Kane KANE-LINK User manual

www.kane.co.uk
Welcome
KANE-LINK wireless
measurement & data transfer
Quick reference guide
Connect device
to FGA
1
Select Menu
option
2
To ADD, REMOVE & check
STATUS of optional KANE
LINK devices
use
Rotate dial to use & select LINK

Use to
select device
Use to enter
the serial number of each
device
Note: KANE-WPCP2 will
require serial number adding for
each clamp
KANE-DTHA2 serial number
Serial number more than 10
digits use last 10 digits only
Serial number less than 10
digits add 000 eg 0002001228
KANE-WPCP2 serial number
Select device
3
4
To transfer data to a connected
smart device running a KANE APP
Stock No. QRG00230 Rev: 1.00621
0800 059 0800
Customer Service
Email: [email protected] Outside UK Call [phone]
KANE and the KANE logo (registered in the UK and elsewhere) are trademarks of Kane Group Limited, used under licence.
All other marks are trademarks of their respective holders. © 2021 Kane International Limited
Follow us on...
Transfer data to
KANE APP
Rotate dial to use
& select APP