manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Kennedy
  6. •
  7. Jack
  8. •
  9. Kennedy HTJ03 User manual

Kennedy HTJ03 User manual

INSTR CTION MAN AL
KENNEDY
Q ALITY IND STRIAL TOOLING
AVAILABLE FROM YO R DISTRIB TOR
© The Kennedy Group Ltd. 01/18
Q ALITY G ARANTEE & WARRANTY
KENNEDY TOOLS carry a one year manufacturer’s warranty.
KENNEDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performance required by all sectors of industry.
KENNEDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
E C MACHINERY DIRECTIVE 2006/42/EC
DECLARATION OF CONFORMITY
We hereby certify that KENNEDY 3 TONNE HYDRAULIC TROLLEY JACK
odel HTJ03
complies with all the relevant provisions of the EC Directive 2006/42/EC
(The achinery Directive of the Council of European Communities)
Harmonised Standards Applied: EN 1494/A1:2008
anufactured for
KENNEDY TOOLS
Wigston, Leicester, England, LE18 2FS.
www.kennedy-tools.co.uk
Signed:
Date: 1st January 2018
Name: Keith Read
Position: HSQE Manager.
lAutomatic safety overload protection valve
lHeavy duty steel construction
lSwivel castor wheels improve manoeuvrability
lComfortable rubber hand grip
3 TONNE
HYDRA LIC TROLLEY JACK
MODEL:
HTJ03
ORDER CODE:
KEN-503-6360K
2 3
IDENTIFICATION
KENNEDY
Trolley Jacks are designed to help you work safely and efficiently.
Lifting equipment can be dangerous if the correct operating and maintenance
procedures are not followed. Operating instructions and basic safety procedures are
as follows:
SAFETY G IDELINES
l
Read, study and understand all warnings and operating instructions before use.
l
This jack is designed for use only on hard, level surfaces capable of sustaining the
load.
l
Never exceed the rated load capacity or tamper with the factory set overload valve.
l
Always use on specified jacking points, on a level surface and with a solid
foundation.
l
Always engage the handbrake before the vehicle is lifted to prevent wheel
movement.
l
Centre load on jack saddle before lifting.
l
Always work under a lifted load with an
additional means of support i.e. correctly
rated axle stands. This is a lifting device only.
l
Never lift a car when somebody is under it.
l
Never modify the jack in any way.
l
Keep clothing and body parts clear of the jack
hinge and ground contact area when lifting or
lowering the load.
l
Failure to heed these warnings may result in personal injury and/or property damage.
OPERATING INSTR CTIONS
ASSEMBLY
1.Remove the wire clip securing the handle socket.
This piece is here for shipping purposes only.
2. Using the hexagonal bolt provided, secure and fasten the two pump
handle poles together.
3. Unfasten the screw located in the handle socket.
4. Place the completed pump handle into the handle socket.
5. Secure the handle in place by tightening the screw in the handle
socket.
OPERATE
WARNING! Inspect the Trolley Jack before use for damage. If damaged
remove from service and get a qualified engineer to repair it.
Bleed the hydraulic system of air before using the
jack for the first time (see bleeding the system).
1. Make sure the jack and vehicle are on a hard surface.
2. Always set the vehicle parking brake and block the wheels.
3. Check the vehicle owner’s manual to locate the jack points.
4. Position the jack under the vehicle so that the lifting saddle will be
centred on a specified jacking point.
5. To engage piston pressure, turn the pump handle clockwise.
6. Pump the handle up and down to raise the load.
7. nce the load has been raised to the required height, use an
additional support (i.e. correctly rated jack stands) before continuing
work.
8. To lower the vehicle, turn the pump handle clockwise. Pump the
handle to lift vehicle off jack stands. Remove the jack stands. Turn
the pump handle counterclockwise, this will turn the release valve.
The speed at which the vehicle is lowered can be controlled by how
quickly the release valve is turned.
MAINTENANCE
We recommend that maintenance is carried out on the
Trolley Jack on a monthly basis to keep it operational.
1. Lubricate the ram, linkages, saddle and pump mechanism with light
oil.
2. Clean all surfaces and maintain all labels and warnings.
3. Check and maintain the ram oil level.
4. Check the ram every 3 months for any sign of rust or corrosion.
Clean as needed and wipe with an oiled cloth. When not in use
always keep the saddle and ram in the fully lowered position.
5. Visually inspect for cracked welds, damaged, loose, missing parts or
hydraulic oil leaks.
6. You should always inspect the Trolley Jack immediately if it has
been subjected to abnormal load or shock.
If the Trolley Jack is found to have been damaged in any way,
worn or operates abnormally in any way it should be removed
from service until repaired by an authorised person.
wners and operators should be aware that repair of this
product may require specialised equipment.
Do not use brake or transmission fluids or regular motor oil as
they can damage the seals. Always use a medium grade
Hydraulic il.
REFILLING OIL RESERVOIR
1. Turn the release valve counterclockwise to allow the ram to fully
retract.
2. With the jack in the level position, remove the rubber oil fill plug.
Stand the jack in a vertical position with the handle socket down.
The oil should be level with the bottom of the fill hole. If not, add
more clean hydraulic jack oil until level with the bottom of the fill
hole.
3. Replace rubber oil fill plug.
4. Check that the Trolley Jack is fully operational and bleed air from
system as required.
BLEEDING THE SYSTEM
1. Turn the release valve counterclockwise no more than one complete
turn.
3. Pump the handle several times to force out any air.
2. Push the rubber oil fill plug to one side.
4. Turn the release valve clockwise until it can no longer be turned.
5. Replace the rubber oil fill plug back in position.
STORAGE
Always store your jack in the fully lowered position. This will
help protect critical areas from corrosion.
SPECIFICATIONS
TROBLE SHOOTING
Possible Cause ActionProblem
Jack will not lift to full height. Low oil level. Check oil level (see above).
Jack will not hold load. Release valve not closing.
Hydraulic jack oil contaminated.
Pump valves not sealing.
Cylinder ram binding.
Contact your local agent.
Lift arm will not lower. Cylinder ram binding.
Parts worn.
Internal damage.
Broken or unhooked return spring.
Link arm linkage bent or binding.
Contact your local agent.
Jack feels spongy when lifting. See ‘Bleeding the system’ above. See ‘Bleeding the system’ above.
odel number ............................................................................................................................................ HTJ03
Order code ................................................................................................................................... KEN-503-6360K
aximum load ......................................................................................................................................... 3000KG
inimum height ....................................................................................................................................... 150mm
aximum height ...................................................................................................................................... 490mm
Dimensions ............................................................................................................... 630(L) x 344(W) x 180(H)mm
Saddle
Oil Plug
Pump
Handle
Handle
Socket
Adjustable
Screw
SPARES
For spare parts or servicing please contact your nearest agent. Remember to quote tool model number and spare part number when ordering spares.
The use of other than genuine Kennedy replacement parts may result in safety hazards, decreased tool performance and increased maintenance.
When disposing of components, etc. ensure that relevant environmental procedures are carried out.
Seal repair kit: KEN-567-2360K

This manual suits for next models

1

Other Kennedy Jack manuals

Kennedy B5048 User manual

Kennedy

Kennedy B5048 User manual

Kennedy T556 User manual

Kennedy

Kennedy T556 User manual

Kennedy T450L User manual

Kennedy

Kennedy T450L User manual

Kennedy KSJ010 User manual

Kennedy

Kennedy KSJ010 User manual

Popular Jack manuals by other brands

OTC 1546 PARTS LIST & OPERATING INSTRUCTIONS

OTC

OTC 1546 PARTS LIST & OPERATING INSTRUCTIONS

K Tool International XD KTI-XD63105 owner's manual

K Tool International

K Tool International XD KTI-XD63105 owner's manual

Super Handy GUT045 manual

Super Handy

Super Handy GUT045 manual

Enerpac Pow'r-Riser PR Series instruction sheet

Enerpac

Enerpac Pow'r-Riser PR Series instruction sheet

Tronair 02-7813-0100-A5 Operation & service manual

Tronair

Tronair 02-7813-0100-A5 Operation & service manual

Sealey Quality MACHINERY 2010S instructions

Sealey

Sealey Quality MACHINERY 2010S instructions

Zinko ZML-500 Operation & maintenance manual

Zinko

Zinko ZML-500 Operation & maintenance manual

Matco Tools JSA250USA Parts list and operating instructions

Matco Tools

Matco Tools JSA250USA Parts list and operating instructions

K-Tool XD KTI-63133A owner's manual

K-Tool

K-Tool XD KTI-63133A owner's manual

Sonic 48001 instruction manual

Sonic

Sonic 48001 instruction manual

Sealey 1100CXD.V5 instructions

Sealey

Sealey 1100CXD.V5 instructions

VEVOR MJ-1001B quick start guide

VEVOR

VEVOR MJ-1001B quick start guide

kincrome K12190 manual

kincrome

kincrome K12190 manual

QUALITY LIFTS QRJ03H Installation, operation & maintenance manual

QUALITY LIFTS

QUALITY LIFTS QRJ03H Installation, operation & maintenance manual

Sealey 10QJ.V4 instructions

Sealey

Sealey 10QJ.V4 instructions

Stanley STMT81251-1 Original instructions

Stanley

Stanley STMT81251-1 Original instructions

Bahco BH28050 Original instructions

Bahco

Bahco BH28050 Original instructions

TrestleJacks USA TJ220ADJ Standard operating procedure

TrestleJacks USA

TrestleJacks USA TJ220ADJ Standard operating procedure

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.