JWA RAINEY 71117 User manual

INSERT PAGE NUMBER
Imported by JWA Furniture Pty Ltd, BRISBANE, QLD AUSTRALIA.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
RAINEY
Double Bed
71117/71120
1

Allow 45 min For 2 People Additional tools
required
2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.

PARTS LIST
3
Part ltem QTY Part ltem QTY
1
Headboard
1 2
Rail
1
3
Rail
1 4
Footboard
1
5
Cent
re slat rail 1 6
Support
leg 2
7
Slat
1 8
Feet
4

4

5
Bolts pre-installed on Headboard
Bolts pre-Installed on Footboard

6

7

8
REGULAR CARE:
•Protect from directsunlight
•Vacuum regularly using low suction
CLEANING:
•Do not remove cushion covers for separate cleaning even though they may
have zippers
•Do not wash, Do not dry clean, Do not shampoo clean
•Clean with hot water extraction machine. Professionalcleaning
recommended
•Do not use dishwashing liquid or laundrydetergent
•Use only upholstery detergents
•Do not wet filling
•Dry in shade away from direct heat andsunlight
•Allow to dry thoroughly beforere-use
SPOT CLEANING:
•Do not rub
•Do not spot clean with anysolvent
•Treat spills and stains as soon aspossible
•Gently scrape off any soil or mop any liquid from the surface of the fabric
•Apply proprietary cleaning agents strictly according to instructions to
remove the residue of thespill
•Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
*Apply only water-based sorl resist(fabric protection)treatments. Do not use
aerosol products
*Pilling is not a fabric defect or facult and is not covered by warranty
*Pilling is a normal occurrence caused by wear and tear and does not affect the
durability or functionality of the fabric and is easily removed