Kingwo MT02S User manual

November,2019
User Manual
GPS Talks

MT02S
Declaration
The contents of this manual will be updated from time to time without
prior notice; the updated content will be added to the new version of
this manual. KINGWO will improve or update the products or procedures
described in the manual at any time. If there is a description of the
product in the manual that does not match the actual product, the
actual product shall prevail. KINGWO has the final interpretation rights
of this manual.
GPS Talks

MT02S
Contents
Chapter 1:Photo ........................................................................................................................ 1
Chapter 2:product feature ........................................................................................................ 2
Chapter 3: Technical Specification ............................................................................................ 3
3.1 Main Unit ...................................................................................................... 3
Chapter 4: Functions ................................................................................................................. 4
4.1 【Basic function-Position】 ......................................................................... 4
4.1.1 Position and monitoring .................................................................... 4
4.1.2 Timely monitoring .............................................................................. 4
4.1.3 Blind zone compensation .................................................................. 4
4.1.4 Cornering Compensation ................................................................... 4
4.1.5 LBS Position ........................................................................................ 5
4.1.6 AGPS ................................................................................................... 5
4.2 【Basic function-Alarm function】 .............................................................. 5
4.2.1 Low Voltage Alarm ............................................................................. 5
4.2.2 Over speed, low speed alarm ............................................................ 5
4.2.3 Vibration alarm .................................................................................. 5
4.2.4 Movement alarm ............................................................................... 6
4.2.5 GPS error alarm .................................................................................. 6
4.3 【Basic function-Intelligent function】 ....................................................... 6
4.3.1 Intelligent Power Save ....................................................................... 6
4.3.2 Intelligent Self-diagnosis .................................................................... 6
4.3.3 Static Drift Suppression ..................................................................... 7
4.3.4 Mileage Statistics ............................................................................... 7
4.3.5 Remote Configuration ....................................................................... 7
4.3.6 Remote Upgrade (OTA)...................................................................... 7
4.3.7 Dual IP or Domain .............................................................................. 7
4.3.8 JTT808 protocol ................................................................................. 7
Chapter 5: Installation guide ..................................................................................................... 8
5.1 Installation Diagram ...................................................................................... 8
5.2 Installation and debugging process ............................................................ 9
5.2.1 SIM install ....................................................................................... 9
5.2.2 Main unit power on ....................................................................... 9
5.3 Parameter setting ............................................................................................ 9
GPS Talks

MT02S
1
Chapter 1: Photo
GPS Talks

MT02S
2
Chapter 2: Product Feature
1、 Support GPS/Beidou, AGPS, LBS,with accurate position performance；
2、 Built in high sensitive G-sensor accelerometer
3、 Supports intelligent self-diagnosis, intelligent power save mode, remote fuel and
power cut off, OTA and alarm functions
4、 Small in size and wide voltage, especially designed for scooter, motorcycle,
electric vehicles and automotive financial risk control project
5、 Small and convenient for conceal installation
GPS Talks

MT02S
3
Chapter 3: Technical Specification
3.1 Main Unit
Characteristics Description
Working
Voltage
DC 9V-36V，applicable to12V/24V vehicles
DC 9V-100V,applicable to scooter, motorcycle and electric
vehicles management
Working current Average current<40mA（DC12V），Maximum current<100mA
（DC12V）Sleep current<10mA
Built in battery 110mAH,3.2V，Lithium polymer battery
Battery
protection
Anti-200V power supply reverse connection; main voltage
detection;；
Dimension 82mm*23mm*13mm（L*W*H）
Weight 26±3g
Working
Temperature -20℃～70℃
Storage
Temperature -40℃～85℃
Relative
humidity 5%～95%
Frequency Quad band：GSM 850/900/1800/1900MHz
GNSS
Parameters
GPS L1:1575.42MHz;
BD B1: 1561.098MHz
GPS Talks

MT02S
4
Chapter 4: Functions
4.1 【Basic function-Position function】
4.1.1 Position and monitoring
Including timely upload, blind zone compensation, speed mileage statistics, area
monitoring and other functions, the backend sends positioning commands, and the
terminal uploads data including longitude, latitude, speed, direction, and status
information.
4.1.2 Timely monitoring
The vehicle GPS terminal can be set to upload the position and status information of
the vehicle to the backend at a certain time or a certain period or at a certain time
interval.
4.1.3 Blind zone compensation
When the terminal enters the GPRS blind zone, the track data will be saved at the
shortest 15S interval, and the blind zone data will be uploaded to the backend when
the GPRS is back online. The blind zone compensation data can be saved up to 1000.
4.1.4 Cornering Compensation
When the vehicle enters the curve lane, the terminal detects that the driving
direction has a certain angular deviation (default 15 degrees), and a timing feedback
message is added to ensure that the driving track is more accurate.
GPS Talks

MT02S
5
4.1.5 LBS
The terminal uses GPS positioning by default. When the GPS enters the blind zone
and cannot be accurately located, the terminal automatically switches to the base
station location. The terminal acquires the base station information every 30S and
uploads the base station information, the server interprets the specific location.
4.1.6 AGPS
The terminal has the AGPS function. When the terminal is connected to the GPRS,
the AGPS function can be used to speed up the positioning speed of the GPS module
and improve the positioning accuracy.
4.2 【Basic function-Alarm function】
4.2.1 Low Voltage Alarm
When the battery voltage on the vehicle is too low (0-11V or 19-22V), the vehicle
terminal reports a low voltage alarm to the backend
4.2.2 Over speed, low speed alarm
When the vehicle speed is higher than the overspeed alarm value, the vehicle
terminal will notify the backend. Similarly, when the vehicle speed is lower than the
low speed alarm value, a low speed alarm will be reported to the backend. The alarm
value is configurable.
4.2.3 Vibration alarm
The device activates the vibration alarm function. After the device is turned off for
more than 10 minutes (the fortification range: 1~20 minutes), the device generates
GPS Talks

MT02S
6
vibration and the ACC is not connected within 3 minutes (delay range: 1~10 minutes),
and the device will report the vibration alarm information.
4.2.4 Displacement alarm
An alarm is generated when the device is set to a displacement of more than 100
meters (message mode prompt), and the alarm information is reported when the
displacement radius exceeds 100 meters when the device is turned off. (Note:
displacement range 100~2000m)
4.2.5 GPS error alarm
When the terminal detects that the GPS/BD module is working abnormally, it reports
the GPS receiver failure alarm to the backend
4.3 【Basic function-Intelligent function】
4.3.1 Intelligent Power Save
The terminal has a built-in high-sensitivity G-sensor accelerometer that monitors the
vehicle for motion in real time. When no motion is detected for a long time, the
terminal automatically enters the power saving state, turns off the GPS/BD module,
and GSM enters the heartbeat return state. In this state, the power consumption of
the device is extremely low, which can greatly reduce the battery usage of the
vehicle.
4.3.2 Intelligent Self-Diagnosis
The vehicle terminal can perform self-diagnosis. In the event of a fault, it will send a
fault notification to the center, such as GPS, GSM, etc., and can automatically take
relevant measures. The backend can also query the current model, version,
configuration, running status, and device functions of the terminal.
GPS Talks

MT02S
7
4.3.3 Static Drift Suppression
The terminal has a built-in high-sensitivity G-sensor accelerometer and a complete
positioning data-filtering algorithm that filters out most of the static drift data to
ensure the accuracy of GPS data.
4.3.4 Mileage Statistics
The vehicle mileage data is returned to the backend along with the vehicle
positioning data; the initial mileage can be set when the vehicle is installed.
4.3.5 Remote Configuration
To remote set the terminal parameters including IP, center number and various of
monitoring parameters via the backend
4.3.6 Remote Upgrade (OTA)
As long as GPRS is available, remote firmware upgrade can be done remotely
4.3.7 Dual IP or Domain
The terminal supports dual IP connection between the primary server and the
standby server. The default connection is the primary server. If there is a problem
with the primary server, the terminal automatically switches to the standby server.
The primary server and the standby server can be set in either IP or domain name.
4.3.8 JTT808 protocol
This is government protocol in China, it supports connection to any platform that
support JTT808 protocol
GPS Talks

MT02S
8
Chapter 5: Installation guide
5.1 Installation Diagram
Green LED Status：
Solid on ：GPS Positioned
Blinks：LBS Positioned
Off: Unpositioned
Switch
SIM card
Red LED Status：
Fast Blink：GPRS
Connecting
Slow Blink：GPRS
connected
Solid on ：Module
Error
Red: Connect power+
Connect power-
Ignition Switch,ACC
Yellow: Lock car output
GPS Talks

MT02S
9
5.2 Installation and debugging process
5.2.1 SIM installation
Open the top cover of the terminal, insert the prepared SIM card into the SIM
cardholder, and then confirm that the SIM card button is in place. Please make sure
that the SIM card has the GPRS function enabled in advance and know the SIM card
number.
5.2.2 Main unit power on
After installing the SIM card, turn the battery switch to the ON position. At this time,
the red light starts to flash, indicating that the terminal is power on
5.3 Parameter setting
Note: The terminal is with built-in ID number, the factory can preset the customer's IP port,
generally do not need to do parameter setting; if you need to modify the IP, follow the below
instructions. The following two methods require the SIM card to start the SMS function.
TCP/UDP connection mode setting
For example, the client's server IP is: 119.23.233.52, port number: 8881. If it is a TCP connection
method, use SMS to edit: *88*1119023233052*8881*1#; if it is UDP connection, edit:
*88*1119023233052*8881*0#. The terminal will reply: set ok, the setting is successful.
MT02S usage requirements
The terminal is strictly forbidden to use according to the operating instructions ,disassemble,
collide, charge, soak, over 80 °C, human failure, force majeure damage, etc. may cause short
circuit, insufficient working time, battery deformation, liquid leakage, explosion, no warranty and
compensation will be provided by KINGWO.
GPS Talks

MT02S
10
Contact us at:
Shenzhen Kingwo IoT co., LTD.
Address:7th Floor, Block A, R&D Building, Tsinghua Information Hi-Tech
Port, Nanshan District, Shenzhen, Guangdong, China
Tel：[phone]
Fax：[phone]-8000
Website：www.vodofo.com www.365qczx.com
Email：vodofo[email protected]
GPS Talks