Keysight Technologies VXI bus 75000 C Series User manual

Keysight E1420B Universal
Counter
User Manual
75000 Series C


Notices
© Keysight Technologies, Inc. 1990-2019
No part of this manual may be repro-
duced in any form or by any means
(including electronic storage and retrieval
or translation into a foreign language)
without prior agreement and written con-
sent from Keysight Technologies, Inc. as
governed by United States and interna-
tional copyright laws.
Manual Part Number
E1420-90027
Edition
Third Edition, October 2019
Published by
Keysight Technologies, Inc.
900 S. Taft Ave.
Loveland, CO 80537 USA
Sales and Technical Support
To contact Keysight for sales and techni-
cal support, refer to the support links on
the following Keysight websites:
www.keysight.com/find/E1420B
(product-specific information and sup-
port, software and documentation
updates)
www.keysight.com/find/assist (world-
wide contact information for repair and
service)
Declaration of Conformity
Declarations of Conformity for this prod-
uct and for other Keysight products may
be downloaded from the Web. Go to
http://keysight.com/go/conformity and
click on “Declarations of Conformity.” You
can then search by product number to
find the latest Declaration of Conformity.
Technology Licenses
The hardware and/or software described
in this document are furnished under a
license and may be used or copied only in
accordance with the terms of such
license.
Warranty
THE MATERIAL CONTAINED IN THIS
DOCUMENT IS PROVIDED “AS IS,” AND
IS SUBJECT TO BEING CHANGED,
WITHOUT NOTICE, IN FUTURE EDI-
TIONS. FURTHER, TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE
LAW, KEYSIGHT DISCLAIMS ALL WAR-
RANTIES, EITHER EXPRESS OR IMPLIED,
WITH REGARD TO THIS MANUAL AND
ANY INFORMATION CONTAINED
HEREIN, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. KEYSIGHT
SHALL NOT BE LIABLE FOR ERRORS OR
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH THE
FURNISHING, USE, OR PERFORMANCE
OF THIS DOCUMENT OR OF ANY INFOR-
MATION CONTAINED HEREIN. SHOULD
KEYSIGHT AND THE USER HAVE A SEP-
ARATE WRITTEN AGREEMENT WITH
WARRANTY TERMS COVERING THE
MATERIAL IN THIS DOCUMENT THAT
CONFLICT WITH THESE TERMS, THE
WARRANTY TERMS IN THE SEPARATE
AGREEMENT SHALL CONTROL.
Keysight Technologies does not warrant
third-party system-level (combination of
chassis, controllers, modules, etc.) per-
formance, safety, or regulatory compli-
ance unless specifically stated.
DFARS/Restricted Rights
Notices
If software is for use in the performance
of a U.S. Government prime contract or
subcontract, Software is delivered and
licensed as “Commercial computer soft-
ware” as defined in DFAR 252.227-7014
(June 1995), or as a “commercial item” as
defined in FAR 2.101(a) or as “Restricted
computer software” as defined in FAR
52.227-19 (June 1987) or any equivalent
agency regulation or contract clause.
Use, duplication or disclosure of Software
is subject to Keysight Technologies’ stan-
dard commercial license terms, and non-
DOD Departments and Agencies of the
U.S. Government will receive no greater
than Restricted Rights as defined in FAR
52.227-19(c)(1-2) (June 1987). U.S. Gov-
ernment users will receive no greater
than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR 252.227-
7015 (b)(2) (November 1995), as applica-
ble in any technical data.

Safety Information
The following general safety precau-
tions must be observed during all
phases of operation of this instrument.
Failure to comply with these precau-
tions or with specific warnings or oper-
ating instructions in the product
manuals violates safety standards of
design, manufacture, and intended use
of the instrument. Keysight Technolo-
gies assumes no liability for the cus-
tomer's failure to comply with these
requirements.
General
Do not use this product in any manner not
specified by the manufacturer. The protec-
tive features of this product must not be
impaired if it is used in a manner specified in
the operation instructions.
Before Applying Power
Verify that all safety precautions are taken.
Make all connections to the unit before
applying power. Note the external markings
described under “Safety Symbols”.
Ground the Instrument
Keysight chassis’ are provided with a
grounding-type power plug. The
instrument chassis and cover must be
connected to an electrical ground to
minimize shock hazard. The ground pin
must be firmly connected to an electri-
cal ground (safety ground) terminal at
the power outlet. Any interruption of
the protective (grounding) conductor
or disconnection of the protective
earth terminal will cause a potential
shock hazard that could result in per-
sonal injury.
Do Not Operate in an Explosive
Atmosphere
Do not operate the module/chassis in
the presence of flammable gases or
fumes.
Do Not Operate Near Flammable
Liquids
Do not operate the module/chassis in
the presence of flammable liquids or
near containers of such liquids.
Cleaning
Clean the outside of the Keysight mod-
ule/chassis with a soft, lint-free,
slightly dampened cloth. Do not use
detergent or chemical solvents.
Do Not Remove Instrument Cover
Only qualified, service-trained person-
nel who are aware of the hazards
involved should remove instrument
covers. Always disconnect the power
cable and any external circuits before
removing the instrument cover.
Keep away from live circuits
Operating personnel must not remove
equipment covers or shields. Proce-
dures involving the removal of covers
and shields are for use by service-
trained personnel only. Under certain
conditions, dangerous voltages may
exist even with the equipment
switched off. To avoid dangerous elec-
trical shock, DO NOT perform proce-
dures involving cover or shield removal
unless you are qualified to do so.
DO NOT operate damaged
equipment
Whenever it is possible that the safety
protection features built into this prod-
uct have been impaired, either through
physical damage, excessive moisture,
or any other reason, REMOVE POWER
and do not use the product until safe
operation can be verified by service-
trained personnel. If necessary, return
the product to a Keysight Technologies
Sales and Service Office for service and
repair to ensure the safety features are
maintained.
DO NOT block the primary
disconnect
The primary disconnect device is the
appliance connector/power cord when
a chassis used by itself, but when
installed into a rack or system the dis-
connect may be impaired and must be
considered part of the installation.
Do Not Modify the Instrument
Do not install substitute parts or per-
form any unauthorized modification to
the product. Return the product to a
Keysight Sales and Service Office to
ensure that safety features are main-
tained.
In Case of Damage
Instruments that appear damaged or
defective should be made inoperative
and secured against unintended oper-
ation until they can be repaired by
qualified service personnel
Do NOT block vents and fan exhaust:
To ensure adequate cooling and venti-
lation, leave a gap of at least 50mm
(2") around vent holes on both sides of
the chassis.
Do NOT operate with empty slots: To
ensure proper cooling and avoid dam-
aging equipment, fill each empty slot
with an AXIe filler panel module.
Do NOT stack free-standing chassis:
Stacked chassis should be rack-
mounted.
All modules are grounded through the
chassis: During installation, tighten
each module's retaining screws to
secure the module to the chassis and
to make the ground connection.
Operator is responsible to maintain
safe operating conditions. To ensure
safe operating conditions, modules
should not be operated beyond the full
temperature range specified in the
Environmental and physical specifica-
tion. Exceeding safe operating condi-
tions can result in shorter lifespan,
improper module performance and
user safety issues. When the modules
are in use and operation within the
specified full temperature range is not
maintained, module surface tempera-
tures may exceed safe handling condi-
tions which can cause discomfort or
burns if touched. In the event of a
module exceeding the full temperature
range, always allow the module to cool
before touching or removing modules
from the chassis.
vi

Safety Symbols
A CAUTION denotes a hazard. It
calls attention to an operating pro-
cedure or practice, that, if not cor-
rectly performed or adhered to
could result in damage to the
product or loss of important data.
Do not proceed beyond a CAUTION
notice until the indicated condi-
tions are fully understood and met.
A WARNING denotes a hazard. It
calls attention to an operating pro-
cedure or practice, that, if not cor-
rectly performed or adhered to,
could result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indi-
cated conditions are fully under-
stood and met.
Products display the following sym-
bols:
Warning, risk of electric
shock
Refer to manual for addi-
tional safety information.
Earth Ground.
Chassis Ground.
Alternating Current (AC).
Direct Current (DC)
vii

viii

Keysight E1420B Universal Counter User Guide ix
0 E1420B Introduction
Keysight 75000 SERIES C DOCUMENTATION. . . . . . . . . . . . . . . . . . . . . . . . . . 21
Suggested Sequence for Using the Manuals . . . . . . . . . . . . . . . . . . . . . . . . 21
Related Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
How To Use This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Manual Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Manual Content. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Suggested Sequence for Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . 22
1 Getting Started
Chapter Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Important Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Overall Description of the E1420B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Measurement Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Measurement Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Input Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Additional Measurement Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
E14208 Simplified Block Diagram Description. . . . . . . . . . . . . . . . . . . . . . . 25
E1420B Quick Installation/Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Switch/Jumper Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Hardware Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Verifying E1420B Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
E1420B Power-on State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Executing Self-test (*TST?) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
In Case of Difficulty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Making Basic Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maximum Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Making A Frequency Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Interpreting Frequency Measurement Results Display. . . . . . . . . . . . . . 33
Making A Time Interval Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Interpreting Time Interval Measurement Results Display. . . . . . . . . . . . 35
E1420B Service, Support And Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Manual Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2 E1420B Connections, Configuration, and Installation
Chapter Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Where To Find Important Topics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Contents

x Keysight E1420B Universal Counter User Guide
Chapter Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Connectors and Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Front Panel Signal Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Maximum Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
INPUT 1 AND 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
INPUT 3, OPTION 030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ARM INPUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
INT/EXT REFERENCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Warm-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Front Panel Indicators And Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
VXIbus Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Internal Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Logical Address Configuration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Defining the Instrument Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Bus Grant and Request Configuration Procedure . . . . . . . . . . . . . . . . . . . . 44
System Default Logical Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Installation and Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cooling Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Hardware Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Verifying Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3 Using The E14208
CHAPTER GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Where To Find Important Topics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Chapter Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Programming the E1420B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Controller Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Series 200/300 HP BASIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
QuickBASIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Initialization State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Changing Default Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Measurement Task Tutorials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Maximum Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Frequency Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Example: Making A Frequency Measurement. . . . . . . . . . . . . . . . . . . . . 55
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Frequency Measurement Program Example . . . . . . . . . . . . . . . . . . . . . . 56
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Period Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Example: Making A Period Measurement . . . . . . . . . . . . . . . . . . . . . . . . 57
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Period Measurement Program Example . . . . . . . . . . . . . . . . . . . . . . . . . 58
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Time Interval Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Example: Making A Time Interval Measurement. . . . . . . . . . . . . . . . . . . 59

Keysight E1420B Universal Counter User Guide xi
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Time Interval Measurement Program Example. . . . . . . . . . . . . . . . . . . . 60
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Pulse Width Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Example: Making A Pulse Width Measurement . . . . . . . . . . . . . . . . . . . 61
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Pulse Width Measurement Program Example . . . . . . . . . . . . . . . . . . . . 62
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Ratio Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Example: Making A Ratio Measurement . . . . . . . . . . . . . . . . . . . . . . . . . 63
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Ratio Measurement Program Example . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Totalize Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Example: Making A Totalize Measurement. . . . . . . . . . . . . . . . . . . . . . . 65
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Totalize Measurement Program Example . . . . . . . . . . . . . . . . . . . . . . . . 66
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Totalize Programming Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Rise/Fall Time Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Rise Time Measurement Program Example . . . . . . . . . . . . . . . . . . . . . . 71
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Voltage Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Example: Making A Voltage Measurement . . . . . . . . . . . . . . . . . . . . . . . 73
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Voltage Measurement Program Example . . . . . . . . . . . . . . . . . . . . . . . . 74
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4 Understanding the E1420B Universal Counter
Chapter Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Where To Find Important Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Chapter Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Counter Configuration And The Measurement Procedure . . . . . . . . . . . . . . . . 76
E1420B Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
E1420B Measurement Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Making Measurements with SCPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
The MEASure, CONFigure, and SENSe Commands . . . . . . . . . . . . . . . . . . 81
Using MEASure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Using CONFigure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Using SENSe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
The INITiate, READ?, and FETCh? Commands . . . . . . . . . . . . . . . . . . . . . . 83
Using READ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Using INITiate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Using FETCh? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Measurement Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Frequency/Period Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Measurement Definition and Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

xii Keysight E1420B Universal Counter User Guide
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Channels 1 and 2 Trigger Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Channel 3 Trigger Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Gate (APERture) Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Pulse Width Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Measurement Definition and Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Ratio Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Measurement Definition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Gate Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Rise/Fall Time Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Measurement Definition and Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Time Interval Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Measurement Definition and Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Slope Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Time Interval Delay Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Totalize Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Measurement Definition and Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
INPUT SIGNAL CONDITIONING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
TRIGGER EVENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
ARMING AND GATING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Reading Measurement Results. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Synchronizing Measurement Completion (Totalize 1) . . . . . . . . . . . . . . . . . 95
Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Voltage Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Measurement Definition and Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Input Signal Conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
INPUT SIGNAL CONDITIONING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Input Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Input Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Input Attenuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Input Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Trigger Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Trigger Slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Damage Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Separate/Common Input 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Arming the Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Internal Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Immediate, Hold, and Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Keysight E1420B Universal Counter User Guide xiii
External Arming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Front Panel Arm Input Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
TTL Trigger Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Measurement Resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Setting The Aperture Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Resolution And Gate Time Calculations. . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Output Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Measurement Data Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Exponent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Totalize Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Min/Max/AC/DC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
5 E1420B Command Reference
Chapter Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Where To Find Important Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Chapter Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Command Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Common Command Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
SCPI Command Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Command Separator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Abbreviated Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Implied Channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Implied Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Parameter Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Optional Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Query Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Linking Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Command Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
IEEE 488.2 Common Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
SCPI Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
IEEE 488.2 Common Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
*CLS (Clear Status). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
*DMC (Define Macro) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
*EMC (Enable Macro) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
*EMC? (Enable Macro Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
*ESE (Standard Event Status Enable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
*ESE? (Standard Event Status Enable Query) . . . . . . . . . . . . . . . . . . . . . . 130
*ESR? (Event Status Register Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
*GMC? (Get Macro Contents Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
*IDN? (Identification Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
*LMC? (Learn Macro Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
*OPC (Operation Complete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
*OPC? (Operation Complete Query). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
*PMC (Purge Macros) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
*RCL (Recall). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

xiv Keysight E1420B Universal Counter User Guide
*RST (Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
*SAV (Save) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
*SRE (Service Request Enable). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
*SRE? (Service Request Enable Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
*STB? (Status Byte Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
*TRG (Trigger) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
*TST? (Self-Test Query) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
*WAI (Wait) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
E1420B SCPI COMMANDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
ABORt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Parameters: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
ARM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Subsystem Syntax:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
[:SEQuence[1] or :STARt] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
:SEQuence2 or :STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
[:LAYer[1]]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
[:IMMediate] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
:LEVel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
:SLOPe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
:SLOPe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
:SOURce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
:SOURce? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
CONFigure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
:AC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
:DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
:FREQuency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
FREQuency:RATio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
:FTIMe and :FALL:TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
:MAXimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
:MINimum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
:NWIDth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
:PERiod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
:PWIDth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
:RTIMe and :RISE:TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
:TINTerval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
:TOTalize. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
CONFigure? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
DIAGnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
:CALibrate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
:ASSembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
BLOCk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
READ:MRC? <EREG/TREG>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
READ:INT?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

Keysight E1420B Universal Counter User Guide xv
UFAil[?] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
FETCh? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
INITiate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
[:IMMediate]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
:CONTinuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
:CONTinuous? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
INPut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
:ATTenuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
:ATTenuation? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
:COUPling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
:COUPling?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
:IMPedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
:IMPedance? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
:ROUTe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
:ROUTe?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
MEASure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
MEASure Command Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
MEASure Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
MEMORY Subsystem (Option 040) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
:VME:ADDRess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
:VME:ADDRess? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
:VME:SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
:VME:SIZE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
:VME:STATe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
:VME:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
OUTPut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
:TTLTrg<n>[:STATe] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
:TTLTrg<n>:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
:ROSCillstor:STATe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
:ROSCillator:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
READ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
SENSe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
:AVERage{:STATe} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
:AVERage[:STATe]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
:AVERage:COUNt? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
:EVENt:LEVei[:ABSOiute} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
:EVENt:LEVei[:ABSOlute]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
:EVENt:LEVel [:ABSolute}:AUTO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
:EVENt:LEVel [:ABSolute]:AUTO? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

xvi Keysight E1420B Universal Counter User Guide
:EVENt:LEVel:RELative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
:EVENt:LEVel:REL.ative? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
:EVENt:LEVel? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
:EVENt:SLOPe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
:EVENt:SLOPe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
:EVENt:HYSTeresis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
:EVENt:HYSTeresis?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
:FREQuency:APERture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
:FREQuency:APERture?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
:FREQuency:RANGe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
:FREQuency:RANGe:AUTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
:FREQuency:RANGe:UPPer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
:FREQuency:RANGe[:UPPer]?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
:SENSe:FUNCtion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
:FUNCtion? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
:PERiod:APERture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
:PERiod:APERture? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
:RATio:APERture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
:RATio:APERture? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
:ROSCillator:SOURce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
:ROSCillator:SOURce? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
:TINTerval:DELay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
:TINTerval:DELay[:STATe]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
:TINTerval:DELay[:STATe?]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
:TINTerval:DELay:TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
:TINTerval:DELay:TIME? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
:TOTalize:GATE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
:TOTalize:GATE:STATe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
TOTalize:GATE:STATe? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
:TOTalize:GATE:POL.arity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
:TOTalize:GATE:POLarity? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
:TOTalize:GATE:SOURce? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
STATus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Using the Operation Status Register. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
:OPERation:CONDition? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
:OPERation:ENABle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
:OPERation:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
:OPERation[:EVENt]?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Using the Questionable Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
:QUEStionable:CONDition?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
:QUEStionable:ENABle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

Keysight E1420B Universal Counter User Guide xvii
:QUEStionable:ENABle? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
:QUEStionable[:EVENt]? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
SYSTem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Syntax: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
:ERRor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
:PIMacro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
:VERsion? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
A Specifications
B Error Messages
C Performance Tests
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Important Topics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Chapter Summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Calibration Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Functional Performance Test Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Test Procedure Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Software Implemented Full Performance Testing. . . . . . . . . . . . . . . . . . . . . . 216
Functional Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Preliminary Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Power-up Self-Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Auto Frequency Measurement Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Ratio Measurement Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Input Signal Conditioning Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Time Interval Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223
External Arm Input Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
Option 010 TCXO Timebase Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Preliminary Procedures: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Option 030, Input 3 Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Full Performance Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Specifications Tested . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Uncertainties Analysis Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Alternate Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Preliminary Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Input 1/2: Measurement Sensitivity, Range, and Accuracy Tests . . . . . . . . . 234
Specifications Tested: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Input Condition B: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Input Condition C: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Input Condition D: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

xviii Keysight E1420B Universal Counter User Guide
Input Condition E: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
External Arm Range, Sensitivity, and Minimum Start-to-Stop Time Tests. . . 240
Input Condition B: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Auto Measurement Sensitivity, Range, and Accuracy Tests . . . . . . . . . . . . . . 242
Procedure A:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
Input Condition B: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
(Option 030) Input 3: Sensitivity, Range, and Accuracy Tests . . . . . . . . . . . . 244
Functional Performance Test Records. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
D Handling Problems
Appendix Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Software Versus Hardware Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
Monitoring Program Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
How the Error Queue Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Verifying System Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
System Checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Running Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
E Using Option 040- High Throughput/Shared RAM
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
E1420B Shared Ram Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Shared Memory Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Shared Memory Set-up Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Initiate Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Retrieve Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Example Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
HP BASIC EXAMPLE PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
"C" EXAMPLE PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
F New Capabilities
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
New SCPI Commands Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Phase Measurement Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Acquisition Timeout Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Input Impedance Default Control Commands. . . . . . . . . . . . . . . . . . . . 269
Option Identification Query Common Command . . . . . . . . . . . . . . . . . 270
Firmware Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Determining Firmware Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Phase Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
SCPI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272

Keysight E1420B Universal Counter User Guide xix
Command Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Query Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Phase Measurement Programming Example . . . . . . . . . . . . . . . . . . . . 274
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Least Significant Digit: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
RMS Resolution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Systematic Uncertainty: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Maximum Frequency: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Definitions of Uncertainty Terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
Performance Test. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Acquisition Timeout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
SCPI Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Command Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Status Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Query Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Behavior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Acquisition Timeout Programming Example. . . . . . . . . . . . . . . . . . . . . 283
Functional Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Typical Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Selectable Range and Resolution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Accuracy: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Input Impedance Default Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
SCPI Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Semantics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Input Impedance Default Control Programming Example . . . . . . . . . . 289
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Option Identification Query . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Common Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Query Response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290

xx Keysight E1420B Universal Counter User Guide

Keysight E1420B Universal Counter
User Manual
21
E1420B Introduction
Keysight 75000 SERIES C DOCUMENTATION
Suggested Sequence for Using the Manuals
1Keysight E1405 Command Module User's Manual. Contains information on
the logical addressing conventions used to create instruments that are
programmed using Standardized Commands for Programmable Instruments
(SCPI). This manual also describes the command module's resource manager
functionality and how to implement user-defined configurations. Also
included is GP-IB programming information.
2Keysight El400B Mainframe User's Manual.Contains installation information
to prepare the mainframe for use and explains how to install plug-in modules.
This manual also contains a detailed hardware description of the mainframe.
3Plug-In Module User's Manual. Contains programming and configuration
information for the plug-in modules. These manuals contain examples for the
most commonly used functions and give a complete SCPI command reference
for the module.
Related Documents
Beginner's Guide to TMSL. Explains the fundamentals of programming instruments
using Hewlett-Packard's Test and Measurements System Language (TMSL)
which is identical to Standardized Commands for Programmable Instruments
(SCPI). We recommend this guide to anyone who is programming with SCPI for
the first time. Hewlett-Packard part number H2325-90001.
Tutorial Description of the Hewlett-Packard Interface Bus. Describes the technical
fundamentals of the Hewlett-Packard Interface Bus (GP-IB). This document also
includes general information on IEEE 488.2 Common Commands. We
recommend this document to anyone who is programming with IEEE 488.2 for
the first time. The Hewlett-Packard part number is 5952-0156.
IEEE Standard 488.2-1987, IEEE Standard Codes, Formats, Protocols, and Common
Commands. Describes the underlying message formats and data types used in
SCPI and defines Common Commands. You will find this document useful if you
need to know the precise definition of certain message formats, data types, or
Common Commands. Available from: The Institute of Electrical and Electronic
Engineers, Inc.; 345 East 47th Street; New York, NY 10017; U.S.A.

22 Keysight E1420B Universal Counter User Guide
E1420B Introduction How To Use This Manual
VXIbus System Specifications. Hewlett-Packard part number E1400-90006.The
VMEbus Specification.Available from: VMEbus International Trade Association;
10229 N. Scottsdale Road, Suite E; Scottsdale, AZ 85253; U.S.A.
How To Use This Manual
Manual Overview
This manual shows how to operate, configure, and program the E1420B
Universal Counter. This plug-in module is a VXIbus message-based device which
can operate in C-size or (with an adapter) D-size mainframes.
If you are using the counter in a Keysight 75000 Series C mainframe, refer to the
"Keysight E1405 Command Module User's Manual" for system configuration
information. If you are using the counter in another manufacturer's mainframe,
refer to the applicable installation manual supplied by that manufacturer.
Most information in this manual applies to the counter operations in the Keysight
75000 Series C mainframe with a Keysight E1405 Command Module.
Standardized Commands for Programmable Instruments (SCPI) is used as the
programming language.
Manual Content
This manual has five chapters and four appendixes.
–Chapters 1 and 2 provide counter module description, configuration, and
quick-start information. Chapter 3 shows several ways to use the counter
to make measurements. For basic counter operations using SCPI, use
these chapters.
–Chapter 4 explains the details of measurement programming and chapter
5 describes each of the SCPI commands used to program the counter.
–Appendix A gives the counter's specifications, Appendix B provides error
message information, Appendix C provides complete performance test
information, and Appendix D gives solutions to operating problems.
Appendix E provides information about Shared Memory.
Suggested Sequence for Using This Manual
Other manuals for VXI bus 75000 C Series
2
This manual suits for next models
1
Table of contents
Other Keysight Technologies Cash Counter manuals

Keysight Technologies
Keysight Technologies 53210A User manual

Keysight Technologies
Keysight Technologies E1420B User manual

Keysight Technologies
Keysight Technologies 53150A User manual

Keysight Technologies
Keysight Technologies 53210A User manual

Keysight Technologies
Keysight Technologies 53150A User manual