JUKI DDL-5600N Series User manual

DDL-5600NJ-7-0B / CP-180A
Widely applicable to the sewing of heavy-weight materials
The machine for heavy-weight materials (L-Type) has
the maximum stitch length as long as 8mm, thereby
making the machine widely applicable to the sewing
of such as bags, etc. requiring a longer stitch length.
The machine for jeans (J-Type) has achieved the
maximum sewing speed as high as 4,000sti/min,
which increases the productivity.
Standard with attachment
mounting seats.
Higher lift of the presser foot The double-capacity hook is
provided as standard
The machine is provided as standard with
extra attachment mounting seats for
attachment of new auxiliary parts in the
future. The extremely high durability of the
seats ensures an extended service with
frequent replacement of attachments.
The lift of the presser foot is as high as 13mm
when using the knee lifter, thereby allowing
the operator to handle the material on the
machine with ease, even when using heavy
materials.
The machine comes with a horizontal-axis
double-capacity hook, not only to decrease
the frequency of bobbin thread changing, but
also to enable sewing work with increased
efficiency.
DDL-5600N Series
1-needle, Lockstitch Machine with Double-capacity Hook
The machine provided with a double-capacity hook best-suited
for the sewing of heavy-weight materials and jeans, upgrades the quality
of finished products and promotes efficiency in production.
Reliable performance,
highly consistent seam quality
Max. 13mm
Max. 13mm
Bobbin for
Bobbin for
double-capacity hook
double-capacity hook
Bobbin for
Bobbin for
standard hook
standard hook
Max. 13mm
Bobbin for
double-capacity hook
Bobbin for
standard hook

Thanks to the reliable thread trimming
mechanism which comes with a moving
knife and a counter knife, the machine
quickly and surely trims a thread from a
thin one up to a thread as thick as the
count #8.
DDL-5600N-7
DDL-5600NJ-7-0B / CP-180A
SPECIFICATIONS
WHEN YOU PLACE ORDERS
DDL-5600NJ DDL-5600NL DDL-5600NJ-7 DDL-5600NL-7 DDL-5600NU-7
Model name
Reliable thread trimmer to surely cut a thread
as thick as the count #8
(1-needle, Lockstitch Machine with Double-capacity Hook with automatic thread trimmer )
Juki Corporation operates an environmental management system
to promote and conduct the following as the company engages in
the research, development, design, sales, distribution,and
maintenance of industrial sewing machines, household sewing
machines, industrial robots, etc., and in the provision of sales and
maintenance services for data entry systems:
(1) The development of products and engineering processes
that are safe to the environment
(2) Green procurement and green purchasing
(3)
Energy conservation (reduction in carbon-dioxide emissions)
(4) Resource saving (reduction of papers purchased, etc.)
(5) Reduction and recycling of waste
(6) Improvement of logistics efficiency (modal shift and
improvement of packaging, packing, etc.)
SEWING MACHINERY BUSINESS UNIT
FEBRUARY, 2014 Printed in Japan(C)
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO 206-8551, JAPAN
PHONE : [phone]
FAX : [phone]
http://www.juki.com
Specifications and appearance are subject to change without prior notice for improvement.
Read the instruction manual before putting the machine into service to ensure safety.
This catalogue prints with environment-friendly soyink on recycle paper.
Please note when placing orders, that the model name should be written as follows:
✽"sti/min" stands for "Stitches per Minute."
To order, please contact your nearest JUKI distributor.
DDL5600N DDL5600N 7
M92
CodeApplication
J
For jeans
L
For heavy-weight materials
U
For leather shoes
Code
Wiper and automatic reverse feed function
Wiper Automatic reverse feed function
0B
Provided
FB
Provided
Not provided
Provided
(For DDL-5600NJ-7)
Motor for SC CP18A
CP180A
Panel
SC920C
Code
S
Power supply
Single-phase 100~120V
Single-phase 200~240V (For General Export)
Single-phase 200~240V (For CE)
D3-phase 200~240V
K
N
Control box
Application For jeans For heavy-weight
materials For leather shoes
For heavy-weight
materials
For jeans
Max. sewing speed 4,000sti/min 4,000sti/min3,000sti/min 3,000sti/min
5mm
(normal/reverse feed) 5mm (normal/reverse feed)
8mm
(normal/reverse feed) 8mm, 5mm (reverse feed)
Max. stitch length
36mm
By hand: 5.5mm, By knee: 13mm
DB×1 (#21) #20~#23 For JE: 134 (Nm130)
#30~#8, B46~B92, Nm=60/3~30/3
Horizontal-axis double-capacity hook
Automatic
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Needle bar stroke
Lift of the presser foot
Needle (at the time of delivery)
Thread
Hook
Lubrication
Lubricating oil
Provided as standard
Single-phase 100~120V, 200~240V, 3-phase 200~240V
650VA
30kg
—
—
—
28kg
Automatic reverse feed function
Power requirement
Power consumption
Weight of the machine head
CodeAuto-lifter (optional)
Not provided
AK85
Provided (AK)