Kane KANE458s User manual

www.kane.co.uk
Welcome
KANE458s
Flue Gas Analyser with
direct CO, CO2& CO
sensor protection
Quick reference guide

On / Off
Function keys
(see below)
Water trap &
particle filter
Rotary switch
Hello KANE458s getting started
1 Know your KANE458s
2 Connections
3 Before use
4 KANE ASSET MANAGEMENT (KAM)
Please register your analyser at www.kane.co.uk & download
the full instruction manual from our product selector
PLEASE READ ALL SAFETY WARNINGS IN THE MANUAL
Know your
KANE458s
1
Function keys
Icon Description
Data hold - Short press to hold current data on screen
Pump toggle - Long press to toggle pump on & o
Navigate Up - Short press to scroll up
Enter key - Used to select current option
Navigate Down - Short press to scroll down
Save log - Long press to store data
Print report - Short press to print a report

Before use
3
Check
Particle lter is not dirty; Water trap & ue probe empty of water;
Water trap & red plug tted to analyser; Flue probe hose connected to ue gas inlet;
Flue probe temperature plug connected to T1 temperature connection
Fresh air purge
Position ue probe in fresh air & press “On/O”
Analyser auto-calibrates within 60 seconds
Select “Ratio” on dial - in fresh air CO reading = 0ppm
Select “O2/E” on dial - in fresh air O2 reading = 20.9%
Select “Status” on dial to view
For best pressure sensor accuracy
Switch analyser on for 5 minutes to let temperature stabilise
Zero pressure sensor when analyser in exact position of use
To charge NiMH rechargeable batteries
Switch o
Connect charger - charging indicator illuminates
Display shows “BATTERY CHARGING” if batteries need charging
Connections
2
Battery charger
Watertrap drain
with red plug
Flue probe
temperature T1
Inlet temperature T2
Pressure
connection P1
Pressure
connection P2
- differential
Flue gas inlet
Red connector
- plugs into flue
gas inlet
Flue probe temperature plug
- plugs into T1
Narrower (+ve) pin must be on
right hand side Flue probe hose
Sensor upgrades
available
Options
Sensor

Northern Customer Service
Kane International Ltd
Gibfield Park Avenue, Atherton,
Manchester, M46 0SY, UK
Email: [email protected]
Southern & International Customer Service
Kane International Ltd
Kane House, 11 Bessemer Road,
Welwyn Garden City, Hertfordshire, AL7 1GF, UK
Email: [email protected]
0800 059 0800
Customer Service
Email: [email protected]
Stock No. QRG00088 Rev: 1.20720
Outside UK Call [phone]
4
Please register your analyser at www.kane.co.uk
& download the full instruction manual from your KAM dashboard
PLEASE READ ALL SAFETY WARNINGS IN THE MANUAL
KANE and the KANE logo (registered in the UK and elsewhere) are trademarks of Kane Group Limited, used under licence.
All other marks are trademarks of their respective holders. © 2020 Kane International Limited
Follow us on...
Register your KANE analyser to
create your KAM dashboard:
★ Simple online booking on www.kane.co.uk
★ Relevant product specific promotions, special offers & discounts
★ Automatic reminder when due for recertification
★ FREE POSTAGE returning your KANE analyser
★ SAME DAY annual FGA recertification OR YOUR MONEY BACK*
KAM
*Excludes KANE '9 series' analysers & UKAS certificates
KANE ASSET MANAGER (KAM)
Use all 11 digits