KISANKRAFT KK-IC-6320 User manual

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 1 of 28
Product
Agricultural
Inter-Cultivator
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-IC-6320
WARRANTY
PERIOD
6MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s Sign
Warranty Policy
What is covered: KisanKraft Limited and its manufacturers warrant this product to be free
from defects in material or workmanship. All parts defective in material and workmanship
are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limitedto repair or replacement by KisanKraft Limitedor its manufacturers
of such parts as appear to KisanKraft or its manufacturers, upon inspection, to be
defective in material and/or workmanship. KisanKraft or its manufacturers make no
warranty with respect to items not manufactured or sold by them. No onsite warranty is
provided by KisanKraft Limited or its manufacturers. Defective items must be brought/sent
to our Authorized Dealer or KisanKraft Limited’s office for service.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor itsauthorized dealers assume any responsibility,
if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine or
misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage, (6)
Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper set
up, adjustments, tampering or altered products (8) Any modification to the product what-
so-ever.
Important: (1) Normal maintenance and adjustments to the product is the responsibility
of the customer. (2) Normal wear and tear are not covered under warranty. (3)
Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, sparkplugs,
nylon line, air-filters, fuel-filters, oil seals and gaskets etc. are not covered under the
warranty. (4) Electrical Motor, Electrical Parts, Battery Etc. are not covered under the
warranty.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 2 of 28
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be liable
for general damages, including bodily injuries, or for incidental or consequential damages
including, but not limited to, loss of use, loss of profits, loss of production, expense of
substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations, or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranties hereunder, including,
but not limited to, any implied warranty of merchantability must be brought within the
applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft
Limited or any of its manufacturers has the authority to increase or alter the obligations of
this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended to
the first end user (original purchaser), and no warranty is made, nor authorized to be made
assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, you must
deliver the defective product, to the nearest Authorized Dealer, along with proof-of-
purchase (invoice/receipt). KisanKraft Limited, its manufacturers and its dealers reserve
the right to inspect the claimed defective part(s) to determine if the malfunction is the result
of a defect covered by this warranty. Please note that the decision of KisanKraft Limited
with respect to any warranty claim is final.
After-sales Service (Including Warranty): KisanKraft Limited does not sell directly to
consumers. All sales or supplies are made through Authorized Dealers. It is the
responsibility of the Authorized Dealer to provide all after-sales service to consumers. Any
warranty claim should be raised by dealer to KisanKraft Limited as per warranty policy.
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Notes:
➢This purchase is not contingent upon a product demonstration. The purchaser shall
satisfy himself with the product, including any product demonstration or verification of
any function, before buying. KisanKraft Limited or its authorized dealers, including
online sellers, shall not be liable to give any on-site demonstration after purchase of
any of the product.
➢Any product once used will not be taken back by KisanKraft Limited.
➢Warranty and After Sale Services (including but not limited to installation,
Demonstration, Repair, Routine Maintenance etc.), should be done through the
Authorized Dealer selling this product.
➢Dealers should have their own technician to provide After Sales Services to their
Customers. KisanKraft Limited provides free training to Authorized Dealer’s
technicians at KisanKraft Limited’s head office, on request from Authorized Dealer.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 3 of 28
User Manual
KisanKraft Limited
Warehouse: 818 3B1 to 818 3B18, Podalakur - Sangam Road, Prabagiripatnam, Podalakur,
Nellore - 524345, Andhra Pradesh, INDIA
Head Office: Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli, HAF
Post, Hebbal, Bangalore 560024, Karnataka, INDIA

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 4 of 28
CONTENTS
BEFORE GETTING STARTED ........................................................................... 7
APPLICATION................................................................................................. 7
SAFETY INSTRUCTIONS.................................................................................. 7
OVERVIEW..................................................................................................... 9
Technical Specification................................................................................ 10
INSTALLATION AND ADJUSTMENT.............................................................. 11
OPERATION AND APPLICATION METHOD................................................... 12
OF INTERCULTIVATOR.................................................................................12
PART DIAGRAM........................................................................................... 21

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 5 of 28
Product
Agricultural
Inter-Cultivator
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-IC-6320
WARRANTY
PERIOD
6MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s Sign
Warranty Policy
What is covered: KisanKraft Limited and its manufacturers warrant this product to be free
from defects in material or workmanship. All parts defective in material and workmanship
are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its manufacturers
of such parts as appear to KisanKraft or its manufacturers, upon inspection, to be
defective in material and/or workmanship. KisanKraft or its manufacturers make no
warranty with respect to items not manufactured or sold by them. No onsite warranty is
provided by KisanKraft Limited or its manufacturers. Defective items must be brought/sent
to our Authorized Dealer or KisanKraft Limited’s office for service.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, norits authorized dealers assume any responsibility,
if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage, (6)
Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper set
up, adjustments, tampering or altered products (8) Any modification to the product what-
so-ever.
Important: (1) Normal maintenance and adjustments to the product is the responsibility
of the customer. (2) Normal wear and tear are not covered under warranty. (3)
Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, sparkplugs,
nylon line, air-filters, fuel-filters, oil seals and gaskets etc. are not covered under the
warranty. (4) Electrical Motor, Electrical Parts, Battery Etc. are not covered under the
warranty.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be liable
for general damages, including bodily injuries, or for incidental or consequential damages

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 6 of 28
including, but not limited to, loss of use, loss of profits, loss of production, expense of
substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations, or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranties hereunder, including,
but not limited to, any implied warranty of merchantability must be brought within the
applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft
Limited or any of its manufacturers has the authority to increase or alter the obligations of
this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended to
the first end user (original purchaser), and no warranty is made, nor authorized to be
made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, you must
deliver the defective product, to the nearest Authorized Dealer, along with proof-of-
purchase (invoice/receipt). KisanKraft Limited, its manufacturers and its dealers reserve
the right to inspect the claimed defective part(s) to determine if the malfunction is the
result of a defect covered by this warranty. Please note that the decision of KisanKraft
Limited with respect to any warranty claim is final.
After-sales Service (Including Warranty): KisanKraft Limited does not sell directly to
consumers. All sales or supplies are made through Authorized Dealers. It is the
responsibility ofthe Authorized Dealerto provide allafter-sales service to consumers. Any
warranty claim should be raised by dealer to KisanKraft Limited as per warranty policy.
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Notes:
➢This purchase is not contingent upon a product demonstration. The purchaser shall
satisfy himself with the product, including any product demonstration or verification
of any function, before buying. KisanKraft Limited or its authorized dealers, including
online sellers, shall not be liable to give any on-site demonstration after purchase of
any of the product.
➢Any product once used will not be taken back by KisanKraft Limited.
➢Warranty and After Sale Services (including but not limited to installation,
Demonstration, Repair, Routine Maintenance etc.), should be done through the
Authorized Dealer selling this product.
➢Dealers should have their own technician to provide After Sales Services to their
Customers. KisanKraft Limited provides free training to Authorized Dealer’s
technicians at KisanKraft Limited’s head office, on request from Authorized Dealer.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 7 of 28
BEFORE GETTING STARTED
Thank you for purchasing our Inter-cultivator.
•This manual can guide you to solve the problems when you are installing,
manipulating, and repairing the machine. With the continuous innovation and
improvement of theproducts, the contents inthe instruction manualmay differslightly
from the actual situations, your understanding and pardon is highly appreciated. If
you find some problems or have some good suggestions, please do not hesitate to
contact your dealer.
•No part of this publication may be reproduced without written permission.
•This manual should be considered a permanent part of the intercultivator and remain
with it if it is resold.
APPLICATION
This machine is small, lightweight, multi-functional, and with a high efficiency for
intercultural/weeding operations. It can climb hills, run in water, walk over the field ridges and
ditches, move freely, and change the directions easily, and it is especially applicable to various
works in hilly area, dry land, paddy field, orchard, vegetable garden and greenhouse, etc.
intercultural/weeding operations, ditching & ridging, and transport are the machine’s basic
functions. Moreover, after being equipped with relative devices and tools, it may be used to
pump water, spray water and pesticide, reap the crops, generate electricity, fertilizer, implant
seeds, threshing, cut tendrils, grind something, etc. The machine has a simple structure, can
be easily repaired and its fuel consumption is less. It is your ideal micro agricultural machine.
SAFETY INSTRUCTIONS
•Read the instructions carefully. Be familiar with the controls and the proper use of
the equipment.
•Never allow children or people unfamiliar with these instructions to use the machine.
•Never work while people, especially children, or pets are nearby.
•Operator or owner is responsible for accidents or hazards to other people or their
property.
Before starting the machine:
•Ensure sufficient engine oil.
•Press clutch during gear shifting.
•Load after idling the machine for 5 minutes.
•Close the choke for cold start
•Keep the choke half open for hot start.
•Before starting the machine, set shifting bar to the neutral position.
•When the machine is working, pay attention to the safety!
•Be careful not to be hurt by the rotary blades!
•While grasping the reverse handle, theshifting bar must be set to the neutral position.
•Fuel and lubricant must be clean.
•Clutch must be broken off when changing the shift.
•Please read the contents of nameplate on the handlebar carefully before using the
machine.
•Must install the safety protecting board on the machine before using machine or after
maintenance.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 8 of 28
•Muffler is a high
temperature spare part, do
not touch the Inter-
cultivator in work or out of
work freshly.
•When the Inter-cultivator is
working, keep an eye on
the rotary parts, do not be
too close to the machine to
avoid being hurt by the
rotary blades.
•Keep the components of
oil box away from fire and
smoke.
•Keep this machine stable
before use and read the
instruction carefully
•Please refuel on time
•Please pay attention to
warning signs

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 9 of 28
OVERVIEW
The product is mainly composed of petrol tank, gearbox, walking wheel,
Intercultivator, fender, and hand handle.
1: Throttle switch
6: Main frame
11: Fender
2: Two level filter
7: Walking wheel
12: Protective rack
3: Hand handle
8: Blade
13: Power
4: Throttle line
9: Knife seat
14: Flameout switch
5: Resistance rod
10: Transmission box

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 10 of 28
TECHNICAL SPECIFICATION
Serial
Number
Parameters
Unit
Details
Auxiliary Power
/
Single Cylinder Air
Cooling Two Strokes
2
Rated Power
Kw
1.95
3
Rated Speed
R/Min
9000 R/Min
4
Displacement
Cc
62
5
Ignition Mode
/
Cdi Contactless
6
Fuel
/
Petrol And Two Stroke Oil 25:1
7
Fuel Tank
Capacity
L
3.6l
8
Startup Mode
/
Recoil Starts
9
Machine Overall
Cm
61*49*59 Cm
Size
10
Transmission
Two Stage Gear Drive
Mode
11
Maximum
Mm
122.5
Rotation Radius
12
Number Of Totals
Handl
e
16 Pieces
Installation Knives
13
Net Structure
Kg
33
Quality
14
Plough Depth
Mm
100-180 (Sandy Soil)
15
Carburetor
/
Diaphragm
16
Weeding Depth
Cm
≥5
17
Weeding Width
Cm
30-35

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 11 of 28
Note: The two-stroke petrol engine is strictly prohibited from using pure petrol as fuel, the petrol
engine must use mixed oil, 90# or 92# petrol or the same brand of petrol and the two-stroke petrol
engine oil (JSAO-FC level and above) of the volume mixture ratio is 25:1
For four stroke petrol engines, please use 90# or 92# or above pure petrol.
INSTALLATION AND ADJUSTMENT
Assembly after the opening of box
•Handlebar installation: Putthe operator's hand onthemachine toadjust the screw hole
position and tighten the bolt.
•Installation of the control line of throttle line
▪Putting the switch on the throttle to the maximum.
▪The wire rope in the throttle line goes through the threading column andthe
fixed seat that above the adjusting plate of the engine throttle.
▪Tighten the wire rope and tighten the fixing screws on thefixing seat.
▪Repeatedly adjust the throttle switch.
•1.3 Installation of the extinguishing line: Connect the extinguishing line at
one end of the switch with the extinguishing line at the power end.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 12 of 28
OPERATION AND APPLICATION METHOD
OF INTERCULTIVATOR
Before starting:
•Check the Intercultivator in detail to ensure that the Intercultivator is in a safe state.
Especially the position of the rotary blade.
•It is necessary to maintain the distance between the Intercultivator and the refueling site
at 3 meters.
•Ensure that there are no spectators or other animals around. In particular, there must be
no people near the rotary knives.
•Pushing the flameout switch to the start position.
The refrigerator starts:
•Hold down the times of the carburetor oil pump until the fuel returns to the tubing that you
can see the obvious oil flow.
•Properly close the blocking door: Winter is completely closed, summer is part closes, the
heat engine is not closed, pulls the starter lightly for 4-6 times, then pull the starter's rope
hardly to start the engine.
•After the engine starts, then put the choke at the fully open position slowly.
•After the start of the idle running for 3-5 minutes to preheat the petrol engine, then slowly
increase the throttle to slowly raise the engine speed, at this time check whether the
rotary blade is running, whether the whole machine vibration is too large, or whether the
components of the screws are loose, normal work after everything is normal
•Hot machine start
•When the engine starts under the condition of heat engine, the door handle is placed in
the fully open position.
•When starting, such as excessive inhalation of fuel may cause difficulty in starting, if it is
advisable to lower the spark plug, and full open stop door wind starter forl0 times and
above, then install the spark plug and start according to the foregoing
•method.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 13 of 28
Operation of Intercultivator
•hold your hands tightly.If you wantto move thefarmingsite, youshould first stoptheengine,
and never allow your hand to grasp the rotary blade.
•After starting the machine, you must not touch the Intercultivator.
•All protection equipment, measures, andrandom beltofprotectiveequipment must be used
when working, only when the line is good and the line of sight is clear, the machine can be
used.
•Do not use this machine for a long time, which should have rest for 10-15 minutes every 50
minutes, in the operation of stone or hard objects, please immediately turn off the machine
and stick to the rotary knife.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 14 of 28
Fuel oil
•93# and above unleaded petrol and special two stroke oil or Mobil, the Great Wall are
agreed to mix for FC grade two stroke oil.
Petrol
1000
2000
3000
4000
5000
Two stroke oil
50
100
150
200
250
Running time of
Petrol: Oil
Running time of petrol
engine
Petrol: Oil
petrol engine
w<20hours
20:01
>20 hours
25:01:00
•Add fuel in a well-ventilated area and shop the petrol
engine when it comes to petrol. Do not add too much
oil to the pot. The fuel v0lume is 80% 0t v0lume of the
•If the fuel is overflow or spilled, it must be thoroughly
clear and clean, and ensure that the Oil b0ttle cap is
screwed tightly before starting the petrol engine.
•Check the air filter, pr0hibit the 0perati0n of petrol
engine without air filter or air filter sponge filter,
otherwise it will accelerate the wear of petrol engine.
•Fresh gas0line must be used, and petrol cannot be
stored for more than 30 days Mixed fuel stored for more than 30 days will cause the
carburetor to obstruct and the machine cannot be
used normally.
•Petrol engine plus fuel or fuel storage, smoking is
strictly prohibited. Carburetor, bearing and oil sed of
the petrol engine.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 15 of 28
Starting method
1. Adding proper amount ofmixed fuel inthe oil potand tighten the lidof the oil pot to make it
completely impervious.
2. Pushing the switch off in the direction of "STOP" to make it open (Figure Fl-1)
3. Continue topressthecarburetor oilbubbles continuously by hand, and return thefuel to
theoilpotuntilthereturnpipe(transparent tubing)(asshowninFig.F1-2).
4. Pressing the choke to the full closed position (as shown in figureF1-3).
5. Holding the proper position of the petrol engine with one hand tightly, the other
hand holds the starting handle tightly, and pull rope for 3-5 times quickly and
continuously.Ifitcanstart,itwillstartthepullropeautomaticallyandslowlyback
to the site. If it can't start, the damper door is turned back to 1/2 open or full,
and then pull the rope smoothly and continuous for 3-5 times to start up (as
shown in figure Fl-4).

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 16 of 28
Easy start device: Fast and continuous oblique balanced position can be activated by starting the
handle. When you return, hold the starting handle tightly so thatthepull ropecanbeautomatically and
evenlyreturnedtotheoriginalposition. Do not suddenly let go, so as not tostart the handle to rebound
quickly, which may cause damage to the boot assembly.
Note:
When thestart is not at thattime,if the cylinder inhale too much fuel will cause the phenomenon of
floodingand it cannot start, youcangodown thespark plugwith the thumb of the left hand to hold the
spark plug hole, pull the starter for 5-6 times continuouslytodischargetheoil,theninstallthespark
plug,andoperateaccordingto the correct starting method
Attention: strictly prohibit the use of pure petrol as fuel, pure petrol will cause overheating of petrol
engine and damage.
Pay special attention to:
Nofirework isprohibitedinhandling, refueling,orstoringfuel,anditcanonlybe mixed and stored in
qualified petrol containers.
Most petrol engine failures are directly or indirectly caused by fuel contracts.
Adjustment of petrol engine
Every petrol engine mustundergo strict commissioning andinspection before going out of factory.
Climateconditionsoraltitudedifferencesmayaffecttheperformanceofpetrol engines, according to the
actual use of minor adjustments.
1. The adjustment of the gap between the magnetic flywheel (F2-1)
The gap between the magnetic flywheel and the high-pressure package should be between
0.25=0.4mmm. If it is not in this range, you can loosen two M5*25-cylinder screws and replaced by a
0.25=0.4mm tape or a coke bottle between the magnetic flywheel and the high-pressure package,
and the high-pressure package can be adjusted to ensure the gap at 0.25= 0.4mmm and tighten two
screws.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 17 of 28
2. Spark plug (F2-2)
•After 50 hours of use, the spark plug should be removed. Carbon brush or wire brush will be
used to clean the carbon or dirt of the spark plug on the electrode. The spark plug gap should
be guaranteed to be between 0.6=0.7mm.
•The spark plug should be cleaned or replaced every 100 hours or every quarter to ensure the
performance of the spark plug.
•Do not sandblast clean the spark plugs, use carbon brush, or wire brush to clean or remove
the carbon solvent. If the cap spring is not fully installed in the spark plug, the spark may not
appear. If necessary, the connection of the wire can be corrected. Please use the
manufacturer to specify the brand.
•When installing the spark plug, turn it with your hand first and tighten it with the special socket
wrench of spark plug. (If the force is too high, the cylinder and spark plug will be damaged. If
the screw force is too small, there will be air leakage). The torque is 15.3=22.4N*m

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 18 of 28
•The regulation of the carburetor (F2-3/F2-4)
Before adjusting the carburetor, the air filter and fuel
filter must be cleaned. The petrol engine needs to be
preheated for 5-10 minutes.
Idle speed adjustment screw: This screw is used to
adjust the petrol engine after stating the door for the
drive mechanism does not work. When the engine
speed the right (clockwise direction) twisting, the speed
will rise, when it turns the left (counterclockwise) twist,
the speed will drop. It is necessary to correct Use the
manufacturer to make the brand when replacing it.
Adjust the speed range: Petrol engine idle speed:
3000-3300r/min that the
Petrol engine is easy to start, if it does not extinguish,
the transmission mechanism is not working

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 19 of 28
•The idle speed of each petrol engine is strictly adjusted
by technical personnel without repeated operation.
The idle screw is designed to ensure that the petrol
engine has enough safety distance during the idle
operation and when the clutch is combined
Mixing ratio adjusting screw: The screw is used to
adjust the speed of a
petrol engine when the petrol engine is running at no
load, and it can operate at a higher performance.

KisanKraft®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-6320
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 20 of 28
Adjustment method: When it is in the idle state, the petrol engine uses one
Word screwdriver to turn the mixing ratio screw to the right, which twists it to the end.
andthen goes back tothe left spin for 2. 5circles, then the throttle isfully opened and the 1/8
circle is adjusted to 880fi9200r/min.
If there is no tachometer, you can listen to the sound of petrol
engine at no load and high speed, its voice cannot whistle, be dull
and smooth.
The no load and high speed of every petrol engine is strictly adjusted by technicians, and no
repetitive operation is required.
1. Idle speed adjusting screw
2. Mixing ratio adjusting screw
3. Petrol engine
Different climate conditions or altitude will affect the carburetor. If you debug the
carburetor, you need to adjust it under the guidance of professionals.
Notice:
When the carburetor is adjusted, the drill must be removed to avoid accidents.