Jura IMPRESSA A5 One Touch User manual

pt
es
nl
it
fr
ru
en
de
Instructions for use for IMPRESSA A5 One Touch
The Instructions for Use has been awarded the seal of
approval by the independent German Technical
Inspection Agency, TÜV SÜD, due to its easy-to-
understand style, its thoroughness and coverage of
safety aspects.

32
Table of contents
Your IMPRESSA A5 One Touch
Control elements 34
Important information 36
Proper use...............................................................................................................................................................36
For your safety .......................................................................................................................................................36
1 Preparing and using for the first time 38
JURA on the Internet .............................................................................................................................................38
3-colour plain text display....................................................................................................................................38
Setting up the machine........................................................................................................................................38
Filling the bean container ....................................................................................................................................38
First-time use..........................................................................................................................................................39
First-time use with filter cartridge activation...................................................................................................39
First-time use without filter cartridge activation............................................................................................ 40
Determining the water hardness....................................................................................................................... 40
Filling the water tank ............................................................................................................................................ 41
2 Preparation 41
Espresso, coffee...................................................................................................................................................... 41
Preparing two speciality coffees at the touch of a button............................................................................. 41
Latte macchiato, cappuccino...............................................................................................................................42
Permanently setting the amount of water for the cup size...........................................................................42
Ground coffee.........................................................................................................................................................43
Adjusting the grinder............................................................................................................................................43
Hot water................................................................................................................................................................ 44
3 Daily operation 44
Switching on the machine .................................................................................................................................. 44
Daily maintenance................................................................................................................................................ 44
Switching off the machine.................................................................................................................................. 44
4 Permanent settings in programming mode 45
Products ................................................................................................................................................................. 45
Setting the water hardness................................................................................................................................. 45
Energy-saving mode............................................................................................................................................ 46
Automatic switch-off............................................................................................................................................ 46
Rinses.......................................................................................................................................................................47
Unit for amount of water .....................................................................................................................................47
Language................................................................................................................................................................ 48
5 Maintenance 48
Rinsing the machine ............................................................................................................................................ 48
Rinsing the milk system...................................................................................................................................... 48
Cleaning the milk system.................................................................................................................................... 49
Dismantling and rinsing the dual spout........................................................................................................... 49
Inserting and activating the filter...................................................................................................................... 50
Changing the filter................................................................................................................................................. 51

33
pt
es
nl
it
fr
ru
en
de
Table of contents
Symbol description
Warnings
J WARNING
J CAUTION
Always take note of any information marked with the words CAUTION or WARNING
and a warning sign. The signal word WARNING draws your attention to potential
serious injury, and the signal word CAUTION to potential minor injury.
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
TPrompt to take action. This symbol means that you are being prompted to perform
some action.
EInformation and tips to make it even easier to use your IMPRESSA.
ESPRESSO Display
Cleaning the machine...........................................................................................................................................52
Descaling the machine ........................................................................................................................................52
Descaling the water tank......................................................................................................................................53
Cleaning the bean container ...............................................................................................................................53
6 Display messages 54
7 Troubleshooting 55
8 Transport and environmentally friendly disposal 56
Transport/ Emptying the system...................................................................................................................... 56
Disposal.................................................................................................................................................................. 56
9 Technical data 56
10 Index 57
11 JURA contact details/ Legal information 59

34
Control elements
Control elements
2
3
5
4
6
7
1
9
8
1 Water tank
2 Mains cable (back of the machine)
3 Milk pipe
4 Coffee grounds container
5 Drip tray
6 Bean container with aroma preservation cover
7 Hot-water spout
8 Height-adjustable dual spout
9 Cup grille

35
Control elements
pt
es
nl
it
fr
ru
en
de
8
10
12
3
4
1
2
5
6
7
9
11
14
13
1 Cover for powder chute for ground coffee
2 Powder chute for ground coffee
3 Display
4 cMaintenance button
5 /Cappuccino button
6 (Latte Macchiato button
7 Rotary Switch status display
8 Cover cap for grinder adjustment switch
9 Grinder adjustment switch
10 gRotary Switch
11 mHot Water button
12 <Espresso button
13 QOn/Off button
14 >Coffee button

36
Important information
Important information
Proper use
The machine is designed and
intended for private domestic use. It
should only be used for coffee
preparation and to heat milk and
water. Use for any other purpose
will be deemed improper. JURA
Elektroapparate AG cannot accept
any responsibility for the conse-
quences of improper use.
Before using the machine read
these instructions for use thor-
oughly and completely and comply
with the instructions they contain.
A warranty service is not applicable
for damage or defects caused by
non-compliance with the instruc-
tions for use. Keep these instruc-
tions for use close to the machine
and pass them on to the next user.
For your safety
Please carefully read and observe
the important safety information
set out below.
To avoid danger of potentially fatal
electric shock:
UNever use a machine which is
damaged or has a defective
mains cable.
UIn the event of signs of damage,
for example if there is a smell of
burning, unplug the machine
immediately from the mains
supply and contact JURA service.
UIf the mains cable of this
machine is damaged, it must be
repaired either directly by JURA
or by an authorised JURA service
centre.
UMake sure that the IMPRESSA
and the mains cable are not
located close to hot surfaces.
UBe careful to ensure that the
mains cable is not trapped and
does not rub against sharp
edges.
UNever open and repair the
machine yourself. Do not modify
the machine in any way that is
not described in these instruc-
tions for use. The machine
contains live parts. If opened,
there is a danger of potentially
fatal injury. Repairs may only be
carried out by authorised JURA
service centres, using original
spare parts and accessories.
A defective machine is not safe and
could cause injury or fire. To avoid
damage and any associated risk of
injury or fire:
UNever allow the mains cable to
loosely hang down. The mains

37
Important information
pt
es
nl
it
fr
ru
en
de
cable could pose a tripping
hazard or become damaged.
UProtect the IMPRESSA from
environmental influences such as
rain, frost and direct sunlight.
UDo not immerse the IMPRESSA,
mains cable or connections in
water.
UDo not put the IMPRESSA or any
individual parts in the dish-
washer.
UBefore cleaning, switch your
IMPRESSA off with the On/Off
button. Always wipe the
IMPRESSA with a damp cloth
rather than a wet one, and
protect it from prolonged expo-
sure to water splash.
UOnly connect the machine to the
mains voltage in accordance
with the information on the
rating plate. The rating plate is
located on the underside of your
IMPRESSA. Further technical data
is provided in these instructions
for use (see Chapter 9 ‘Technical
data’).
UConnect the IMPRESSA directly
to a domestic power socket.
Using multi-socket adapters or
extension cords may cause
overheating.
UPlease only use original JURA
maintenance products. Use of
products that are not explicitly
recommended by JURA could
damage the IMPRESSA.
UDo not use any coffee beans
treated with additives or cara-
melised coffee beans.
UOnly fill the water tank with
fresh, cold water.
UDo not fill the bean container
with water.
USwitch the machine off with the
On/Off button if you are going to
be absent for a longer period of
time and remove the mains plug
from the power socket.
UChildren may not clean or ser-
vice the machine unless super-
vised by a responsible person.
UDo not allow children to play
with the machine.
UKeep children under the age of 8
away from the machine, or
supervise them constantly.
UChildren aged 8 and over may
only operate the machine with-
out supervision if they have been
instructed in how to use it safely.
Children must be able to recog-
nise and understand the poten-
tial dangers arising from incor-
rect use.

38
1 Preparing and using for the first time
People, including children, who
Udo not have the physical, sen-
sory or mental capabilities to use
the machine safely or
Uare inexperienced or lack knowl-
edge in how to use the machine
safely
must be supervised by a responsi-
ble person when using it, or must
be instructed in how to use it
correctly.
Safety when handling the CLARIS
Blue filter cartridge:
UFilter cartridges should be kept
out of the reach of children.
UStore filter cartridges in a dry
place in the sealed packaging.
UProtect cartridges from heat and
direct sunlight.
UDo not use damaged filter
cartridges.
UDo not open filter cartridges.
1 Preparing and using for the
first time
This chapter provides you with the information
you need to use your IMPRESSA without any
problems. You will prepare your IMPRESSA
step-by-step to enjoy your first perfect cup of
coffee.
JURA on the Internet
Visit us on the Internet.
On the JURA website (www.jura.com) you will find
interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
3-colour plain text display
Your IMPRESSA features a 3-colour plain text
display. The colours of the display texts have the
following meanings:
UGreen: The IMPRESSA is ready for use.
URed: The IMPRESSA is prompting you to
perform some action.
UYellow: You are in programming mode.
Setting up the machine
When setting up your IMPRESSA, please note the
following:
UPlace the machine on a horizontal surface that
is not sensitive to water.
UChoose a spot for your IMPRESSA which
protects the machine against overheating.
Ensure that the ventilation slots are not
covered.
Filling the bean container
CAUTION
Coffee beans which have been treated with
additives (e.g. sugar), ground coffee or freeze-dried
coffee will damage the grinder.
T Only use untreated coffee beans to fill the
bean container.

39
1 Preparing and using for the first time
pt
es
nl
it
fr
ru
en
de
TRemove the aroma preservation cover of the
bean container.
TRemove any dirt or foreign objects from
inside the bean container.
TFill the bean container with coffee beans.
TClose the bean container.
First-time use
When using the machine for the first time, you can
choose whether you want to operate IMPRESSA
with or without the CLARIS Blue filter cartridge. If
the water hardness is 10°dH or more, we recom-
mend using the filter cartridge. If you do not know
the hardness of your water, you can find this out
first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
EThe On/Off button also acts as a power
switch. When the IMPRESSA is switched off,
the machine does not consume standby
energy.
J WARNING
If the machine is operated with a defective mains
cable, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged or
has a defective mains cable.
Precondition:Bean container is filled.
TInsert the mains plug into a power socket.
Q T Press the On/Off button to switch the
machine on.
SPRACHE DEUTSCH
g T Turn the Rotary Switch until the required
language is displayed, for example
LANGUAGE ENGLISH.
k T Press the Rotary Switch to confirm the
language setting.
OK, the language is set.
FILTERp/ YESp
ENow decide whether you want to operate
your IMPRESSA with or without a CLARIS
Blue filter cartridge.
First-time use with filter cartridge
activation
k T Press the Rotary Switch.
OK
INSERT FILTER
TRemove the water tank.
TOpen the filter holder.
TInsert the filter cartridge into the water tank,
exerting slight pressure.
TClose the filter holder. It will click into place
audibly.
EAfter two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
TFill the water tank with fresh, cold water and
reinsert it.
TPlace a receptacle (at least 500ml) under the
hot-water and dual spout.

40
1 Preparing and using for the first time
k T Press the Rotary Switch.
FILTER RINSING, water flows out of
the hot-water spout.
EYou can interrupt rinsing of the filter at any
time by pressing any button. Press the
Maintenance buttonc, to continue with
rinsing of the filter.
EThe water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
SYSTEM FILLING, water flows out of
the dual spout.
HEATING
RINSING, the system rinses itself. The
operation stops automatically.
READY
First-time use without filter cartridge
activation
g T Turn the Rotary Switch until FILTER-/
NO- is displayed.
k T Press the Rotary Switch.
OK
16°dH
g T Turn the Rotary Switch to change the water
hardness setting, e.g. to 25°dH.
k T Press the Rotary Switch.
OK
FILL WATER TANK
TRemove the water tank.
TFill the water tank with fresh, cold water and
reinsert it.
PRESS RINSE
TPlace a receptacle under the hot- water
spout and the dual spout.
c T Press the Maintenance button.
SYSTEM FILLING, the system fills up
with water.
HEATING
RINSING, the system rinses itself. The
operation stops automatically.
READY
Determining the water hardness
You can find out what the water hardness is by
using the Aquadur® test strip supplied as standard.
THold the test strip briefly (for one second)
under running water.
TShake off the water.
TWait for about one minute.
TYou will then be able to read the degree of
water hardness from the discolouration of
the Aquadur® test strip and the description
on the packaging.
The water hardness can now be set.

41
2 Preparation
pt
es
nl
it
fr
ru
en
de
Filling the water tank
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
CAUTION
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
TRemove the water tank and rinse with cold
water.
TFill the water tank with fresh, cold water and
reinsert it.
2 Preparation
EYou can interrupt preparation at any time
while a speciality coffee, speciality coffee
with milk or hot water is being prepared. Just
press any button.
EBefore and during the grinding operation
you can select the coffee strength of
espresso <, coffee >, cappuccino /and
latte macchiato (: NORMAL, STRONG.
EDuring preparation, you can change the
preset amounts (e.g. amount of milk foam
or water) by turning the Rotary Switch g.
EYou can follow the current status of
preparation on the progress bar.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Products’).
Espresso, coffee
Preparation of espresso <and coffee >follows
this model.
Example:Proceed as follows to prepare one coffee.
Precondition:READY is displayed.
TPlace a cup under the dual spout.
> T Press the Coffee button to start preparation.
COFFEE, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
Preparing two speciality coffees at the
touch of a button
The preparation of 2espressi and 2coffees follows
this same model.
Example:Prepare two espressi.
Precondition:READY is displayed.
TPlace two espresso cups under the dual
spout.
< T Press the Espresso button twice (within two
seconds) to start preparation.
2 ESPRESSI, the preset amount of
water flows into the cups.
EPlease note that the desired speciality coffee
is prepared twice in succession.
Preparation stops automatically.
READY

42
2 Preparation
Latte macchiato, cappuccino
Your IMPRESSA can prepare a latte macchiato or
cappuccino at the touch of a button. There is no
need to move the glass or cup.
Latte macchiato (and cappuccino /are pre-
pared following this model.
Example:Proceed as follows to prepare one latte
macchiato.
Precondition:READY is displayed.
TPlace a glass under the dual spout.
TRemove the protective cover of the dual
spout.
TConnect the milk pipe to the dual spout.
TImmerse the other end of the milk pipe in a
receptacle with milk (figure: optional
stainless steel vacuum milk container, 0.4
litres, from JURA).
EEnsure that the filling height of the milk is
no higher than the milk pipe connection on
the dual spout.
( T Press the Latte Macchiato button.
LATTE MAC., the milk foam is prepared.
Preparation stops automatically when the
preset amount of milk is reached.
PAUSE
EThere is a short interval while the hot milk
separates from the milk foam. This allows
the typical layers of a latte macchiato to
form. You can choose the length of this
interval in programming mode (see
Chapter4 ‘Permanent settings in program-
ming mode – Products’).
LATTE MAC., coffee preparation starts.
The preset amount of water flows into the
glass.
Preparation stops automatically.
READY
To ensure that the milk system in the dual spout
always works properly, you must clean it daily (see
Chapter 5 ‘Maintenance – Cleaning the milk
system’).
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all speciality coffees and hot
water according to the cup size. Adjust the amount
once as shown in the following example. Every
time you prepare a drink in the future, this amount
of water will be dispensed.
Example:Permanently adjust the amount of
cappuccino to the cup size.
Precondition:READY is displayed. Milk is
connected to the dual spout.
TPlace a cup under the dual spout.
/T Press and hold the Cappuccino button until
ENOUGH MILK? appears.
/T Release the Cappuccino button.
The milk foam is prepared.
TPress any button as soon as there is
sufficient milk foam in the cup.
OK
ENOUGH COFFEE?, the coffee flows
into the cup.

43
2 Preparation
pt
es
nl
it
fr
ru
en
de
TPress any button as soon as there is
sufficient coffee in the cup.
OK, CAPPUCCINO, the set amounts for
one cappuccino are permanently stored.
READY
EYou can alter this setting at any time by
repeating the above procedure.
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the powder
chute for ground coffee.
ENever add more than one level measuring
spoon of ground coffee.
EIt is not possible to prepare 2 espressi or 2
coffees with ground coffee.
EUse ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
EIf you did not add a sufficient amount of
ground coffee, NOT ENOUGH POWDER
is displayed and the IMPRESSA stops the
operation.
EThe desired speciality coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation
and is once more ready for use.
The preparation of coffee, espresso, cappuccino
and latte macchiato with ground coffee follows this
model.
Example:Prepare a cup of coffee using ground
coffee.
Precondition:READY is displayed.
TPlace a cup under the dual spout.
TOpen the powder chute for ground coffee.
FILL POWDER
TPlace the filler funnel for ground coffee on
the powder chute.
TPlace one level measuring spoon of ground
coffee into the filler funnel.
TClose the powder chute for ground coffee.
SELECT BUTTON
> T Press the Coffee button to start preparation.
COFFEE, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
Adjusting the grinder
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
CAUTION
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T Only adjust the consistency of grind when
the grinder is running.
The consistency of grind is correct if the coffee
flows regularly from the dual spout. In addition a
fine, thick crema forms.
Example:Change the consistency of grind during
the preparation of an espresso.
TPlace a cup under the dual spout.

44
3 Daily operation
TOpen the cover of the grinder adjustment
switch.
< T Press the Espresso button to start prepara-
tion.
TTurn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
READY
Hot water
J CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
Precondition:READY is displayed.
TPlace a cup under the hot-water spout.
m T Press the Hot Water button.
WATER, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
3 Daily operation
Switching on the machine
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
When the IMPRESSA is switched on, a rinse opera-
tion is automatically initiated. In programming
mode you can change this setting so that the
machine prompts you to perform the switch-on
rinse, which must be started by pressing the
Maintenance buttonc(see Chapter 4 ‘Permanent
settings in programming mode – Rinses’).
TPlace a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine on.
HEATING
RINSING, the system rinses itself.The
operation stops automatically.
READY
Daily maintenance
To ensure that you get many years of reliable
service out of your IMPRESSA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
TRemove the drip tray.
TEmpty the coffee grounds container and
drip tray and rinse with warm water.
TReinsert the coffee grounds container and
the drip tray.
TRinse the water tank with clean water.
TDismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
TWipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfibre
cloth).
EIn the interests of hygiene, we recommend
changing the milk pipe on a regular basis
(approx. every 3 months). Replacement
pipes are available from specialised dealers.
Switching off the machine
When the IMPRESSA is switched off, the system is
automatically rinsed if a speciality coffee has been
prepared. If cappuccino or latte macchiato has
been prepared, cappuccino frother rinsing also
takes place.

45
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
TPlace a receptacle under the dual spout.
Q T Press the On/Off button.
RINSING, CAPPUCCINO
RINSING, the system rinses itself. The
operation stops automatically. Your
IMPRESSA is switched off.
EWhen the IMPRESSA is switched off with the
On/Off button, the machine does not
consume standby energy.
4 Permanent settings in pro-
gramming mode
Products
You can make the following permanent settings for
espresso and coffee:
UAmount of water: 25ML – 240ML
UCoffee strength: NORMAL, STRONG
UTemperature: NORMAL, HIGH
You can make the following permanent settings for
latte macchiato and cappuccino:
UAmount of milk foam: 3SEC – 120SEC
UInterval: 0SEC – 60SEC
UCoffee strength: NORMAL, STRONG
UAmount of water: 25ML – 240ML
UTemperature: NORMAL, HIGH
You can make the following permanent setting for
hot water:
UAmount of water: 25ML – 450ML
Permanent settings in programming mode always
follow the same model.
Example:Permanently change the coffee strength
(FLAVOUR) for espresso from STRONG to
NORMAL.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until PRODUCT is
displayed.
k T Press the Rotary Switch to enter the
programme item.
SELECT BUTTON
ENext select the button of the product for
which you would like to make settings. No
product is prepared at this point.
< T Press the Espresso button.
ESPRESSO
WATER
g T Turn the Rotary Switch until FLAVOUR is
displayed.
k T Press the Rotary Switch to enter the
programme item.
STRONG
g T Turn the Rotary Switch until NORMAL is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is set.
FLAVOUR
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the pro-
gramme item.
PRODUCT
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
EIf you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
IMPRESSA needs to be descaled. It is therefore
important to set the water hardness accurately.
The water hardness can be adjusted on a continu-
ous scale between 1° dH and 30° dH.

46
4 Permanent settings in programming mode
Example:Change the water hardness setting from
16°dH to 25°dH.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until HARDNESS
is displayed.
k T Press the Rotary Switch to enter the
programme item.
16°dH
g T Turn the Rotary Switch until 25°dH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is set.
HARDNESS
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Energy-saving mode
The energy-saving mode (Energy Save Mode,
E.S.M.©) helps you to prevent your machine from
consuming power unnecessarily and to actively
save energy:
UENERGYp
USoon after the last preparation, the
IMPRESSA stops heating up. After about 5
minutes the message ENERGY ON is
displayed.
UBefore you can prepare a speciality coffee,
speciality coffee with milk, or hot water, the
machine must heat up.
UENERGY-
UThe IMPRESSA is constantly ready for use.
UAll speciality coffees as well as hot water can
be prepared without having to wait.
Example:Change energy-saving mode from
ENERGYp to ENERGY-.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until ENERGYp is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ECONOMYp
g T Turn the Rotary Switch until ECONOMY-
is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, energy-saving mode is set.
ENERGY-
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Automatic switch-off
By instructing your IMPRESSA to automatically
switch itself off, you can cut down your energy
consumption. If this function is activated, your
IMPRESSA switches off automatically after the
preset time following the last action on the
machine.
The automatic switch-off can be set to between
15minutes and 9hours.
Example:Change the switch-off time from
2HRS to 1HRS.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until OFF AFTER
is displayed.
k T Press the Rotary Switch to enter the
programme item.
2HRS
g T Turn the Rotary Switch until 1HRS is
displayed.

47
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
k T Press the Rotary Switch to confirm the
setting.
OK, the switch-off time is set.
OFF AFTER
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Rinses
In the programme item RINSES you can make
the following settings:
UINIT RINSE MANUAL
UThe switch-on rinse must be started
manually.
UINIT RINSE AUTOMATIC
UThe switch-on rinse is started automatically.
UC-RINSE AFTER10'
UYou are prompted to perform a cappuccino
rinse 10minutes after preparation of a
speciality coffee with milk.
UC-RINSE NOW
UYou are prompted to perform a cappuccino
rinse immediately after preparation of a
speciality coffee with milk.
Example:Change the setting such that cappuccino
frother rinsing is performed immediately after
preparation of a speciality coffee with milk.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until RINSES is
displayed.
k T Press the Rotary Switch to enter the
programme item.
INIT RINSE
g T Turn the Rotary Switch until C-RINSE is
displayed.
k T Press the Rotary Switch to enter the
programme item.
AFTER10'
g T Turn the Rotary Switch until NOW is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
C-RINSE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit the pro-
gramme item.
RINSES
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY
Unit for amount of water
You can change the unit for the amount of water
from ‘ml’ to ‘oz’.
Example:Change the unit for the amount of water
from ML to OZ.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until DISPLAY is
displayed.
k T Press the Rotary Switch to enter the
programme item.
ML
g T Turn the Rotary Switch until OZ is displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the unit for the amount of water is set.
DISPLAY
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
READY

48
5 Maintenance
Language
In this programme item you can set the language
used by your IMPRESSA.
Example:Change the language from ENGLISH
to DEUTSCH.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until LANGUAGE
is displayed.
k T Press the Rotary Switch to enter the
programme item.
ENGLISH
g T Turn the Rotary Switch until DEUTSCH is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK, the language is set.
SPRACHE
g T Turn the Rotary Switch until EXIT is
displayed.
k T Press the Rotary Switch to exit programming
mode.
BEREIT
5 Maintenance
Your IMPRESSA has the following integrated
maintenance programmes:
UCappuccino frother cleaning (C-CLEAN)
URinsing the machine (RINSE)
UCappuccino frother rinsing (C-RINSE)
UCleaning the machine (CLEAN)
UChanging the filter (FILTER)
UDescaling the machine (DE-SCALE)
EYou can start the maintenance programmes
at any time in programming mode
(programme item RINSE). If no action is
taken in this programme item, program-
ming mode is exited automatically after
approximately 5 seconds.
Rinsing the machine
You can initiate the rinse operation manually at
any time.
Precondition:READY is displayed.
TPlace a receptacle under the dual spout.
k T Press and hold the Rotary Switch until
RINSE appears.
k T Press the Rotary Switch to enter the
programme item.
C-CLEAN
g T Turn the Rotary Switch until RINSE is
displayed.
k T Press the Rotary Switch to initiate the rinse
operation.
RINSING, the system rinses itself. The
operation stops automatically.
READY
Rinsing the milk system
After each milk preparation, the IMPRESSA
prompts you to perform a cappuccino rinse.
Precondition:CAPPUCCINO RINSE is
displayed.
TPlace a receptacle under the dual spout.

49
5 Maintenance
pt
es
nl
it
fr
ru
en
de
k T Press the Rotary Switch to start cappuccino
frother rinsing.
CAPPUCCINO RINSING, the milk
system is rinsed.
The rinse stops automatically. READY
appears on the display.
Cleaning the milk system
The dual spout must be cleaned daily if milk has
been prepared to make sure it functions perfectly
and also in the interests of hygiene. Your
IMPRESSA will not prompt you to clean the dual
spout.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the milk.
T Use only original JURA maintenance
products.
EJURA Cappuccino Cleaner is available from
specialised dealers.
k T Press and hold the Rotary Switch until
RINSE appears.
k T Press the Rotary Switch to enter the
programme item.
C-CLEAN
k T Press the Rotary Switch to start cappuccino
frother cleaning.
CLEANER FOR CAPPU.
TRemove the milk pipe from the receptacle
with milk.
TPour 250 ml of fresh water into a receptacle
and add one capful (max. 15 ml) of Cappuc-
cino Cleaner.
TImmerse the milk pipe in the receptacle.
TPlace another receptacle under the dual
spout.
k T Press the Rotary Switch.
CLEANING, the milk system and the pipe
are cleaned.
The operation is interrupted, WATER FOR
CAPPUCCINO.
TRinse the receptacle thoroughly, fill it with
250ml of fresh water and immerse the milk
pipe in it.
TEmpty the receptacle under the dual spout
and place it back underneath.
k T Press the Rotary Switch.
CLEANING, the milk system and the pipe
are rinsed with fresh water.
The operation stops automatically.
READY
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene. Your IMPRESSA will not prompt you to
clean the dual spout.
TRemove the milk pipe and rinse thoroughly
under running water.
TPress the releasing devices and pull the dual
spout down and off.

50
5 Maintenance
TPush the milk system down and remove it.
TDismantle the milk system into its individual
parts.
TRinse all parts under running water. If there
are severely dried on milk residues, firstly
immerse the individual parts in JURA
Cappuccino Cleaner and then clean them
thoroughly.
TFit the air intake pipe.
TReassemble the milk system, noting the
numbering on the parts.



TInsert the assembled individual parts into
the dual spout and press them together.
TFit the dual spout on the machine. It will
click into place audibly.
Inserting and activating the filter
Your IMPRESSA no longer has to be descaled if you
are using the CLARIS Blue filter cartridge. If you did
not activate the filter cartridge the first time you
used the machine, you can do this now as follows.
EPerform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your IMPRESSA always produces its
best.
Precondition:READY is displayed.
k T Press and hold the Rotary Switch until
RINSE appears.
g T Turn the Rotary Switch until FILTER- is
displayed.
k T Press the Rotary Switch to enter the
programme item.
NO-
g T Turn the Rotary Switch until YESp is
displayed.
k T Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
TRemove and empty the water tank.
TOpen the filter holder.