please read the instructions carefully before use to ensure
safe and satisfactory operation of the product.

Page 2
Parts
Headboard x 1
Footboard x 1
Top Rail x 2 Side Rail x 2
Main Bed Parts and Fittings Check List
Slats x 1
Fittings
x 4
x 8
x 8
x 4
x 4
(G1) (G2)
(G3) (G4)
(G5)

Step 1
Attach the top rail (G3)to the head and foot board using bolt (H1) and wooden dowel (H4) to attach.
Step 2
Page 3
Secure 2 side rails (H4) on to the head and foot boards using bolts (H2).
G3
G1/G2
G1
G1
G1
G4
G2

Step 3
Page 4
G5
G1
G4
along the side rails. (4 on each side).

Page 5
PARTS CHECKLIST
FITTINGS CHECKLIST
G1
G2
G3
G4
G5

Page 6
G4
G1
G4
G3
G2
G2
Place head panel (G1) at the top of the side rail (G4). Join the top and bottom xing holes with dowels (H6).
Join the middle hole with the 50mm bolt (H2) and insert barrel nut (H7) into the side rail (G4), then insert the
wood button (H9) into the end of the bolt. Secure 50mm bolt (H2) with Allen Key. (Repeat on foot board panel).
Attach the leg (G2) to the cross rail (G3) using dowel (H6) and barrel nut (H7), secure with bolt (H1). Repeat
this for the other leg.

Page 7
Place the spring and metal plate on the top leg (G2) into the slots on the underbed. Attach the spring
with pan head screw (H5) and secure the metal plate with 30mm bolt (H3).
G2
Caution: Please do not place the truckle upon its side
as it features a spring mechanism that could cause
potential injury.

H3
H8
H8
H8
H8
G3
G2
G2
G2
G2
H3 x 8
Step 4
Place the slats (G5) into the underbed and secure in place using M4 x 35mm Screw (H3 x 8), into the pre - drilled
holes as shown in the below diagram.
Step 5
Push the castor wheels (H8) into the top of the legs (G2) as shown in the diagram below.
Caution: Please do not place the truckle upon its side
as it features a spring mechanism that could cause
potential injury.

Safety Instructions
If you require any additional information or have any issues with this product please call the John Lewis
Helpline on 01244 689949 or email [e-mail]
J
ohn Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com
Care and Mainten ance
This product complies with BS EN 1725 1998.
Wood Furniture
Wood displays dierent grain patterns depending on which way the wood is cut. For example, the‘medullary
ray’which can appear on oak furniture is a mark of good quality timber. These are just characteristics of the
natural beauty of the wood. Some furniture is deliberately age and rustic.
Wood veneers also allow distinctive patterns to be created on at surfaces, such as table tops and drawer fronts
by the way the slivers are arranged.
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from
items that have been purchased previously.
How to care for your wood furniture
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help maintain its luster.
Spray polishs are best avoided as they contain silicones which may spoil the furnitures surface by
building up over time.
Our furniture will endure most temperatures ain the home, but it is best to avoid placing furniture next to
heat sources such as radiators or res. Be particularly careful with solid wood as the lack of humidity
caused by central heating can cause damage such as warping.
Never drag furniture when moving it, always lift it.
Periodically check all xings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture, as careless handling can cause damge or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent adult.
No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
During assembly children should be kept away from the product due to possible risk of injury. Do not use
this item if any components are missing or damaged.
It is recommended that before moving heavy objects to a new location they are completely dissembled to
avoid personal injury or damage to the furniture. Please be careful to retain all ttings when doing this.