Kiloview D300 series User manual

D300 Series

4K UHD Video Decoder/Gateway

USER MANUAL

Changsha KILOVIEW Electronics CO.,LTD.

Legal Notices

Subject to the receiving of this document from Changsha Kiloview Electronics Co., Ltd.,(Hereinafter

referred to “Kiloview”), the following terms are understood and agreed. Or else, please stop using this

document.

information of the company. No company or individual may copy, transmit, distribute, use or disclose the

document and any images, forms, data and other information contained in the document without the

prior written permission of the company.

is the registered trademark of Kiloview. The name and logo are the trademarks or registered

trademarks of the company. Other products or company names mentioned in this document may be the

trademarks or registered trademarks of their respective owners. The reading of this document without the

prior written consent of the company or the third party rights holder does not imply that the reader is

given any right to use any of the marks appearing in this document by implication, non-evidence or

otherwise.

This product complies with the design requirements related to environmental protection and personal

safety. The storage, usage and disposal of the product shall be in accordance with the product manual,

relevant contract or relevant national laws and regulations.

This document is provided "as is" and "only in this state". Products and technical updates are subject to

change without prior notice.

For matters not covered in this document, please visit our website www.kiloview.com for information and

technical support.

CONTENTS

1PRODUCT INTRODUCTION......................................................................................................................................................... 1

2 OPERATION GUIDANCE............................................................................................................................................................... 3

3 PACKING LIST AND INTERFACE DESCRIPTION.............................................................................................................................4

3.1 PACKING LIST........................................................................................................................................................................ 4

3.2 INTERFACE DESCRIPTION....................................................................................................................................................... 4

3.3 LED INDICATORS....................................................................................................................................................................5

4 INSTALLATION AND CONNECTION.............................................................................................................................................. 6

4.1 CONNECT POWER................................................................................................................................................................... 6

4.2 CONNECT DISPLAYER............................................................................................................................................................. 6

4.2.1 Connect SDI displayer...................................................................................................................................................6

4.2.2 Connect HDMI display....................................................................................................................................................7

4.3 CONNECT ANALOG AUDIO..................................................................................................................................................... 7

4.4 CONNECT NETWORK...............................................................................................................................................................7

5 LOGIN AND NETWORK CONFIGURATION................................................................................................................................... 8

5.1 LOGIN TO WEB PAGE.............................................................................................................................................................. 8

5.2 NETWORK CONFIGURATION................................................................................................................................................. 10

6 FUNCTION CONFIGURATION.....................................................................................................................................................12

6.1 MEDIA（PULL STREAM AND DECODE）......................................................................................................................................12

6.1.1 Video source.................................................................................................................................................................12

6.1.1.1 Add RTMP source...................................................................................................................................................................... 12

6.1.1.2 Add SRT source......................................................................................................................................................................... 13

6.1.1.3 Video sources list....................................................................................................................................................................... 14

6.1.2 Video output setting.................................................................................................................................................... 16

6.2 SIP.......................................................................................................................................................................................19

6.2.1 Add SIP........................................................................................................................................................................ 19

6.2.2 State............................................................................................................................................................................. 19

6.2.3 Account Settings...........................................................................................................................................................19

6.2.4 Call Set........................................................................................................................................................................ 20

6.3 STREAM (D300 PLUS/PRO ONLY)....................................................................................................................................... 22

6.3.1 Add Publishing Points.................................................................................................................................................. 22

6.3.2 State.............................................................................................................................................................................22

6.3.3 Source.......................................................................................................................................................................... 22

6.3.4 Server (Stream service)................................................................................................................................................ 23

6.3.4.1 RTSP service..............................................................................................................................................................................23

6.3.4.2 RTMP Service............................................................................................................................................................................23

6.3.4.3 SRT service................................................................................................................................................................................25

6.4 SYSTEM SETUP......................................................................................................................................................................... 27

6.4.1 User Management....................................................................................................................................................... 27

6.4.2 System Time................................................................................................................................................................. 27

6.4.3 Reset............................................................................................................................................................................ 28

6.4.4 Reboot..........................................................................................................................................................................28

6.4.5 Restore......................................................................................................................................................................... 28

6.4.6 Firmware......................................................................................................................................................................28

D300 Series·User Manual

1Product introduction

Kiloview D300 4K UHD video decoder is a professional hardware decoding device that can decode

multiple video streams without relying on a computer. It can decode multi-channels network video

streams (from such as IP-Camera, RTSP/RTMP/RTP/SRT unicast or multicast media stream etc.) to SDI

signal and HDMI signal video output. It supports 4K UHD resolution, and supports multi-channels video

stream split screen to the display wall and dynamic switching.

Kiloview D300 Plus/Pro video gateway is an embedded multi-media gateway device with high

performance that integrates core functions such as streaming media protocol conversion, streaming media

distribution service, multi-channels video decoding and video picture segmentation. It can be applied to

different systems, different manufacturers, different types, and different encoded video formats to realize

format conversion, protocol intercommunication, decoding output, and split display of the video content.

At the same time, it works as a stream media server with the capability for 100 concurrent access.

D300 Technical Parameters:

Model D300

Input 2 *100/1000M RJ-45 adaptive Ethernet ports

Video Output 1 *SD/HD/3G-SDI, Up to 1080P 60Hz

1 *HDMI 2.0, Up to 3840x2160@60Hz

Output format support

SDI: up to 1080P60Hz; HDMI: up to 4k. Details as below:

SDI: 1080P60/59.94/50, 1080P30/29.97/25/24/23.98

1080I60/59.94/50 720P60/59.94/50 570I/50 480I/60

HDMI: 4K 3840x2160@60/30, 1080p60/50, 1080p24/25/30, 1080i60/50,

720p60/50

Compatible with VESA standard format

Audio output SDI/HDMI embedded or analog line-out output

Input Media protocol RTMP/SRT/HLS/TS over UDP/RTP/RTSP/ONVIF, etc.

SDI TRANSMISSION

DISTANCE

Belden 1694A cable standard: SD SDI ≥ 350m; HD SDI ≥ 180m; 3D SDI ≥

100m

Video decoding H.264/H.265

Audio decoding AAC/G.711

Decoding delay <200ms(adjustable)

Decoding ability

4K 30Hz：up to 4 channels simultaneously

1080P 50Hz/60Hz：up to 8 channels simultaneously

1080P 30Hz,1080I 50/60Hz or 720P and below：up to 16 channels

simultaneously

Split screen display Support 1/2/4/6/8/9/16 self-defined screen splitting

Management Web

Power supply/

consumption 12V,1A / 6w

Dimension/weight 140*105*28mm/380g

Working temperature -20℃~60℃

D300 Series·User Manual

D300Plus/D300Pro parameters：

Model D300Plus/D300Pro

Input 2 *100/1000M RJ-45 adaptive Ethernet ports

Decoding output 1* SD/HD/3G-SDI, Up to 1080P 60Hz;

1* HDMI 2.0, Up to 3840x2160@60Hz

Analog audio

output/input 1*3.5mm line out; 1*3.5mm line in

USB 1*USB 3.0 Type-A

Input protocols RTSP/SRT/ONVIF/RTMP/TS-UDP/RTP/HLS/SIP

Out protocols RTSP/SRT/ONVIF/RTMP/TS-UDP/RTP/HLS/SIP/GB28181

Protocols convert

ability Simultaneous 4CH (D300 Plus) or 9CH (D300 Pro) 1080P video conversion

Streaming distribution

ability

D300Plus: unicast support up to 100ch RTSP/TS stream

D300Pro: unicast support up to 100ch RTSP/TS/RTMP/HLS stream(Max is

600Mbps)

Live broadcast ability

D300Plus: 4CH*4CH 1080P

D300Pro: 9CH*4CH 1080P

It supports 4 channels or 9 channels of network streaming distribution/live

broadcasting function,and each stream can be pushed to up to 4 different live

broadcast targets at the same time.

Decoding quantity

4K 30Hz H.264/H.265: Max is 4CH

1080P 50Hz/60Hz H.264/H.265:Max is 8 CH

1080P 30Hz or 1080I 50/60Hz or 720P and below H.264/H.265:Max is 16CH

Decoding standard H.264/H.265

SDI output format 1080P60/59.94/50,1080P30/29.97/25/24/23.98,1080i60/59.94/50,

720P60/59.94/50, 570i/50, 480i/60

HDMI output format 4K 3840x2160@60/30,1080p60/50,1080p24/25/30,1080i60/50,720p60/50,

compatible with VESA standard format

Video rate range 128Kbps ~ 40Mbps

Audio decoding AAC-LC / G.711 (aLaw / uLaw)

Audio rate range AAC: 8Kbps ~ 320Kbps G.711: 64Kbps

Decoding latency ≤200ms

Split screen display

Support 1/2/4/6/8/9/16; It can support the re-encoding release of 1-way

multi-screen split video, and the image supports 1080P60 H.264 encoding at

most.

Management Web

Power/consumption 12V/1A ≤6W

Dimension/weight 138*105*25mm / 380g

Working temperature -20 ℃ ~ 60℃

D300 Series·User Manual

2 Operation guidance

Installation and Connection of Device

Connect the power supply correctly and start the device. Connect the decoder HDMI/SDI interface to the

displayer as needed.

Network Connection and Configuration

First, connect the decoder's Ethernet port 1 to the switch or PC by using the network cable. Then, set up

your PC’s IP address in the subnet of 192.168.1.0/24, and login the web page through

http://192.168.1.168 (the default IP address of the Ethernet port 1 is 192.168.1.168), and the default login

user name/password is admin/admin. After login, set parameters such as IP/DNS of the Ethernet port in

the "Network" menu.

Adding Video Sources

(RTSP/RTMP/HLS and other video sources) according to the video source information, and then confirm,

you can add a video source.

Decoding output

The decoder has two output windows, select any output window and click the HDMI/SDI option to be

green, which means that the window stream is output to the corresponding HDMI/SDI interface. Then

drag the added video source to the output window and the decoder will start decoding it. If the decoding

is normal, the video will be output.

D300 Series·User Manual

3 Packing list and interface description

3.1 Packing list

Please check the parts and accessories you received are exactly.

Name Unit Quantity

D300/D300Plus/D300Pro SET 1

DC12V/1A power adapter PCS 1

User manual PCS 1

Certification and warranty card PCS 1

3.2 Interface description

1.USB port 2. SDI indicator 3. SDI output 4. Reset

5.Audio output 6. Audio input 7.Working indicator 8. Power

9.100/1000M Ethernet port 1 10. 100/1000M Ethernet port 2

11. HDMI output 12. HDMI indicator

D300 Series·User Manual

3.3 Led indicators

Mark Color Status Description

RED

ON Power is on

OFF Power is off

GREEN

Light Device/signal is normal

Flash The signal is not locked or the device is reset to factory settings

(the light will also flash)

Off Device/signal is abnormal

GREEN

Light Network is connected

Flash Device factory reset indication (the light will also flash)

Off Network is dis-connected

D300 Series·User Manual

4 Installation and connection

4.1 Connect power

Using the power adaptor (DC12V/1A) connected to the device, after the power is turned on, the device

starts working.

Note: Please use the standard power adaptor provided. Using other unqualified power supplies

may damage the device.

4.2 Connect displayer

Connect the SDI or HDMI cable to corresponding interface of the device (it can be connected at the same

time, the decoder supports two signals output simultaneously), and the other end is connected to display,

such as monitor or electronic screen, etc..

4.2.1 Connect SDI displayer

Using SDI cable to connect SDI output interface with SDI display.

D300 Series·User Manual

4.2.2 Connect HDMI display

Using HDMI cable to connect HDMI output interface with HDMI display.

4.3 Connect analog audio

If analog audio input and output are required, the analog audio interface needs to be connected; if not, no

connection is required.

4.4 Connect network

Connect one end of the network cable to the decoder Ethernet port 1, the other end is connected to the

network switch or the computer's Ethernet port.

Note: There are two Ethernet ports that you can connect to different networks. Normally, it can

work by connecting to Ethernet port 1.

D300 Series·User Manual

5 Login and network configuration

5.1 Login to web page

First, you need to set the decoder and the computer to be on the same network segment so that the

computer can login to the decoder's web page. The default IP of decoder network port 1 is 192.168.1.168.

If the computer IP is not 192.168.1.* network segment, it is necessary to set the computer network port IP

to 192.168.1.* network segment.

After setting up the IP address of the computer, open the web browser, directly input the decoder's IP

address (the default is 192.168.1.168) or the URL http://192.168.1.168 and click enter to open the

decoder's login interface. When you open the page, a dialog box for authentication will pop up, and you

need to fill in the user name and password, select the language of the menu. The default user name and

password of the decoder is “admin/admin”, and then click "login".

Note: Due to the browser compatibility issues, it may cause the web page display abnormal, it is

recommended to use Chrome or Firefox browser.

D300 Series·User Manual

After login, decoding parameters and functional parameters can be set on the web page of decoder. The

decoder page is shown in the following figure:

Note: The decoder has two Ethernet ports, and the default IP address belongs to different network

segments. When accessing, it is necessary to pay attention whether the interface inserted by the

network cable is corresponding or not: the default IP address of port 1 is 192.168.1.168; the default IP

address of port 2 is 192.168.2.168.

D300 Series·User Manual

5.2 Network configuration

The decoder has two Ethernet ports. Generally, it only needs to configure the address 1 of network 1 to

work properly. This IP can be used for network streaming and device management. The two ports can be

used as service separation between LAN and Internet or data flow separation between service and

management.

Click "Network" to enter the configuration page. The network interface icon is shown as green to indicate

the normal working state of network, and the network interface icon is shown as orange to indicate the

disconnected state of network.

Each network port can be configured with 3 IP addresses: "Address 1" is configured to be the working IP

of the device; "Address 2" is used as the default management address; "Address 3" can be used for other

purposes."IP1" and "IP3" can also be used as device management when properly configured.

Click the "Set" button of network 1 address 1 to configure the IP address of the interface. The way to

obtain the address can be selected as "DHCP Dynamic" and "ManualSet". The IP address obtained by

DHCP may change, while the IP address specified manually can be fixed for the convenience of device

management. IP address configuration is according to the actual situation of the local network

configuration.

D300 Series·User Manual

To choose manual configuration, you need to set the IP, Gateway, Mask, DNS parameters in turn. If the

local network is in 192.168.3. */24 subnet, you can configure Address 1 to 192.168.3.15, 255.255.255.0,

192.168.3.1, and 8.8.8.8.(Make sure that the IP address is not occupied)

After the IP address is configured, you can test whether the IP address can ping through other computers

in the local network, or access the web page of the device through http://192.168.3.15.

The configuration of network port 2 can be set as instructed for network port 1.

Only when the IP address configuration is correct can the device work properly.

NOTE

：

Because the device writes the configuration file to the system regularly for saving, the

device cannot power off immediately after the IP address is manually configured or modified,

otherwise the IP address may be lost. If you want to save the configuration immediately, you can

restart the device once on the web page.

D300 Series·User Manual

6Function Configuration

6.1 Media（Pull stream and Decode）

Click on the "Media" menu to set up the pull stream and decode. There are two main functions: one is to

add a video sources and show the video sources list; the other is to set two output parameters of decoder,

such as pull stream, split-screen and so on.

6.1.1 Video source

6.1.1.1 Add RTMP source

Click "Add" to configure the relevant parameters in the pop-up dialog box, and click "OK" to add a video

source.

NOTE

：

First of all, please get the correct video source URL address from other platforms. The abnormal video

source address will cause the device to not work properly. (Video source can be tested by VLC player.)

D300 Series·User Manual

The parameters of the video source are defined as follows:

6.1.1.2 Add SRT source

Add a SRT source in the page of video decoder by "Media"–"Add Source"–"SRT".

Name Video source name, can be set at will, support mixed Chinese and English

URL Address

Support RTSP, RTMP, RTMPS, RTP, UDP, HTTP and other protocols, decoder can

automatically identify the URL address. After entering the URL address, if some

advanced parameters are configured, the dialog box will automatically pop up to

configure the corresponding parameters. You can also click on the protocol options on

the page to set the parameters directly.

Transmission Mode Choose TCP or UDP

User/Password Configuration is based on whether or not the video source is authenticated by the user.

Normally, no configuration is required.

Decoding buffer and

delay

For a variety of different application scenarios and networks, to balance of delay and

fluency of the decoding, the device provides a variety of buffering strategies for users

to choose.

Zero buffer, 50ms, 120ms, 200ms, 500ms, 1s are optional. Users can

choose on actual network conditions, good network with lower latency, and

bad network with higher latency.

Video Receiving Port RTP protocol usage, Range 1-65535

Audio Receiving Port RTP protocol usage, Range 1-65535

Binding Network RTP protocol usage, Default auto

Video Coder RTP protocol usage,[PT,]CODER[/Timestamp-unit],i.e.96,H264/90000

Audio Coder RTP protocol usage,

[PT,]CODER[/Timestamp-unit/channels],i.e.96,MPEG4-GENERIC/48000/2

D300 Series·User Manual

Setting parameters means the following:

Name: You can name it freely, supporting letters and numbers combination;

Connection Mode: Listener;

Port: Configure a listening port which should be consistent with the sending port;

Latency: please set it according to the configuration of the video encode and the final delay will be the

larger one between encoder and decoder. Default is 125ms;

Encryption Mode/AES KEY : AES-128, AES-192 and AES-256, it should be the same as the sender;

Bandwidth Overhead:It is set as the percentage value based on network link quality, the default is 25%;

Payload size: Please keep the same settings as the sender, the default one is 1316.

Please add the SRT source to the output window, and the decoder starts to listen for SRT requests, it will

establish the SRT connection while receiving the right SRT "Call", and decode then output video.

6.1.1.3 Video sources list

This list shows all the video sources and source parameter information you added, not all of them are

decoded. To decode the output, you need to manually drag it to the upper output area to decode. When

the video source is shown as green "View/Pull", the video source is decoded or pushed; the representative

displayed as gray "Off" is not used as decoding source; and the Yellow "Connecting/Reconnecting"

indicates that the source is decoding abnormally in the decoder and tries to connect and decode. Click on

the "Detail" button in the upper right corner to set the bit rate and resolution of each video source to be

displayed or not to be displayed.

D300 Series·User Manual

View the video sources in the list, which shows the protocol type, name, bit rate, resolution, stream status

and IP address of the video sources. The button in the lower left corner is the "Delete" video source

button, and the button in the lower right corner is the "Setup" button. The Setup button can be modified

for the parameters of the video source.

D300 Series·User Manual

6.1.2 Video output setting

The decoder supports H.265/H.264 decoding and simultaneously output of the same and different sources

or split screens on the HDMI/SDI dual interface.

The decoder web page has two output windows, corresponding to the two hardware interfaces of

SDI/DVI. You only need to drag the added video source to the corresponding output window, and the

decoder will start decoding. Take "Output 1" as an example for detailed description of the control

❶----❽in the output window (as shown below):

NOTE

：

This window is only an operation window, which can’t preview the decoded video output.

If you want to view the decoded output video, you need to connect HDMI or SDI display for viewing.

D300 Series·User Manual

1Setting Video Output Parameters

Resolution:

Support different resolution configuration for HDMI (up to 3840x2160@60Hz) / SDI (up to

1920x1080@60Hz) with the same screen or split screen output. And it supports up to 4 CH of 4k video

or 16 CH of 1080p30 and below, or up to 8 CH of 1080P 50Hz/60Hz video decoding output

simultaneously. All resolutions marked with SDI only are valid on the SDI output interface only. On

HDMI interface, the output resolution will be the one that is close to the resolution.

If output on multi-interface and one interface can’t support appointed resolution, for example, if 4K

resolution is not supported on SDI, the system will choose a resolution that can be supported by multiple

interfaces.

HDMI/DVI Mode:

Three modes can be selected: automatic mode, HDMI mode and DVI mode. If "Automation" is selected,

the HDMI/DVI mode will be automatically selected according to the EDID description of the device

connected.

If the display is a DVI interface, you can use a HDMI to DVI converter to output the decoded video

directly to the DVI display.In DVI mode, the color space and audio parameters will not be set.

HDMI color space:

Optional "automatic", "RGB444", "YCBCR444", "YCBCR422", "YCBCR420". If "Automation" is

selected, an appropriate color space will be automatically selected according to the EDID description of

the HDMI device connected. If the output is not normal in this case, please choose the right HDMI color

space by yourself.

HDMI audio:

32K/44.1K/48KHz dual channel is optional. Please choose according to actual needs, default 48KHz.

2Display current video source information

It can display the current output of the video source name, current bit rate and other parameters.

Other manuals for D300 Series

This manual suits for next models

Table of contents

Other Kiloview Media Converter manuals

Popular Media Converter manuals by other brands

Bose

Bose Soundtouch Stereo JC owner's guide

Ltech

Ltech DIN-DMX-350 manual

Coretec

Coretec VCX-4402-E Installation and operating instruction manual

UNV

UNV DC550 E Series quick guide

MPL

MPL mTX2FX user manual

Intellisystem

Intellisystem IT-IMC-102B user manual

Vista

Vista VIPER-HDAENC16 user manual

Plura

Plura RUBIDIUM Series manual

SOUNDLIGHT

SOUNDLIGHT 3044BH operating manual

Kramer

Kramer DigiTOOLS VM-2HDMI user manual

Keysight

Keysight N7004A user guide

M-system

M-system 18CE instruction manual

Nitek

Nitek MC722ST-XX Installation and operation manual

Vacon

Vacon 20 Complete user's manual

Hytronik

Hytronik HBEM8200D/F Installation and instruction manual

Gefei

Gefei MMIO DEMUX-HDSDI-4AES user manual

Sonifex

Sonifex Redbox Series User handbook

Viking

Viking ACD-10 Technical practice

Kiloview D300 Series User manual

Popular Media Converter manuals by other brands