kincrome K8036 User manual

DUAL WAY TORQUE WRENCH CLICK-TYPE
1
DUAL WAY
TORQUE WRENCH
CLICK-TYPE
K8036 1/4” 2-10Nm
K8500 3/8” 10-50Nm
K8501 1/2” 40-200Nm
K8502 1/2” 60-340Nm
K8503 3/4” 150-750Nm
K8504 1” 200-1000Nm
ED1 MARCH 2019
DUAL
SCALE
ACCURACY
+/-4% BLOW
MOULD
CASE
PROTECTIVE
IN BOTH
DIRECTIONS
WORKS

DUAL WAY TORQUE WRENCH CLICK-TYPE
2
1
Know Your Product
1. Square Drive
2. Quick Release Button (not included for K8502/3/4)
3. Forward/Reverse Switch
4a. Nm Scale
4b. lbf-in Scale(not shown)
5. Fine Scale
6. Locking Ring
7. Knurled Grip
Table Of Contents
Know Your Product .........................................................................................................2
General Safety Instructions ............................................................................................3
How To Use Your Torque Wrench ............................................................................... 3-4
Tips & Tricks For Your Torque Wrench ..........................................................................5
Torque Measurement Conversions & Specifications ...................................................6
Spare Parts ...................................................................................................................... 7
Care & Maintenance........................................................................................................7
Warranty...........................................................................................................................7
2 3 4a 6
4b 75

DUAL WAY TORQUE WRENCH CLICK-TYPE
3
1. Please study these instructions carefully before attempting to operate this wrench.
2. Never apply more torque than the maximum scale reading.
3. This torque wrench is designed for manual tightening of threaded fasteners only.
4. DO NOT USE IT AS A NUT-BREAKER OR FOR ANY OTHER PURPOSE.
5. Over torqued or defective fasteners and sockets may suddenly break. TO PREVENT INJURY,
KEEP PROPER FOOTING AND BALANCE AT ALL TIMES. DO NOT USE THE WRENCH IN PLACES
FROM WHICH YOU MAY FALL OR SLIP, OR AROUND ROTATING MACHINERY.
6. This torque wrench will not prevent you from applying more torque than set - this is not a torque
limiting tool. Learn how different amounts of torque ‘feel’ so you will reduce the possibility of
damage and/or injury due to accidental over torquing.
7. APPLY FORCE TO THE GRIP ONLY. DO NOT USE ‘CHEATER BARS’.
e.g. (A piece of pipe placed over the hand grip).
8. All torque wrenches should be calibrated at least once every 12 months or every 5,000 cycles,
whichever comes first. (See care and maintenance section on pg.7 for full care procedure).
9. This torque wrench operates in both directions, to tighten left and right threads.
10. Lifetime Warranty does not cover calibration.
11. Be sure all components, including all adaptors, extensions drivers and sockets are rated to
match or exceed the torque being applied. (See pg.6 for calculating the effect of torque wrench
extensions).
12. Always pull, do not push on the wrench handle and adjust your stance to prevent a possible fall
should something give.
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread) Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5 8.0 7.10
WARNING!
1. Your Torque Wrench is a precision instrument and should be treated as such.
2. Always store your Torque Wrench in the protective blow mould case.
3. If your Kincrome Torque Wrench is dropped, knocked, even in the protective blow mould
case, or any part replaced, the wrench must be immediately re-calibrated prior to next use.
4. Ensure torque wrench is stored at its lowest setting. Calibration costs are the responsibility
of the owner/user of the wrench.
GENERAL SAFETY WARNINGS
HOW TO USE YOUR TORQUE WRENCH

DUAL WAY TORQUE WRENCH CLICK-TYPE
4
HOW TO USE YOUR TORQUE WRENCH (Continued)
EXAMPLES OF TORQUE SETTINGS
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread) Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5
8.0 7.10
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread) Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5 8.0 7.10
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread) Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5 8.0 7.10

DUAL WAY TORQUE WRENCH CLICK-TYPE
5
TIPS & TRICKS FOR YOUR TORQUE WRENCH
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread)
Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5 8.0 7.10
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread)
Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5 8.0 7.10
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread) Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5 8.0 7.10
Pull down the Locking Ring (6).
Keep the Locking Ring (6) down and
rotate the handle (7) to the required
torque number according to the
primary scale (4a or 4b).
Make sure the Torque Scale (4a or
4b) table indicates the required
torque setting. Release the Locking
Ring (6) & ensure it clicks back into
the lock position.
Then operate the Torque Wrench
accordingly.
Clockwise Direction
(RH Thread) Locking Ring (6).
Dual Scale.
Dual-Direction
Click Type.
Grasp The Torque
Wrench At The Center Of
The Knurled Grip (7).
Operate Torque Wrench
At 90° Angle To The Grip.
Insert The Square Drive
Firmly On The Socket
When Using The Torque
Wrench.
Anti- Clockwise
Direction
(LH Thread).
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
1
2
4
6
8
10
3
5
7
9
13.3
22.1
39.8
57.5
75.2
92.9
31
48.7
66.4
84.1
Then operate the Torque Wrench
accordingly.
.8
Example Of Setting
Imperial Scale (lbf-in)
(26.5 lbf-in)
Example Of Setting
Metric Scale (Nm)
(2.9Nm)
92.9
75.2
57.5
39.8
22.1
84.1
66.4
48.7
31
.5
5.3 4.4
10
8
6
4
2
9
7
5
3
Nm
.4.6
3.5 8.0 7.10

DUAL WAY TORQUE WRENCH CLICK-TYPE
6
CONVERSION TABLE & SPECIFICATIONS
FORMULA FOR CALCULATING THE EFFECT OF TORQUE WRENCH EXTENSIONS
2~10Nm
K8036
K8500
K8501
K8502
K8503
K8504
13.3~92.9
10~50Nm 9.2~38.7 lbf-ft 3/8II 0.5 Nm 36.4410
193 20.2
Part
No.

DUAL WAY TORQUE WRENCH CLICK-TYPE
7
SPARE PARTS
• K8500-1 Repair Kit
• K8500-2 EVA Tray
• K8501-1 Repair Kit
• K8501-2 EVA Tray
• K8502-1 Repair Kit
• K8502-2 EVA Tray
• K8503-1 Repair Kit
• K8504-1 Repair Kit
CARE AND MAINTENANCE
It is normal for torque wrenches to go out of calibration with time and regular use.
Whatever type of torque wrench you are using, regular calibration will ensure that your tools remain
as accurate and effective as possible.
Putting in place a regular schedule for verifying and calibrating your torque wrench will mean less
room for error.
Kincrome Tools and Equipment recommend you have your torque wrench calibrated by a NATA
approved calibration facility, every 12 months or 5,000 cycles.
If your Kincrome Torque Wrench is dropped, knocked, even in the protective blow mould case, or any
part replaced, the wrench must be immediately re-calibrated prior to next use.
Your new Kincrome Torque Wrench is calibrated at the factory in Taiwan, prior to shipping and a
certificate of that calibration is supplied for your individually serialised torque wrench. It is the sole
responsibility of the owner/user of this tool to ensure the calibration is correct as the Torque Wrench
may have gone out of calibration during transit to retailers.
For peace of mind, you should get your torque wrench checked prior to first use.
Please note, the Kincrome Limited lifetime warranty does not cover the cost of calibration, or the
square drive of the wrench.
Kincrome will not be liable for any damage caused from using an uncalibrated or defective Torque
Wrench, due to failing to follow the correct maintenance, calibration and storage instructions within
this manual.
WARRANTY
Warranty given by Kincrome Tools & Equipment Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby,
Victoria, Australia (Tel [phone]) If this product has materials or workmanship defects (other
than defects caused by abnormal or non warranted use) you can, at your cost, send the product to
place of purchase, an authorised Kincrome service agent or one of Kincromes addresses for repair
or replacement. Your rights under this warranty are in addition to any other rights you have under the
Australian, United Kingdom & Ireland Consumer Law or other applicable laws. Our goods come with
guarantees that cannot be excluded under the Australian, United Kingdom & Ireland Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further
details please visit www.kincrome.com.au or call us. Due to minor changes in design or manufacture,
the product you purchase may sometimes differ from the one shown on the packaging.

www.kincrome.com.au