Kinze 4800 User manual

OPERATOR’S MANUAL
M0282-01
MODEL 4800 70CM EXPORT FRONT FOLD
PLANTER
02/20

TM
Model 4800M0282-01
01/19
Predelivery/Delivery Checklist
TO THE DEALER
Predelivery service includes assembly, lubrication, adjustment and test. This service helps ensure planter is delivered
to retail customer/end user ready for field use.
PREDELIVERY CHECKLIST
Use the following checklist after planter is completely assembled. Check off each item as it is found satisfactory or after
proper adjustment is made.
Row units properly spaced and optional attachments correctly assembled.
Row marker assemblies installed and adjusted at each end of the planter.
Vacuum meter and bulk fill components properly installed (as applicable).
All grease fittings in place and lubricated.
All working parts move freely, bolts are tight, and cotter pins are spread.
Check all drive chains for proper tension and alignment.
Check for oil leaks and proper hydraulic operation.
Hydraulic hoses correctly routed to prevent damage.
Inflate tires to specified air pressure and torque wheel lug bolts and lug nuts as specified in the Operator Manual.
All safety decals correctly located and legible. Replace if damaged.
All reflective decals and SMV sign correctly located and visible when the planter is in transport position.
Safety/warning lights correctly installed and working properly.
Paint all parts scratched during shipment or assembly.
All safety lockup devices on the planter and correctly located.
Auxiliary safety chain properly installed and hardware torqued to specification.
Vacuum fan PTO-driven pump correctly attached to tractor. Oil reservoir filled to capacity and system inspected for
leaks (If applicable).
Bulkfill/dry fertilizer hoses remain in place with no belt slipping or hose pinching between stub wing and vacuum
manifold.
Planter has been thoroughly checked and to the best of my knowledge is ready for delivery to the customer.
(Signature of Set-Up Person/Dealer Name/Date)
OWNER REGISTER
Name Delivery Date
Street Address Model No. 4800 Serial No.
City, State/Province Dealer Name
ZIP/Postal Code Dealer No.

M0282-01Model 4800
01/19
TM
Predelivery/Delivery Checklist
DELIVERY CHECKLIST
Use the following checklist at time planter is delivered as a reminder of very important information which should be
conveyed to retail customer/end user. Check off each item as it is fully explained.
Check proper operation of vacuum fan, bulk fill fan, and PTO-driven pump (If applicable) with tractor used with planter.
Life expectancy of this or any other machine is dependent on regular lubrication as directed in the Operator Manual.
All applicable safety precautions.
Along with retail customer/end user, check reflective decals and SMV sign are clearly visible with planter in transport
position and attached to tractor. Check safety/warning lights are in working condition. Tell retail customer/end user
to check federal, state/provincial, and local regulations before towing or transporting on a road or highway.
Give Operator Manual, Parts Manual, and all Instruction Sheets to retail customer/end user and explain all operating
adjustments.
Read warranty to retail customer/end user.
Complete Warranty and Delivery Report form.
To the best of my knowledge this machine has been delivered ready for field use and customer has been fully
informed as to proper care and operation.
(Signature of Delivery Person/Dealer Name/Date)
AFTER DELIVERY CHECKLIST
The following is a list of items we suggest to check during the first season of use of the equipment.
Check planter performance with retail customer/end user.
Check performance of vacuum meter or mechanical seed metering system with retail customer/end user.
Review importance of proper maintenance and adherence to all safety precautions with retail customer/end user.
Check for parts that may need to be adjusted or replaced.
Check all safety decals, reflective decals, and SMV sign are correctly located as shown in the Parts Manual and that
decals are legible. Replace if damaged or missing.
Check safety/warning lights are working properly.
(Signature of Follow-Up Person/Dealer Name/Date)
All registrations must be submitted online at “business.kinze.com” within 5 business days of delivery.
Retain a copy of this form for auditing purposes.
Tear Along Perforation

4800
This manual is applicable to: Model 4800 Forward Folding Planters
Record the model number and serial number of your planter along with date purchased:
Model Number _________________________________
Serial Number ___________________________________
Date Purchased__________________________________
Monitor Serial Number _______________________________________________
Measured Pulses Per km (Radar Distance Sensor) ________________________
Measured Pulses Per km (Magnetic Distance Sensor) ______________________
SERIAL NUMBER
The serial number plate is located on the planter frame as shown below. The serial number provides important information
about your planter and is needed to obtain correct replacement parts. Always provide model number and serial number
to your Kinze Dealer when ordering parts or when contacting Kinze Manufacturing, Inc.
Kinze®and the Kinze®logo are registered trademarks of Kinze Manufacturing, Inc.
Vacuum Meter, Electric Drive, and Flip Axle have patents pending.
MODEL 4800 70CM EXPORT
FRONT FOLDING PLANTER
OPERATOR'S MANUAL
M0282-01 02/20
Serial Number Plate Location

This page intentionally left blank.

TM
Model 4800M0282-01
01/19 i
Table of Contents
Contents
OVERVIEW
To The Owner ..................................1-1
Warranty ......................................1-3
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Tire Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Tractor Hydraulic Requirements and Use of Power Beyond
1-6
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
General Safety Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
MACHINE OPERATION
Loading and Unloading ...........................2-1
Row Marker Safety Lockup ........................2-1
Transport Axle Cylinder Safety Lockup ...............2-2
Drawbar Hitch Lockup ............................2-3
Wing Latch Lockup ..............................2-4
Initial Planter Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Tractor Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Bulk fill Tractor Mounted PTO Pump and Planter Mounted
Hydraulics ...................................2-7
OIL specification ................................2-7
Tractor Preparation and Hookup ....................2-8
Cylinder Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Cylinder Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Hydraulic Hose Information .......................2-13
Hydraulic Hose Information .......................2-14
Hydraulic Hose Information .......................2-15
Hydraulic Hose Information .......................2-16
Hydraulic Hose Information .......................2-17
Hydraulic Hose Information .......................2-18
Hydraulic Hose Information .......................2-19
Hydraulic Hose Information .......................2-20
Transporting Planter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21
Level Planter ..................................2-22
Jump Start Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Field Operation ................................2-23
Transport to Field Sequence Using Control Box .......2-24
Transport to Field Sequence Using kinze Blue vantage
system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
Field to Transport Sequence Using Control Box .......2-29
Field to Transport Sequence Using kinze Blue vantage
system ....................................2-32
Row Marker Operation using Control Box ............2-33
Row Marker Operation using kinze Blue vantage system 2-34
Row Marker Speed Adjustment . . . . . . . . . . . . . . . . . . . . 2-35
Row Marker Cable Adjustment ....................2-36
Row Marker Length And Disc Blade Adjustment.......2-37
Vacuum Meter System...........................2-38
Analog Vacuum or Pressure Gauge. . . . . . . . . . . . . . . . . 2-38
Bulk Fill System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-39
Bulk fill Entrainer Access . . . . . . . . . . . . . . . . . . . . . . . . . 2-40
Bulk Fill Tanks - Clean Out. . . . . . . . . . . . . . . . . . . . . . . . 2-41
Bulk Fill Scale Package Option ....................2-41
Monitor Seed Levels ............................2-42
Ag Leader InCommand 1200 Display ...............2-42
Point Row Clutches .............................2-43
Field Test .....................................2-44
Field test using blue vantage system. . . . . . . . . . . . . . . . 2-44
Field Check Seed Population. . . . . . . . . . . . . . . . . . . . . . 2-44
Determining Kilograms Per Hectare ................2-45
Determining Liters Per Hectare ....................2-45
Field Check Granular Chemical Application ..........2-46
Water Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-47
ROW UNIT OPERATION
Planting Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
“V” Closing Wheel Adjustment (Rubber or Cast Iron) ....3-1
Closing Wheel Shield (Rubber or Cast Iron “V” Closing
Wheels) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Covering Discs/Single Press Wheel Adjustment ........3-2
Quick Adjustable Down Force Springs Option . . . . . . . . . . 3-3
Pneumatic Down Pressure ........................3-4
Field Operation .................................3-5
Vacuum Settings ................................3-6
Finger Pickup Seed Meter . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
Brush-Type Seed Meter 2.0 ........................3-8
Seed Meter Clean out ...........................3-11
Additives .....................................3-12
Spiked Closing Wheel ...........................3-13
Row Unit Mounted No Till Coulter ..................3-13
Coulter Mounted Residue Wheels . . . . . . . . . . . . . . . . . . 3-14
Granular Chemical Banding Options . . . . . . . . . . . . . . . . 3-14
Granular Chemical Hopper and Drive ...............3-15
FERTILIZER
Connection Procedure ............................4-1
Preparing the System for Operation .................4-2
Piston Pump ...................................4-3
Startup Procedure ...............................4-4
Startup Procedure (Continued) .....................4-5
PTO Pump Drive Startup Procedure .................4-6
Calibration Procedure ............................4-7
Depth/Gauge Wheel Attachment for Notched Single Disc

M0282-01Model 4800
ii 01/19
TM
Fertilizer Opener ..............................4-7
Notched Single Disc Openers ......................4-8
Liquid Fertilizer Attachment .......................4-10
Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Rear Trailer Hitch Option .........................4-11
RATE CHARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
General Planting Rate Information. . . . . . . . . . . . . . . . . . . 5-1
LUBRICATION AND MAINTENANCE
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Lubrication Symbols .............................6-1
Wheel Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Grease Fittings .................................6-2
Notched Single Disc Opener ......................6-6
PTO Shaft Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Liquid Fertilizer Piston Pump Crankcase Oil Level ......6-7
Mounting Bolts and Hardware ......................6-7
Fertilizer Maintenance ...........................6-10
Fertilizer Maintenance (Continued) .................6-11
Vacuum Seed Meter Maintenance. . . . . . . . . . . . . . . . . . 6-12
Seed Meter Cleanout. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Vacuum Manifold Maintenance ....................6-13
Gauge Wheel Adjustment ........................6-13
Gauge Wheel Arm Pivot Spindle Replacement . . . . . . . . 6-13
Gauge Wheel Arm Bushing/Seal Replacement . . . . . . . . 6-14
15" Seed Opener Disc Blade/Bearing Assembly .......6-15
Seed Tube Guard/Inner Scraper ...................6-16
Row Unit Mounted No Till Coulter ..................6-17
Coulter or Row Unit Mounted Residue Wheels . . . . . . . . 6-17
Tractor Mounted Pump Drive and Oil Cooler . . . . . . . . . . 6-18
Check Valve ...................................6-19
Flow Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-19
Pressure Relief Valves ...........................6-19
Pressure Compensated Flow Control Valves. . . . . . . . . . 6-19
Solenoid Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20
Pneumatic Down Pressure Air Compressor Tank ......6-20
Row Marker Bearing Lubrication or Replacement . . . . . . 6-21
Transport and Lift/Ground Drive Wheel Bearing Repack or
Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22
Fertilizer Check Valve Cleaning and Repair...........6-23
Piston Pump Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23
Preparation for Storage ..........................6-24
Electrical Control Console Connections - isobus.......6-25
Worklights relay Cable ...........................6-27
Ethernet Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28
Harness 12V tail Light ...........................6-29
Harness PDP PWR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-30
Harness Row Unit Power Extension ................6-30
Harness Tail Light ..............................6-31
Harness Axle Position relay .......................6-31
Harness 4K RU Seed Meter ......................6-32
Harness Wing IPP ..............................6-33
Harness POWER...............................6-34
Harness LW IPN ...............................6-35
Harness RW IPN ...............................6-37
Harness Drawbar Hitch ..........................6-38
Harness Fold IPN ..............................6-39
Harness power (1-9) ............................6-41
Harness power (1-9) ............................6-42
Harness Bulk Fill IPN. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-43
Harness 12V POWER DL . . . . . . . . . . . . . . . . . . . . . . . . 6-43
Harness 24V Power (16-24) ......................6-44
Harness 24V power (10-12).......................6-46
Harness 24V power (13-15).......................6-47
Harness 24V power (13-15).......................6-48
Harness Bulk Fill Scale . . . . . . . . . . . . . . . . . . . . . . . . . . 6-48
Harness ASD Scale Can . . . . . . . . . . . . . . . . . . . . . . . . . 6-49
Harness Row Unit ESD drain . . . . . . . . . . . . . . . . . . . . . 6-49
Harness ASD Scale Can . . . . . . . . . . . . . . . . . . . . . . . . . 6-50
Harness fertilizer Flow Center . . . . . . . . . . . . . . . . . . . . . 6-51
Harness Fertilizer Flow Center ....................6-51
Harness Fertilizer Flow Stub Wing. . . . . . . . . . . . . . . . . . 6-52
Harness Fertillizer Flow Center . . . . . . . . . . . . . . . . . . . . 6-52
Hydraulic Hose Life .............................6-53
Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-54
Transport Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-54
Inflation Specifications ...........................6-55
Finger Pickup Seed Meter Inspection/Adjustment. . . . . . 6-56
Cleaning Finger Pickup Seed Meter For Storage ......6-57
Brush-Type Seed Meter Maintenance ...............6-58
Cleaning Brush-Type Seed Meter For Storage ........6-59
Vacuum Manifold Maintenance ....................6-59
mechanical planter with PTO and Bul kfill Hydraulic system
6-60
Vaccum planter with PTO hydraulic system...........6-61
Vaccum planter with Bulk Fill and dry fertilizer hydraulic
system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-62
Vaccum planter with Bulk Fill and dual section PTO hydraulic
system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-63
mechanical planter hydraulic system . . . . . . . . . . . . . . . . 6-64
TROUBLESHOOTING