John Lewis 57040107 User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference
Care instructions
Wipe clean with a soft dry cloth.
Maximum load of 6kg.
Warnings!
The fittings pack contains small items which should be kept away from young children.
SHAKER OAK 5 HOOK COAT RACK
USER GUIDE
Assembly instructions
Place template (B) on the wall. Please use a spirit
level to ensure that the template is straight. Drill
the required holes in the wall using the template
and follow the guidance on the'Wall Fixings' section.
Step 1 Insert the wall plugs.Step 2
Screw in the screws (D).Step 3 Hang the coat rack.Step 4
C
B
D
A
D
Product Code:
57040107
57040119

Pre-assembly
preparation
No. Picture Name
Hook 1
Qty
A
No. Picture Name
Template 1
Qty
B
Wall
Plug 2
CScrew 2 D
Fittings and parts
checklist
Helpful advice
before you begin
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the
3. Assemble this product on a soft surface.
4.
tightened during initial assembly. Only upon completion of the assembly should all
5.
fully tightened.
6.
7. Do not use any other tools other than those recommended to build this product.
Keep out of reach of small children. It contains small parts which might present a
choking hazard.
You can use one of the following types of wall plug if your walls are made of brick,
breezeblock, concrete, stone or wood.
Warning:
installer.
Important - When drilling into the walls always check that there are no hidden
wires orpipes etc.
Take care when drilling onglazed tile surfaces in case the drill slips.
KEY INFORMATION
General Purpose wall plug
Generally aerated blocks should not be used to support
loads, general – purpose wall plugs can be used.
Plasterboard wall plug
For use when attaching light loads on to plasterboard
partitions.
Cavity Fixing wall plug
For use with plasterboard partitions or hollow
wooden doors.
Cavity Fixing – Heavy Duty wall plug
such as shelving, wall cabinets and coat racks.
HammerFixing wall plug
For use with walls stuck with plasterboard. The hammer
retaining wall.
Shield Anchor wall plug –Heavy loads
For use with heavierloads such as TV and Hi-Fi
speakers and satellite dishes etc.
FIXINGS
GUIDE TO WALL MOUNTING & FIXINGS
Phillips head screwdriver
and spirit level required
Thank you for purchasing this product. Please read the instructions and check pack
contents carefully before starting assembly of this product. A full checklist of
components is given in this leaflet. If any components are missing please contact
John Lewis and partners customer services.
This product will take 1 person approximately 20 minutes to assemble.
The fitting pack contains small items which could present a choking hazard and should
be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.