KAP JEEP 2014 KPLAY User manual

INSTRUCTION
MANUAL
CONTACT
W kaptrader.com
E [email protected]
A (05854) A-912 RM Tera-tower2, 201
Songpa-Dearo, Songpa-gu, Seoul, Korea
F ([phone]
DATA.
Wireless Carplay & Wired Android Auto
JEEP 2014 KPLAY
2021.05.17
JEEP KPLAY

INSTRUCTION MANUAL
CAR COMPATIBILITY SHEET
BRAND MODEL YEAR
JEEP
Cherokee 2014~2017
Grand Cherokee 2014~2017
CHRYSLER 300C 2016~2017
DODGE RAM 2014~2017

INSTRUCTION MANUAL
COMPONENT
▶Warning
Please contact your dealer if any component is missing.
▶Warning
Please contact your dealer if any component is missing.
LVDS CABLE
BOARD SUB BOARD POWER CABLE
FPC CABLE WIFI/BT ANTENNA
MIC

INSTRUCTION MANUAL
INTERFACE SPEC
1KPLAY INPUT
•Wireless APPLE CARPLAY
•Wired APPLE CARPLAY
•Wired ANDROID AUTO
•USB storage media
2INPUT
•1 x LVDS IN COMMAND SYSTEM
3OUTPUT
•1 x LVDS OUT OPERATION
5POWER
•Input Power : 8VDC ~ 24VDC
•Consumption Power : 12Watt, Max
6SWITCH INPUT MODE
•Possible to select CAR model while switching mode by DIP S/W
•By button on the Commander in the car via CAN
4TOUCH
•VIRTUAL ANALOG TOUCH (4PIN)

INSTRUCTION MANUAL
EXTERNAL DEVICE SPECIFICATIONS
3
4 5 6 7 8 9
2DIP SWICH 1PROGRAM
4POWER/CAN 5LVDS OUT 6USB USB 7MIC
8TOUCH 9AUX
4PIN Touch
1 2
3LED
10
Smartphone
USB storage
10 ANTENNA X 2

INSTRUCTION MANUAL
DIP SWITCH SETTING
PIN FUNCTION
INFORMATION
▲OFF ▼ON
1
No function
2
3REAR TYPE External OEM
4REAR DETECT CAN Wire
5BACK BUTTON
(MODE CHANGE) Do not use Use
6No function
7
CAR TYPE
8
ON 7 8
JEEP -Grand Cherokee (WK) (2016)
CHRYSLER -300C
ON 7 8
JEEP -Cherokee (KL)
ON 7 8
DODGE -RAM (2014)
ON 7 8
DODGE -RAM (2015)
ON 4ON 4
ON 5ON 5
ON 3ON 3

INSTRUCTION MANUAL
No PORT INFORMATION
1POWER
/CAN
No. Color Signal Assignment No. Color Signal Assignment
1Yellow BATTERY 2Yellow BATTERY
3Green CAN LOW 4 Orange CAN HIGH
5Blue CAN LOW 6 Red CAN HIGH
7 Red REAR VCC 8Brown REAR DETECT
910
11 12
13 Green MODE 14
15 Black GND 16 Black GND
CONNECTOR PIN ASSIGNMENT
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
1
1
2
No PORT INFORMATION
2TOUCH
No. Color Signal Assignment
1 Black Y+
2Green X+
3White Y-
4 Red X-
1 2 3 4
2

INSTRUCTION MANUAL
KPLAY CONTROL
MAIN SCREEN
1 2 3 4
1APPLE CARPLAY 2ANDROID AUTO 3USB MEDIA 4SETTINGS
VIDEO
MUSIC
IMAGE
Wireless
Cable
Cable
Apple CarPlay – 800 x 480
Apple CarPlay – 1280 x 480
Android AUTO –800 x 480
Android AUTO –1280 x 480

INSTRUCTION MANUAL
SCREEN VIEW
KPLAY Settings
No INFORMATION SELECTION FUNCTION
1Language
settings Languages You can change the language of the settings screen
2Connection
settings
Auto Phone
Connect
(Only for wired
connection)
Activation Automatically launch Android AUTO or Apple CarPlay
when smartphone is connected
Disabled Charge only when connecting a smartphone, select icon
to launch Android AUTO or Apple CarPlay
Driver Position
Left Use when driver's position is left
Right Use when driver's position is right
Wireless
Carplay
Activation Connect Apple CarPlay wirelessly
(Bluetooth)
Disabled Used to wire Apple CarPlay
Use touch on
Android Auto
Activation Touch is available when running Android Auto
Disabled Touch not available when running Android Auto
Link Type
Android Android Auto
Carlife do not select
(Update Coming Soon)
3Volume
control Volume You can adjust the volume of KPLAY
3Firmware
Information
Reset Factory reset
Sys Update Update firmware using USB
1
2
3
1
2
3
4
4

INSTRUCTION MANUAL
KPLAY CONTROL
MEDIA CONTROL
KPLAY
TOUCH SPK ANT
POWER DIGITAL DIP_S/W
MICUSB
APPLE
CARPLAY
Smartphone
connection
Connect AUX to your car and use KPLAY's microphone
No INFORMATION Can be used CONTROL NOTICE
1Apple
CarPlay
Wireless
connection
Use all
Apple CarPlay
Functions
•AUX
•MIC
•TOUCH
•Multiple connections are not supported
•Only one device can be connected
unconditionally
Cable
Connection
2Android
AUTO
Cable
Connection
Use all
Android AUTO
Functions
3USB Media Connection Music, Photo,
Video
USB Media
ANDROID
AUTO
or

INSTRUCTION MANUAL
KPLAY CONTROL
iPhone Wireless connection -Connection method
1. Activate Wireless Carplay in KPLAY Settings
Menu
(If Wireless Carplay is enabled, you cannot
connect by wire)
2. Choose CarPlay-BT in Bluetooth on iPhone
3. PIN Number “0000” enter 4. “Allow” select
5. “Use CarPlay” select
(Once connected, Bluetooth will be
disconnected and connected via Wi-Fi)
6. Enjoy CarPlay!
In KPLAY on iPhone
on iPhoneon iPhone
on iPhone In KPLAY

INSTRUCTION MANUAL
KPLAY CONTROL
If your iPhone fails to connect
Forget Bluetooth history
1. Make sure Siri is active
2. Delete the Bluetooth and CarPlay records as shown below,
3. disable and re-enable WiFi and Bluetooth, then try to connect again.
Forget CarPlay History
▶Warning
Due to the nature of the wireless connection, sometimes the connection is not working
properly
If you follow the same procedure as above, but the connection is not working properly,
reboot KPLAY and iPhone and try again

INSTRUCTION MANUAL
KPLAY CONTROL
If your Android Phone fails to connect
▶Warning
Android Auto may not run even if the cable is not broken
If you follow the same procedure as above, but the connection is not working properly,
reboot KPLAY and iPhone and try again
ANDROID AUTO APP Download
1. Check if your smartphone has ANDROID AUTO application
2. Replace the cable
Changing the cable

INSTRUCTION MANUAL
CONTROL
Returning from the carplay screen to the home screen
▶Warning
Select the icon on the home screen to operate it, and select the CARPLAY icon or ANDROID
AUTO icon again to move to the car play screen
APPLE CARPLAY ANDROID AUTO

INSTRUCTION MANUAL
FIRMWARE UPDATE
1. Add the firmware file provided in root folder
* of the USB
3. Select 'Sys Update' from the Settings menu
2. Connect USB to the KPLAY board with the
update file. The USB media will be scanned
automatically
Press the Home button on the top right
corner of the USB Media screen and select
the Settings menu
4. After the device reboots, check the
message and wait for the update to complete.
firmware files
Root folder
*Root folder : Top-level folder without adding folder
▶Warning
If USB with firmware is connected, the update will be performed every time the device is
rebooted

INSTRUCTION MANUAL
BUTTON CONTROL
Change Mode to Interface Screen
BUTTON PRESS FUNCTION
STEERING WHEEL
RIGHT SWITCH
Long press OEM screen to interface screen
Interface screen to the OEM screen
▶Screen change sequence : OEM > NAVI > OEM
RIGHT SWITCH

INSTRUCTION MANUAL
BUTTON CONTROL
Change Mode to Interface Screen
BUTTON PRESS FUNCTION
BACK
Short press OEM screen to interface screen
Interface screen to the OEM screen
▶Screen change sequence : OEM > NAVI > OEM
▶Warning
To use the back button, DIP-SW 5 must be turned ON(▼)
BACK

INSTRUCTION MANUAL
BUTTON CONTROL
Voice Control Button
BUTTON PRESS FUNCTION
HANG UP Press (In CarPlay Mode) SIRI
VR

INSTRUCTION MANUAL
Wifi/Bluetooth Antenna x 2
INSTALL MANUAL
KPLAY CONNECTION –SCREEN SETTING
CJ2014-CIP-CP
TOUCH SPK ANT
LVDS POWER
DIP_S/W
MICUSB
LEDPROGRAM
LVDS CABLE
AUX
Microphone
Smartphone
Cable Connection
ANDROID
AUTO
APPLE
CARPLAY
or
APPLE
CARPLAY
iPhone
Wireless connection
USB Media
or

INSTRUCTION MANUAL
INSTALL MANUAL
KPLAY CONNECTION –TOUCH SETTING
TOUCH
CALIBRATION
(IN KPLAY)
Touch and hold anywhere on the screen for 10 seconds
Touch in the center of the "+" icon
Touch Cursor To Calibrate
+ Touch
Touch and hold for 10 seconds