KaVo MASTER lase User manual

KA_MASTERlase+EXPERTlase_20130612_02_en.doc 25.06.2013
MASTER lase
EXPERT lase
Short Instructions for Use
The present short Instructions for Use cannot substitute for the Instructions for Use of the unit
and the Instructions for Use of the accessories!
Service Support
KaVo Dental GmbH
Bahnhofstraße 20
D-88447 Warthausen
Phone: [phone]
Mail: [e-mail]
Order number of the present Instructions for Use: 1.010.0274

Installing the Saphir-Tip handpiece
Installing the BareFiber Tip handpiece
Connecting the transmitting optical fibre
Registering the wireless foot switch
Touch the lower status bar.
Confirm the registration by touching OK.
Follow the instructions on the screen.
The unit switches to therapy mode.
The wireless foot switch symbolis displayed.
The wireless foot switch must be registered with the unit at each start-up!
(this function can be changed by the service staff)
The part of the transmitting optical fibre that is not needed for the treatment should be
kept below the fibre reel!
Switching the device on
Touch the On button .
Each laser unit that is not being used
must be protected from unauthorised
use.
Change the factory-set PIN!
Enter the PIN using the numbers bar
(the factory-set PIN is 1234).

Select theindication.
Optional settings:
See the Instructions for Use of the
unit with regard to the setting of
parameters and triggering of the
laserwith the wireless foot switch.
For contact cutting,
blacken the Saphir-Tip or the
BareFiber-Tip!
Pulse shape
Switch the unit to "Ready" (touch
thelaser bar).
Pilot
Applicationtime
Pulse duration / pulse
pause
Pressthefootswitch.
Power
Touchtheindication
element.
Touch
"Saveinfavorites".
Each indication can be saved with
factory settings and individual settings
(including pilot).
An indication that is alreadypresent in
the list of favorites, will be over-written.
Select the desired
specialty.
Confirm bytouching "OK".
Select the desired
indication.
The unit switches to
therapy mode.
Touchtheindication
element.
Select the indicationfrom the
listoffavorites.
The indication element is displayed
in yellow in therapy mode if you use
the indication fromthe list of
favorites.
Touch"Favorites".
Confirm bytouching "OK".
The unit switches to therapy
mode.
Make your selection by touching
one of the elements or values
shown. The colour of the selected
element or value changes from
white to green.
The slider scale is displayed for the
selection of a parameter.
Laser parameters can be changed
directly by touching a value shown
on the slider scale. Other values
can be displayed through dragging
over the slider.
Setting the parameters, triggering the laser
Saving favorites
Selecting favorites

Contin. (cw): The set laser power is emitted for as
long as the foot switch is pressed.
Interval: The set laser power is emitted at a pre-selected
ratio of pulse duration/pause for as long as the foot
switch is pressed
Continuous with set application time: The set
laser power is emitted for a pre-set period of time
when the foot switch is pressed.
Interval with set application time:
The set laser power is emitted at a pre-selected ratio of
pulse duration/pause for a pre-set period of time when the
foot switch is pressed
Peak: The maximal power of the unit (Pp) is emitted at a pre-selected ratio of pulse duration/pause for as long as the
foot switch is pressed. Pulse duration (tp) and average power (Pa) are set. The system automatically calculates the
required pulse pause (ti) from the selected pulse duration (tp), average power (Pa), and
the maximal power (Pp) in µs accuracy. e.g.: tp=1ms, Pa=5W, Pp= 10W ti = 1ms
Description
Control panel
Laser-Stop:
Emergency shut-off of the unit
Turns the device on and
provides access to menu settings
Turns the device on and
toggles "Standby" "Ready"
Touchscreen
Unit
Connector for transmitting optical fibre
Fibre reel
Handpiece and/or fibre holder
Foot switch, cable-type
Footswitch, wireless-wireless footswitch
(version of the unit equipped with wireless
foot switch)
Charger (version of the unit equipped with
rechargeable battery)
Accessories
see figures shown on the first page
BareFiber-Tip
Handpiece for BareFiber-Tip
Handpiece for Saphir-Tip
Saphir-Tip
Connectors
Foot switch connector
Interlock (safety lock)
Power cable
Charger connector
(version of the unit equipped with
rechargeable battery)
Wireless foot switch
Toggles the unit
"Standby" "Ready"
LEDs being on indicates the
"Ready" status of the unit
Triggers the therapeutic laser beam.
Switches the power the unit to next higher
level.