Johnson Controls Tyco PowerSeries Pro HS3032 User manual

intrusion
To download the full manual and register your product, please visit:
www.DSC.com/m/29010119 or scan the QR code to the right.
HS3032 / HS3128 / HS3248 USER GUIDE UK
WARNING: This manual contains information on limitations regarding product use and
function and information on the limitations as to liability of the manufacturer. The entire
manual should be carefully read.

Table of Contents
Table of Contents
1.0 Quick Reference 3
2.0 Understanding Your Keypad 5
2.1 Panel and keypad models 5
3.0 The PowerSeries Pro Security System 6
3.1 General System Operation 6
3.2 Testing the System 6
3.3 Performing a Keypad and Siren test 7
3.4 Monitoring 7
4.0 Setting the Alarm System 8
4.1 Alarm System Arming/Setting Methods 8
4.2 Setting the System (Infinite Exit Delay) 8
4.3 Away Setting the System with the Keypad 8
4.3.1 Setting the system in Away mode 8
4.3.2 Canceling the setting sequence 9
4.4 Setting the system in Stay mode 9
4.5 Canceling the setting sequence 10
4.5.1 Silent Exit Delay 10
4.6 Exit Delay Time Restart 10
4.7 Alarm Cancel Window 10
4.8 Using 2-way Wireless Keys and Proximity Tags 10
4.9 Setting the System with a 2-Way Wireless Key 11
4.10 Setting the System with a Proximity Tag 11
5.0 Alarm System Unsetting Methods 12
5.1 Unsetting the System 12
5.2 Unsetting the system with a keypad 12
5.3 Unsetting the system with a 2-way Wireless Key 12
5.4 Engineer Reset function 12
5.5 Activating the DLS Window setting 12
6.0 Emergency Keys 14
7.0 Access Code Types 15
7.0 Opening the Access Codes menu 16
7.0 Adding, Changing and Deleting Access Codes 16
7.1 Adding or changing user access codes 16
7.2 Burglary Verification 16
7.3 Swinger Shutdown 17
7.4 Call Waiting 17
7.5 Fire Alarm Verification 17
7.6 System Lockout Due To Invalid Attempts 17
7.7 User Labels 17
8.0 Regular Maintenance and Troubleshooting 20
8.1 Cleaning 20
8.0 Troubleshooting 21
9.0 Access Codes 28
9.1 Sensor/Zone Information 29
10.0 Reference Sheets 30
10.1 System Information 30
10.2 Service Contact Information 30
11.0 UK Compliance Statement 31
12.0 EN Compliance 32
12.1 EUROPEAN CE COMPLIANCE STATEMENT 32
13.0 EULA 33
- 2 -

Chapter 1.0 Quick Reference
1.0 Quick Reference
The PowerSeries Pro Alarm System uses shortcut keys to access options or features on all
models of keypads. When using an LCD keypad, the PowerSeries Pro alarm system
additionally uses a menu based navigation system. Use the scroll keys to view the list of options
contained within the current menu.
For detailed information about the PowerSeries Pro alarm system, refer to the full online
manual, which can be accessed from the DSC website.
Status Lights
Function
Keys
Emergency
Keys
Ready - Indicates system normal. Must be on to set the system. All
zones must be secured or bypassed and the system unset for this light
to activate. Stay Set Fire Alarm
Set- Indicates the system is set. If the Ready light and the Set light are
both on, an Exit Delay is in progress.
Away Set Medical
Alarm
Trouble - On indicates a system malfunction or tamper. Flashing
indicates that the keypad has a low battery condition. Follow the
instructions displayed or enter [*][2] to view trouble. Correcting the
trouble turns off the indicator.
Chime
Panic Alarm
AC Power - Indicates AC Power is present. The AC Power light turns
off when AC is absent.
Reset
Quick Exit
Action Press
Setting and Unsetting
Away Set for 2 seconds + [Access Code†]
Stay Set for 2 seconds + [Access Code†]
Night Set When set in stay mode [*][1] + [Access Code†]
Unset [Access Code]
No-Entry Setting [*][9] + [Access Code†]
Quick Set/Quick Exit [*][0]
Cancel Setting Sequence [Access Code]
Bypassing - All bypass commands begin with [*][1] + [Access Code†]
Bypass Individual Zones [3 Digit Zone #]
Bypass All Open Zones [9][9][8]
Recall Last Bypass [9][9][9]
Clear Bypass
[0][0][0] OR [Scroll] Bypass Options + [*] + Clear Bypasses + [*]
Program Bypass Group
[3 digit zone #s] + [9][9][5] OR [3 digit zone #s] + Bypass Options
+ [*] + Prg Bypass Group + [*]
- 3 -

Chapter 1.0 Quick Reference
Action Press
Load Bypass Group
[9][9][1] OR Bypass Options + [*] + [Scroll] Bypass Group + [*]
Common Functions
Set Time and Date [*][6] [Master Code] + [0][1]
Turn Chime ON/OFF [*][4] + [Access Code†] OR
Change Brightness
[*][6] [Master Code] + [1][2] +
Change Contrast
[*][6] [Master Code] + [1][3] +
Buzzer Volume
[*][6] + [Master Code] + [1][4] +
Add/Delete User [*][5] + [Master Code] + [Access Code] + 1
Reset Smoke Detectors OR [*][7][2]
View Troubles
[*][2] + [Access Code†] +
View Alarms
[*][3] + [Access Code†] +
Perform System Test
[*][6] + [Master Code] + [0][4] +
† If configured by the installer.
- 4 -

Chapter 2.0 Understanding Your Keypad
2.0 Understanding Your Keypad
The PowerSeries Pro Alarm System supports a variety of wireless and hardwired keypads.
2.1 Panel and keypad models
This guide contains information for the following PowerSeries Pro panels:
•HS3032
•HS3228
•HS3248
These panels are compatible with the keypad models in the following table:
Table 1: Keypad models
Model Description
HS2LCDPRO Alphanumeric LCD keypad with proximity tag support
HS2LCDRFPRO8 Alphanumeric LCD keypad with wireless receiver and proximity tag
support
HS2LCDWFPRO8 Wireless alphanumeric LCD keypad with proximity tag support
HS2LCDWFVPRO8 Wireless alphanumeric LCD keypad with proximity tag support and
voice prompt
HS2TCHPRO Touch screen keypad with proximity support with a white enclosure
HS2TCHPROBLK Touch screen keypad with proximity support with a black enclosure
Note: This guide contains information for the HS2LCDPRO, HS2LCDRFPRO8, and the
HS2LCDWFVPRO8 keypad models. For information on the other keypad models, refer to the
PowerSeries Pro User Manual (29010102), and the PowerSeries Pro HS2TCHPRO /
HS2TCHPRO(BLK) User Manual (29010319).
- 5 -

Chapter 3.0 The PowerSeries Pro Security System
3.0 The PowerSeries Pro Security System
The PowerSeries Pro has been designed to provide the greatest possible flexibility and
convenience. Read this manual carefully and have the installer provide instructions on how to
operate the system and which features have been implemented. All users of this system
should be equally instructed in its use.
Fill out the "System Information" section with zone information and access codes and store this
manual in a safe place for future reference.
3.1 General System Operation
This security system is made up of a PowerSeries Pro control panel, one or more keypads and
various sensors and detectors. The metal cabinet contains the system electronics and standby
battery. The keypad is used to send commands to the system and to display the current
system status. The keypad(s) are mounted in a convenient location inside the protected
premises close to the entry/exit door(s). The security system has several zones of area
protection, each connected to one or more sensors (motion detectors, glassbreak detectors,
door contacts, etc.).
Note: Only the installer or service professional shall have access to the control panel.
3.2 Testing the System
Tests all system keypad LEDs, keypad sounders, bells and/or sirens. To ensure the system
continues to function as intended, test your system weekly.
IMPORTANT: Should the system fail to function properly contact the installation company.
IMPORTANT: All smoke detectors must be tested by the smoke detector installer once per
year.
- 6 -

Chapter 3.0 The PowerSeries Pro Security System
3.3 Performing a Keypad and Siren test
LCD Display
1. Press [*][6] and enter the [Master Code] to access User
Functions.
Press (*) for <>
User Functions
2. Press [04] or use the scroll keys to navigate to System Test and
press [*]. All keypad sounders, bells/sirens and keypad LEDs
activate for two seconds.
Press (*) for <>
System Test
3. Press [#] to return to the Ready state.
3.4 Monitoring
This system is capable of transmitting alarms, troubles and emergency information. If an alarm
is initiated by mistake, immediately call the central station to prevent an unnecessary response.
Note: The monitoring function must be enabled by the installer before it is operational.
Note: Consult with the installer to determine if the system is configured with a communicator
delay. A communicator delay will prevent a report to the central station if the control panel is
unset within 30-45 seconds after an intrusion alarm is triggered. Note that fire-type alarms are
normally reported without a delay.
Note: Ensure the installer verifies that the system is compatible with the Central Station
Receiver format at yearly intervals.
- 7 -

Chapter 4.0 Setting the Alarm System
4.0 Setting the Alarm System
4.1 Alarm System Arming/Setting Methods
The PowerSeries Pro system is capable of completing the full alarm system setting procedure
using one of the following methods:
•Push button switch mounted outside the supervised premises; or
•Protective switch (i.e., door contact) fitted to the final exit door of the alarmed premises or
area.
The setting procedure is a two-stage process that consists of initiating the alarm setting
procedure within the supervised premises (e.g., using a proximity tag or user code) followed
by completion of setting by one of the two methods mentioned above. Please check with the
installer which method has been enabled for your system.
4.2 Setting the System (Infinite Exit Delay)
In an attempt to reduce false alarms, your system is designed to send notification of an
improper exit when setting the system. When using the Push to Set, or Final Door Set feature,
attempting to set the system will start an infinite exit delay. The keypad will sound a beep once
per second. When you have opened and closed the final exit door, or after pressing the Push
to Set button, the exit delay will be reduced to the programmed value, which is typically 10
seconds, after which the alarm panel is set. When this time expires, the system checks for
detectors that may be open. If any of these are open, the panel will cancel the setting. If this
occurs, re-enter the premises, check the system, close any open windows or doors, and then
attempt to set again.
Note: This feature must be enabled by the installer.
4.3 Away Setting the System with the Keypad
Away mode activates the complete alarm system by:
•Setting all perimeter sensors.
•Setting all interior sensors.
4.3.1 Setting the system in Away mode
To set the system in Away mode, complete the following steps:
1. Ensure that you close all windows and doors.
2. Ensure that the Ready indicator is on.
Note: You cannot arm the system until the Ready indicator is on.
3. Choose one of the following options:
•To quickly set the system, press [*][0].
•To set the system using the Away key, press and hold the Away key for 2 seconds. If it is
necessary, enter an access code, or present a proximity tag to the keypad reader.
If the system bypasses a zone, a warning appears on the keypad.
- 8 -

Chapter 4.0 Setting the Alarm System
Note: For European installations (EN50131 certified), you can not set the system without a
valid user code. If you do not have a valid user code, do not attempt to initiate the setting
sequence for the alarm system.
After you initiate the setting sequence, the system completes the following actions:
•The Set indicator turns on.
•The Ready indicator remains lit.
•The Exit Delay time begins to count down.
•The keypad beeps six times, and continues to beep once each second. In the final 10
seconds, the system beeps rapidly.
Note: For European installations (EN50131 certified), the Armed indicator turns on only after
the Exit Delay.
When the Exit Delay timer expires, the system is set and the following actions occur:
•The Ready indicator turns off.
•The Set indicator remains on.
•The keypad stops sounding.
Note: The installer configures the Exit Delay timer in accordance with the North American,
Canadian, and European certification requirements (UL, ULC, and EN50131).
4.3.2 Canceling the setting sequence
To cancel the setting sequence, complete the following step:
•Enter your access code, or present a proximity tag to the keypad reader.
4.4 Setting the system in Stay mode
Stay mode partially activates the alarm system by Setting all perimeter sensors, and bypassing
all interior sensors.
Note: For European installations (EN50131 certified), the Keypad Blanking feature activates
after 30 seconds. You can see the status of the alarm system only after you enter a valid user
code.
To set the system in Stay mode, complete the following steps:
1. Ensure that you close all windows and doors.
2. Ensure that the Ready indicator is on.
3. Press and hold the Stay key for 2 seconds. If it is necessary, enter an access code, or
present a proximity tag to the keypad reader.
Note: Do not leave the premises.
If the system bypasses a zone, a warning appears on the keypad.
After you initiate the setting sequence, the system completes the following actions:
•The Armed indicator turns on.
•The Ready indicator remains lit.
•The Exit Delay timer begins counting down.
- 9 -

Chapter 4.0 Setting the Alarm System
Note: For European installations (EN50131 certified), the Armed indicator turns on only after
the Exit Delay.
When the Exit Delay timer expires, the system is set and the following actions occur:
•The Ready indicator remains lit.
•The Armed indicator remains on.
•The keypad stops sounding.
4.5 Canceling the setting sequence
To cancel the setting sequence, complete the following step:
•Enter your access code, or present a proximity tag to the keypad reader.
4.5.1 Silent Exit Delay
If you arm the system using the Stay key or the No Arming method [*] [9]:
•The warning beep is silenced
•The exit time doubles only for that exit period (CP-01 versions only).
Note: For non CP-01 versions, Standard Exit Time is used.
4.6 Exit Delay Time Restart
The control panel provides an option where, if a entry/exit zone is tripped a second time prior
to the end of the exit delay, the exit delay time restarts. The exit delay timer can only be
restarted once.
Note: Infinite Exit Delay is also available, so that the installer does not need to program the
timer. Rather, the installer will enable operation, based on British Standards (BS8243).
4.7 Alarm Cancel Window
The control panel provides a period of time in which the user can cancel the alarm
transmission (minimum duration is 5 minutes). If the programmed alarm transmission delay
has expired, canceling an alarm sends a message to the monitoring station. Upon a successful
transmission of the cancellation message, the keypad beeps 6 times. Must be enabled and
configured by the installer.
4.8 Using 2-way Wireless Keys and Proximity Tags
The 2-way wireless key allows users the ability to readily set/unset their system, and to call for
help. For information on enrolling wireless keys see "User Labels".
6
7
1
2
3
4
5
5
2
3
4
16
- 10 -

Chapter 4.0 Setting the Alarm System
1. Away Set
2. Stay Set
3. Unset
4. Panic
5. Command Output 1
6. Message LED
7. Status LEDs
1. Away Set
2. Stay Set
3. Unset
4. Panic
5. Command Output 1
6. LED
Note: The Panic feature has not been evaluated by UL. All wireless key buttons are
programmable. Verify the functions assigned to each key with your installer. When using
compatible wireless keys there is one bell squawk for setting and two bell squawks for
unsetting.
4.9 Setting the System with a 2-Way Wireless Key
If configured, the PowerSeries Pro system can be set using the wireless keys provided with
your alarm system. To Set the system with a 2-way wireless key, press the desired Setting
mode button when the system Ready indicator is on.
4.10 Setting the System with a Proximity Tag
Proximity tags can be used to set/unset the system or to perform a programmed function (e.g.
used in place of entering an access code or to unlock a storage room door).
To Set the system with a proximity tag
•Present your proximity tag to a keypad with a proximity sensor when the system Ready
indicator is on.
•If configured by your installer, enter your access code.
Note: When arming with a proximity tag, the system sets in Away mode if you exit the
premises. The system arms in Stay mode if a motion sensor is installed and you don't exit the
premises.
- 11 -

Chapter 5.0 Alarm System Unsetting Methods
5.0 Alarm System Unsetting Methods
The PowerSeries Pro system is capable of supporting the following alarm system unsetting
methods in accordance with BS8243-2010+A1:2014
•Prevention of entry to the supervised premises before the partition is unset.
•Unset by using the wireless key before entering the supervised premises causes or permits
the initial entry door to be unlocked.
•Unset by using the Mini Proximity tag in conjunction with one of the keypad HS2LCDPRO or
HS2LCDRFPRO8 entering the supervised premises and within the programmed entry
delay.
5.1 Unsetting the System
Depending on your system configuration, there are multiple methods you can use to unset
your system. You can unset the system using a keypad, 2-way wireless key or a proximity tag:
5.2 Unsetting the system with a keypad
Note: When you enter the premises, the keypad sounds. To avoid an alarm condition, you
must unset the system within a specific number of seconds.
To unset the system with a keypad, complete the following step:
•Enter your access code, or present a proximity tag to the keypad reader.
5.3 Unsetting the system with a 2-way Wireless Key
Note: When you enter the premises, the keypad sounds. To avoid an alarm condition, you
must unset the system within a specific number of seconds.
To unset the system with a 2-way Wireless Key, complete the following step:
•When the system is set, and the Armed indicator is on, press the Unset key.
Note: The installer programs the Duration of Entry timer, and advises on the duration of the
timer. Valid entries are between 30 seconds and 4 minutes).
5.4 Engineer Reset function
The Engineer Reset function can be set to ensure that an engineer inspects the alarm system
location before the system can be reset. The installer can activate this function when they
install the system. If this function is active when an alarm occurs, you cannot set the system.
You must contact the installer.
5.5 Activating the DLS Window setting
You can use the system keypad to activate the DLS Window setting. If you activate the DLS
Window setting, an installer can download DLS software to program and control supported
security systems.
Note: Activate the DLS Window setting only when an installer instructs you to.
To activate the DLS Window setting, complete the following steps:
1. On the keypad, press [*] [6] and enter the master code.
2. Press [05].
- 12 -

Chapter 5.0 Alarm System Unsetting Methods
The DLS window remains active for 30 mintues or 6 hours depending on the system's
programming.
- 13 -

Chapter 6.0 Emergency Keys
6.0 Emergency Keys
IMPORTANT: EMERGENCY USE ONLY!
Pressing both the emergency keys generates a Fire, Medical, or Panic Alarm, and alerts the
monitoring station. To generate a medical alarm, press both medical alarm keys
simultaneously for 2 seconds. The keypad beeps to indicate the alarm input has been
accepted and sent to the monitoring station.
Fire Alarm
Medical Alarm
Panic Alarm
Verify with your alarm company that your system is equipped with emergency keys.
Having an optional audio verification module installed on your system allows the monitoring
station to open 2-way communication when notified of an alarm.
Note: Fire keys can be disabled by the installer.
- 14 -

Chapter 7.0 Access Code Types
7.0 Access Code Types
The alarm system provides the following user access code types:
Code Add User Delete User Set Unset Access
Codes
User
Functions
Installer
Master All All Yes Yes Yes Yes No
User No No Yes Yes No No No
Supervisor All but
Master
All but
Master
Yes Yes Yes Yes No
Duress No No Yes Yes No No No
One-time
user
No No Yes 1/day No No No
Installer and Master codes are system codes that can be changed but not deleted. The other
codes are user-defined and can be added or deleted as necessary. By default, access codes
have the same partition and attribute programming as the code used to program them.
Note: When using 8-digit access codes, the minimum number of variations are:
•138888 for HS3032
•100000 for HS3128
•100000 for HS3248
There are no disallowed codes.
Master
Code
By default, the master code can access all partitions and can perform any keypad
function. This code can be used to program all access codes, including the
supervisor and duress codes. The master code number is [01].
User
Codes
This type of access code is used to set and unset assigned partitions and can
access the User Functions menu.
Supervisor
Codes
Use when you want to allow additional users to manage access codes [*5] or User
Functions [*6]. Supervisor codes created by the master code have the same
attributes as the master code. Supervisor codes created by another supervisor
code have the same attributes, except the supervisor attribute. After creation,
attributes can be changed for all supervisor codes. For information on how to
program a supervisor code see "Configuring additional User Options".
Duress
Codes
A Duress Code is used if forced to access your keypad under threat. Duress codes
function the same as user access codes, except they transmit a Duress Report to
your monitoring station when used to perform any function on the system.
Duress codes cannot be used to change Access Codes [*5], User Functions [*6] or
Installer [*8] programming. For information on how to program a Duress Code,
see "Configuring additional User Options".
One Time
User Code
Used to grant someone one-time access to your home, i.e., a cleaning person or
contractor. The ability to unset the system is reset at midnight or when the one-
time user code is keyed in by the master code user. For information on how to
program a One Time User Code, see "Configuring Additional User Options".
- 15 -

Chapter 7.0 Opening the Access Codes menu
7.0 Opening the Access Codes menu
LCD Display
1. Press [*][5]
OR
press [*] and use the scroll keys to navigate to Access
Codes and press [*] to select.
Press (*) for <>
Access Codes
2. Enter Master or Supervisor code.
3. Enter User #
or
scroll through the list of users and press [*].
Press (*) for <>
{User Label}
4. To go back to the Ready state press [#].
7.0 Adding, Changing and Deleting Access Codes
Each configured user is assigned a number as follows:
•01-72 for HS3032
•01-1000 for HS3128
•01-1000 for HS3248
A “-” beside a user ID indicates it is not programmed.
7.1 Adding or changing user access codes
To add or change user access codes, complete the following steps:
LCD Display
1. Enter the user number and press [*]. Press (*) for < >
Access Code
2. Enter a new 4, 6, or 8-digit access code. After entering a new
code, the display indication is changed to “P” from “-”. If a
duplicate code is entered, an error tone sounds. After the code is
programmed, the keypad returns to the previous menu.
Enter New Code
AAAA
To Delete a User Access Code LCD Display
3. Enter the user number and press [*]. Press (*) for <>
Access Code
4. Press [*]. The code is deleted and the flag is changed to “-”
from “P”. After the code is programmed, the keypad returns to
the previous menu.
Enter New Code
030516
Note: Any proximity tags associated with deleted user codes must be re-enrolled.
7.2 Burglary Verification
The PowerSeries Pro system includes sequential detection features that require an activation
on two or more zones, within a given time period, to generate a confirmed alarm and
- 16 -

Chapter 7.0 Adding, Changing and Deleting Access Codes
immediate police response.
Note: This feature must be enabled and configured by your installer.
7.3 Swinger Shutdown
The Control Panel has a swinger shutdown feature that, when enabled, causes a
programmable number of trips to shut down the zone.
Note: This feature must be enabled and configured by the installer.
7.4 Call Waiting
The PowerSeries Pro system includes a programmable option for call waiting to prevent a call
waiting line from interfering with the alarm verification process. This option is disabled by
default.
Note: This feature must be enabled and configured by your installer.
7.5 Fire Alarm Verification
Fire Alarm Verification is an available option for Fire zones. If configured, and the conditions
for alarm verification are met, the fire alarm sounds and an alarm transmission is sent to the
monitoring station.
Note: This feature must be enabled and configured by your installer.
7.6 System Lockout Due To Invalid Attempts
If too many invalid access codes are entered, your system can be configured to automatically
lockout input from all keypads, wireless keys and proximity tags for a programmed duration. If
this happens, wait the programmed duration then try again.
When the system is locked out the following message is displayed.
LCD Display
Keypad Lockout
Note: This feature and lockout duration must be configured by your installer. Fire, Medical
and Panic keys are still active during a System Lockout.
7.7 User Labels
Adding or editing labels is done by using a pre-programmed word library. The word library lists
the full library and the associated three-digit code.
To Edit a User Label using the Word Library LCD Display
1. From the applicable user, press [3] or use the scroll keys to
scroll to User Labels and press [*].
Press (*) for <>
User Labels
2. Press [*] [*] to enter the word library. Program Name
{User 1 Label 1}
3. Use the scroll keys to view the list of words or enter the 3-digit
number to display the desired word. Press [*] to select the word.
4. To enter an additional word, repeat step 3.
Press (*) for
{User Label}
- 17 -

Chapter 7.0 Adding, Changing and Deleting Access Codes
Word Library
00-
1
Aborted 04-
1
Communicato-
r
08-
1
Front 12-
1
Memory 16-
1
Screen 20-
1
7
00-
2
AC 04-
2
Computer 08-
2
Furnace 12-
2
Menu 16-
2
Second 20-
2
8
00-
3
Access 04-
3
Control 08-
3
Gallery 12-
3
Monoxid-
e
16-
3
Sensor 20-
3
9
00-
4
Active 04-
4
Date 08-
4
Garage 12-
4
Mother’s 16-
4
Service 20-
4
A
00-
5
Activity 04-
5
Daughter’s 08-
5
Gas 12-
5
Motion 16-
5
Shed 20-
5
B
00-
6
Alarm 04-
6
Degrees 08-
6
Glass 12-
6
No 16-
6
Shock 20-
6
C
00-
7
All 04-
7
Delay 08-
7
Goodbye 12-
7
North 16-
7
Shop 20-
7
D
00-
8
AM 04-
8
Den 08-
8
Gym 12-
8
Not 16-
8
Side 20-
8
E
00-
9
Area 04-
9
Desk 08-
9
Hallway 12-
9
Now 16-
9
Siren 20-
9
F
01-
0
Arm 05-
0
Detector 09-
0
Heat 13-
0
Number 17-
0
Sliding 21-
0
G
01-
1
Armed 05-
1
Dining 09-
1
Hello 13-
1
Off 17-
1
Smoke 21-
1
H
01-
2
Arming 05-
2
Disarmed 09-
2
Help 13-
2
Office 17-
2
Son’s 21-
2
I
01-
3
Attic 05-
3
Door 09-
3
High 13-
3
OK 17-
3
Sound 21-
3
J
01-
4
Auxiliary 05-
4
Down 09-
4
Home 13-
4
On 17-
4
South 21-
4
K
01-
5
Away 05-
5
Download 09-
5
House 13-
5
Open 17-
5
Special 21-
5
L
01-
6
Baby 05-
6
Downstairs 09-
6
In 13-
6
Opening 17-
6
Stairs 21-
6
M
01-
7
Back 05-
7
Drawer 09-
7
Install 13-
7
Panic 17-
7
Stay 21-
7
N
01-
8
Bar 05-
8
Driveway 09-
8
Interior 13-
8
Partition 17-
8
Sun 21-
8
O
01-
9
Basement 05-
9
Duct 09-
9
Intrusion 13-
9
Patio 17-
9
Supervisory 21-
9
P
02-
0
Bathroom 06-
0
Duress 10-
0
Invalid 14-
0
Pet 18-
0
System 22-
0
Q
02-
1
Battery 06-
1
East 10-
1
Is 14-
1
Phone 18-
1
Tamper 22-
1
R
02-
2
Bedroom 06-
2
Energy 10-
2
Key 14-
2
Please 18-
2
Temperatur-
e
22-
2
S
02-
3
Bonus 06-
3
Enter 10-
3
Kids 14-
3
PM 18-
3
Test 22-
3
T
02-
4
Bottom 06-
4
Entry 10-
4
Kitchen 14-
4
Police 18-
4
Time 22-
4
U
02-
5
Breezewa-
y
06-
5
Error 10-
5
Latchke-
y
14-
5
Pool 18-
5
To 22-
5
V
02-
6
Building 06-
6
Exercise 10-
6
Laundry 14-
6
Porch 18-
6
Touchpad 22-
6
W
- 18 -

Chapter 7.0 Adding, Changing and Deleting Access Codes
Word Library
02-
7
Bus 06-
7
Exit 10-
7
Left 14-
7
Power 18-
7
Trouble 22-
7
X
02-
8
Bypass 06-
8
Exterior 10-
8
Level 14-
8
Press 18-
8
Unbypass 22-
8
Y
02-
9
Bypassed 06-
9
Factory 10-
9
Library 14-
9
Program 18-
9
Unit 22-
9
Z
03-
0
Cabinet 07-
0
Failure 11-
0
Light 15-
0
Progress 19-
0
Up 23-
0
(Spac-
e)
03-
1
Camera 07-
1
Family 11-
1
Lights 15-
1
Quiet 19-
1
West 23-
1
‘
03-
2
Cancelled 07-
2
Father’s 11-
2
Living 15-
2
Rear 19-
2
Window 23-
2
-
03-
3
Car 07-
3
Feature 11-
3
Load 15-
3
Receiver 19-
3
Zone 23-
3
_
03-
4
Carbon 07-
4
Fence 11-
4
Loading 15-
4
Report 19-
4
0 23-
4
*
03-
5
Central 07-
5
Fire 11-
5
Low 15-
5
RF 19-
5
1 23-
5
#
03-
6
Chime 07-
6
First 11-
6
Lower 15-
6
Right 19-
6
2 23-
6
:
03-
7
Closed 07-
7
Floor 11-
7
Main 15-
7
Room 19-
7
3 23-
7
/
03-
8
Closet 07-
8
Force 11-
8
Master 15-
8
Safe 19-
8
4 23-
8
?
03-
9
Closing 07-
9
Foyer 11-
9
Mat 15-
9
Saver 19-
9
5 23-
9
04-
0
Code 08-
0
Freeze 12-
0
Medical 16-
0
Schedule 20-
0
6 24-
0
- 19 -

Chapter 8.0 Regular Maintenance and Troubleshooting
8.0 Regular Maintenance and Troubleshooting
Keep your Alarm Controller in optimal condition by following all the instructions that are
included within this manual and/or marked on the product. It is the end-user and/or installer’s
responsibility to ensure that the disposal of the used batteries is made according to the waste
recovery and recycling regulations applicable to the intended market.
8.1 Cleaning
•Clean the units by wiping with a damp cloth only.
•Do not use abrasives, thinners, solvents or aerosol cleaners (spray polish) that may enter
through holes in the Alarm Controller and cause damage and/or create hazards.
•Do not use any water or any other liquid.
•Do not wipe the front cover with alcohol.
- 20 -