John Lewis 816/84102 User manual

1
John Lewis
Stan bookcase tall
Stock number: 816/84102
Thank you for purchasin this bookcase. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attemptin to assemble this product
Necessary Tools
Please check the pack contents before attemptin to assemble this product. A full checklist of
components is iven in this leaflet. If any components are missin , please contact the retailer
from whom you bou ht this product..
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN L FT NG to avoid personal injury and (or) dama e to the product.
This product takes approximately 30 M NUTES to assemble with 1 PERSON.
The fittin s pack contains SMALL TEMS which should be KEPT AWAY FROM YOUNG
CH LDREN.
Read this leaflet in full before commencin assembly.

2
Fittings and parts checklist
Wall fixing - if in doubt seek professional advice
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily
pull away from the
core structure
Brick or Masonry
Use an appropriate
wall plug provided you
are sure your wall is
sound
Cavity wall
Special toggle
wall plugs are
needed. Seek
expert advice

3
Step by step assembly instructions
WARN NG: Once bookcase is constructed ensure all screws and nuts are fully tightened
before use

4
Step One
1. ttach dowel part E and screw part B to panel 13
2. ttach panel 8 to panel 13 and secure with cam lock
part
3. dd cover, part C
Step Two
1. ttach dowel part E and screw part B to panel 8
2. ttach panel 12 to panel 8 and secure with cam lock
part
3. dd cover, part C

5
Step Three
1. ttach dowel part E and screw part B to panel 7
2. ttach panel 7 to panel 12 and 13 and secure with cam lock part
3. dd cover, part C
Step Four
1. ttach dowel part E and screw part B to panel 7
2. ttach panel 2x10 to panel 7 and secure with cam lock part
3. dd cover, part C

6
Step Five
1. ttach dowel part E and screw part B to panel 5
2. ttach panel 5 to panel 10 and 10 and secure with cam lock part
3. dd cover, part C
Step Six
1. ttach dowel part E and screw part B to panel 5
2. ttach panel 11 to panel 5 and secure with cam lock part
3. dd cover, part C

7
Step Seven
1. ttach dowel part E and screw part B to panel 6
2. ttach panel 6 to panel 11 and secure with cam lock part
3. dd cover, part C
Step Eight
1. ttach dowel part E and screw part B to panel 6
2. ttach panel 2x10 to panel 6 and secure with cam lock part
3. dd cover, part C

8
Step Nine
1. ttach dowel part E and screw part B to panel 5
2. ttach panel 5 to panel 10 and 10 and secure with cam lock part
3. dd cover, part C
Step Ten
1. ttach dowel part E and screw part B to panel 5
2. ttach panel 9 to panel 5 and secure with cam lock part
3. dd cover, part C

9
Step Eleven
1. ttach dowel part E and screw part B to side 3 and 4
2. ttach side 3 to other panels 13 and secure with cam lock part .
3. Do the same with side 4
4. dd cover, part C
Step Twelve
1. ttach dowel part E and screw part B mid of top 1 and dowel D and the ends
2. ttach top 1 to side 3+4 and panel 9 and secure panel 9 with cam lock part
3. Secure top 1 to side 3+4 with bolt F and washer G.
4. Do the same with bottom 2
5. dd cover, part C

10
Step Thirteen
1. ttach strap part I with screw K and washer J
Screw into top of bookcase
Step fourteen
1. ttach strap to wall. Use wall
plug/screw (not included) which
is recommended for your kind of
wall. Put bookcase against the
wall. Make hole for the strap,
insert plug(if needed), fasten the
strap with a screw
Care and Maintenance

11
This bookcase should be cleaned with a dry or damp soft cloth. Do not use abrasive cleaners, which
may damage the surface of the product
Safety Instructions
Never tilt the bookcase. Ensure the bookcase is always placed firmly on the ground.
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary .
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. ssembly should be carried out by a competent person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
This product is designed to be fixed securely to a sound wall in the matter stated.
It must under no circumstances be used free-standing. No liability will be accepted for damage or injury
caused by inadequate fixing or use without fixing.
LEASE KEE THESE INSTRUCTIONS FOR FUTURE REFERENCE
J ohn Lewis Partnership 171 Victoria Street London SW1E 5NN
www.johnlewis.com