TFKB-B-BA-e-2311 3
7.9 Adjustment .................................................................................................. 18
7.9.1 External adjustment <CalExt > ................................................................19
7.9.2 External adjustment with user-defined adjustment weight < caleud >.......20
7.9.3 Gravitational constant adjustment location < graadj >..............................22
7.9.4 Gravitational constant place of location < grause >...................................23
8Basic Operation ................................................................................................. 24
8.1 Turn on/off................................................................................................... 24
8.2 Simple weighing .......................................................................................... 24
8.3 Zeroing........................................................................................................ 25
8.4 Taring.......................................................................................................... 25
8.5 Change-over button and F button (standard settings)................................. 26
8.5.1 Switch-over weighing unit................................................................................27
8.5.2 Display gross weight value..............................................................................28
8.5.3 Open PRE-Tare settings.................................................................................28
8.5.4 Carry out Data-Hold function...........................................................................28
8.6 Underfloor weighing..................................................................................... 29
9Operating concept.............................................................................................. 30
10 Application <Weighing>.................................................................................. 32
10.1 Application-specific settings..................................................................... 32
10.2 PRE-Tare................................................................................................. 33
10.2.1 Take over the placed weight as PRE-TARE value...........................................33
10.2.2 Enter the known tare weight numerically.........................................................34
10.3 Data-Hold function ................................................................................... 34
10.4 Weighing Units......................................................................................... 35
10.4.1 Setting weighing unit.......................................................................................35
10.4.2 Weighing with multiplication factor via the application unit <FFA>...................36
10.4.3 Percent weighing by application unit <%>.......................................................36
11 Application <Counting>................................................................................... 37
11.1 Application-specific settings..................................................................... 37
11.2 Using the application................................................................................ 38
11.2.1 Piece counting.................................................................................................38
12 Application < Checkweighing >....................................................................... 41
12.1 Application-specific settings..................................................................... 41
12.2 Using the application................................................................................ 42
12.2.1 Checkweighing................................................................................................42
13 Menu............................................................................................................... 44
13.1 Navigation in the menu............................................................................. 44
