
2
Safety
O
Read these instructions carefully and retain for future reference.
OBefore using for the first time, remove all packaging and any labels,
including plastic blade covers. Wash the parts: see ‘Cleaning’.
OIf the plug or cord is damaged it must, for safety reasons, be replaced by
Kenwood or an authorised Kenwood repairer in order to avoid a hazard.
ODO NOT touch the sharp blades. The blade and disc are very sharp,
handle with care. Always hold by the finger grip at the top, away from
the cutting edge, when handling the sharp cutting blades, emptying the
bowl and during cleaning.
O
This appliance is not suitable for processing ice cubes.
OBefore lifting or carrying the appliance by the handle on the lid, always
check that the bowl and lid are securely locked in place.
OEnsure the cord is fully unwound before using the appliance.
ODO NOT process hot ingredients.
OBe careful if hot liquid is poured into the food processor bowl as it can
be ejected out of the appliance due to sudden steaming.
ONever leave the appliance unattended when it is operating.
ODo not move appliance whilst in operation.
ODo not exceed the maximum capacities stated in the recommended usage
chart.
ODo not operate your appliance for longer than 30 seconds when
processing dough without a rest period. Processing continuously for
longer periods can damage your appliance.
OAlways remove the knife blade before pouring contents from the bowl.
OKeep hands and utensils out of the processor bowl whilst connected to the
power supply.
OIf food needs to be pushed down use a suitable utensil such as a spatula.
OAlways switch off the appliance and disconnect from the supply if it is left
unattended and before assembling, disassembling or cleaning.
OCAUTION: Before removing the lid from the bowl wait until the
attachment/blades have completely stopped.
ONever use your fingers to push food down the feed tube. Always use the
pusher supplied.
ODo not use excessive force to push food down the feed tube – you could
damage your appliance.
ODo not use the lid lock to operate the processor, always use the on/off
speed control.
ODo not operate the processor with the both the knife blade and disc fitted.
Use only one attachment at a time.
OThis appliance will be damaged and may cause injury if the interlock
mechanism is subjected to excessive force.
ONever use an unauthorised attachment.
ONever use a damaged appliance. Get it checked or repaired: see ‘Service
and customer care’.
English