Kenwood AT340 User manual

Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China 19337/1

AT340

English 3 - 5
Nederlands 6 - 8
Français 9 - 11
Deutsch 12 - 14
Italiano 15 - 17
Português 18 - 20
Español 21 - 23
Dansk 24 - 26
Svenska 27 - 29
Norsk 30 - 32
Suomi 33 - 35
Türkçe 36 - 38
Ïesky 39 - 41
Magyar 42 - 44
Polski 45 - 47
Русский 48 - 51
Ekkgmij 52 - 55
Slovenčina 56 - 58
Українська 59 - 62
´¸!w
63 - 65
UNFOLD

UNFOLD

햲
햳
햴
햵
햶
햷
햸
햺
햻
햹
1
2
3
4
5
6
7

min
1
23
4
5
6
P
min
1
23
4
5
6
P









Use the Pro Slicer Grater to slice
and shred such foods as carrot,
cucumber, cheese, potato, cabbage,
nuts and chocolate.
The chipper plates can be used to
cut potatoes and other firm fruit and
vegetables.
before using your Kenwood
attachment
●Read these instructions carefully and
retain for future reference.
●Remove all packaging.
safety
●The plates are sharp, handle with
care when fitting, removing and
cleaning.
●Never use your fingers to push food
down the feed tube. Only use the
pushers supplied with the
attachment.
●Never remove the lid from the
attachment until the cutting plate has
completely stopped.
●Do not use excessive force to push
food down the feed tube – you
could damage the attachment.
●Never use a damaged attachment.
Get it checked or repaired: see
‘service and customer care’.
●Do not touch moving parts.
●Unplug the appliance before fitting or
removing parts or cleaning.
Refer to your main kitchen machine
instruction book for additional safety
warnings.
●This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1Wash the parts: see ‘Cleaning’.
key
햲pushers: large and small
햳feed tube
햴lid
햵shaft
햶cutting plate
햷sweeper
햸body
햹food outlet
햺gearbox assembly
햻extension chute
the cutting plates
available
The range of plates listed below are
included in pack and can be
identified by the numbers marked on
the plate as follows:-
Plate No 1 - extra fine shredding.
For parmesan cheese, chocolate
and nuts eg hazelnuts.
Plate No 2 - fine shredding. For
cheese, chocolate, nuts and firm fruit
or vegetables.
Plate No 3 - coarse shredding. For
cheese and firm fruit or vegetables.
Plate No 4 - thin slice. For cheese
and firm fruit or vegetables.
Plate No 5 - thick slice. For cheese
and firm fruit or vegetables
Plate No 6 - thin (julienne style)
chipper. Cuts potatoes for super
thin French Fries and ingredients for
salads, casseroles and stir fries (eg
carrot, courgette and cucumber)
Plate No 7 - standard chipper.
Cuts potatoes for thin French Fries
and ingredients for casseroles and
dips (eg cucumber, apple and pear.)
English
3

assembly and use
1Remove the high speed outlet cover
.
2Fit the gearbox assembly onto the
mixer .
3Push the desired cutting plate onto
the shaft . Each plate is numbered
for identification and the number
should be uppermost when the
plate is pushed onto the shaft.
4Fit the sweeper onto the shaft ,
with the flat surface of the sweeper
against the plate.
●For best results when using the
slicing/chipping plates, the sweeper
arm should be positioned opposite
the blade, as shown below.
5Attach the lid assembly to the body,
line up the symbol on the lid
with on the body. Then turn to
symbol to lock into place .
6Fit the assembled attachment onto
the gearbox and turn to lock into
position .
7If required fit the extension chute
into the food outlet and push firmly
into place . The extension chute
MUST be fitted when the
attachment is used with mixer
KM070 but can also be used with all
other mixers to direct the food into
the collecting bowl.
8Connect the mixer to the power
supply and place a bowl under the
food outlet.
9Choose which feed tube you want
to use. The pusher contains a
smaller feed tube for processing
individual items or thin ingredients.
To use the small feed tube -
first put the larger pusher inside the
feed tube .
To use the larger feed tube -
use both pushers together .
10 Put the food inside the feed tube.
11 Switch the mixer onto speed 3 and
at the same time push down evenly
with the pusher – never put your
fingers in the feed tube.
●At the completion of the processing
operation, raising and lowering the
pusher several times may help to
reduce the amount of food left on
the cutting plate.
12 Switch off and unplug.
hints
●Always use fresh ingredients
●Don’t cut food up too small. Fill the
width of the large feed tube fairly
full. This prevents the food from
slipping sideways during processing.
Alternatively, use the small feed
tube.
●When using a chipper plate, place
thin ingredients horizontally.
●When slicing or shredding, food
placed upright comes out shorter
than food placed horizontally.
cleaning
●Always switch off and unplug before
removing the attachment from the
kitchen machine.
●Dismantle the attachment fully
before cleaning.
●For easier cleaning always wash the
parts immediately after use.
●Handle the cutting plates with care –
they are extremely sharp.
●Never immerse the gearbox
assembly in water or allow it to get
wet.
All remaining parts can be washed
in hot soapy water, then dried
thoroughly. Take care as the cutting
plates are sharp. Alternatively wash
in the dishwasher (top rack only),
4

service and customer
care
●If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
UK
If you need help with:
●using your appliance
●servicing or repairs (in or out of
guarantee)
콯call Kenwood customer care on
023 9239 2333.
●spares and attachments
콯call 0870 2413653.
other countries
●Contact the shop where you bought
your appliance.
●Designed and engineered by
Kenwood in the UK.
●Made in China.
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product
must not be disposed of as urban
waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
5