John Lewis Swirl Bed - Kingsize 803 58802 User manual

Swirl Bed - Kingsize
Stock number: 803 58802
H130 W157 D207cm

110/09/20
Thank you for purchasing the John Lewis & Partners Swirl Bed Kingsize. Please read the instructions and warnings
carefully before use, to ensure safe and satisfactory operation of this product.
At John Lewis & Partners, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to ensure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis & Partners Team
50 mins
No tools required

210/09/20
03456 049 049

310/09/20
Your Bed
1
2
3
4
5
6
7
12 3
4 5 6
7
Ref Description Dimensions Qty
Headboard 157.5cm x 130cm x 3.5cm 1
Footboard 157.5cm x 35.5cm x 3.5cm 1
Side rails 200cm x 10.8cm x 4.2cm 2
Slats 75.2cm x 5.5cm x 1cm 32
Cross rails 151.8cm x 8cm x 2cm 2
Support legs 27.7cm x 8cm x 2.5cm 2
Centre rail 195.5cm x 8cm x 2.2cm 1

Ref Description Dimensions Qty
Large allen bolt M8 x 20mm 8
Flat washer M8 x 1.5mm 8
Small allen bolt M6 x 16mm 16
Allen head sleeve nut M6 x 18mm 8
Ref Description Dimensions Qty
Allen key #4 2
Allen key #5 1
Plastic Gasket 4
Side slat holder 32
Centre slat holder 16
Fixtures and ttings
A
D
E
B
C
F
410/09/20
G
H
I

510/09/20
Step 1
Parts, fittings and tools
Step 2
Parts, fittings and tools
Carefully place the headboard (1), footboard (2) and one of the side rails (3) near where the product will be used.
Locate plastic gasket (G) and place between the headboard and side rail, aligning the holes as in the image above.
Fix the side rail to the headboard using large allen bolts (A), washer (B) with allen key (F) through the aligned holes,
do not fully tighten the bolts at this stage. Repeat this step to fix the side rail to the footboard.
Finally, repeat this process again to secure the remaining side rail to the other side of the headboard and fooboard.
Locate the support rails (5) at the ends of each side rail (3) and secure using small allen bolts (C) with allen key (E).
Now fully tighten all the allen bolts from steps 1 and 2 using the allen keys.
1
2
3
A
B
F
G
5
C
E
Product assembly
Swirl Bed - Kingsize
803 58802
12 3 A B F G
5C E 3
3

610/09/20
Step 3
Parts, fittings and tools
Step 4
Parts, fittings and tools
Locate the support legs (6) and screw the adjustable feet all the way into the leg.This will be adjusted in a later
step.
Locate the centre rail (7) and attach the support legs (6) using small allen bolts (C) and the allen head sleeve nuts
(D).Tighten using 2 allen keys (E), one in the allen bolt, one in the sleeve nut.
6
7
C
D
E
76 DC E
6
6
Product assembly
Swirl Bed - Kingsize
803 58802

710/09/20
Step 5
Parts, fittings and tools
Step 6
Parts, fittings and tools
DC E
7
Using small allen bolts (C) and and the allen head sleeve nuts (D), attach the centre rail to the middle of the cross
rails. Use the allen keys (E) to tighten the allen bolts and sleeve nuts together.
7
C
D
E
5mm
Carefully move the bed into it’s intended location. Adjust the feet on the support legs (6), turn until they both sit at
5mm above the hard part of the floor.
Product assembly
Swirl Bed - Kingsize
803 58802
6
6

810/09/20
Step 7
Parts, fittings and tools
Locate the plywood slats (4), side slat holders (H) and centre slat holders (I). Firstly, insert all the centre slat
holders into the centre rail. Insert one end of each plywood slat into the centre slat holder, insert the other end
of the slat into a side slat holder, then insert the side slat holder into the side rail. Repeat this step with all of the
slats; starting at the headboard and working your way down to the footboard until complete.
H I
4
4
H
I
Product assembly
Swirl Bed - Kingsize
803 58802

Care and maintenance
Metal furniture
This bed should be cleaned using a soft damp cloth and dried immediately. Do not use a very wet cloth or allow
any liquid contact for a long period of time as this can permanently damage the surface.
Do not use abrasive cleaner or harsh detergents as this can damage the surface.
Do not drag any object across the bed as this can cause permanent damage.
Safety instructions
Never drag furniture when moving it.Always lift it.
Periodically check all fixings to ensure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
During assembly children should be kept away from the product due to possible risk of injury.
Do not use this item if any components are missing or damaged.
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to
avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
This product complies with BS EN 1725:1998.
If you require any additional information or have any issues with this product please call the John Lewis &
Partners helpline on 03456 049 049.
Retain these instructions for future reference.
Your feedback is very important to us and we would love to hear your comments on your new furniture.
Please visit our website to leave a review. Thank you.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
910/09/20