KISANKRAFT KK-PPD-E62 User manual

KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 1 of 28
Product
Horticulture Plant Pit
Digger
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-PPDE-62
WARRANTY
PERIOD
6MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products

KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 2 of 28
Important: (1) Normal maintenance and adjustments to the product is the responsibility
of the customer. (2) Normal wear and tear is not covered under warranty
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, spark-
plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranties hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended to
the first end user (original purchaser), and no warranty is made, nor authorized to be
made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, deliver
the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction is the result of a defect covered by this warranty. Please
note that the decision of KisanKraft Limited with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools 
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines 

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 3 of 28
User Manual
KisanKraft Limited
(Formerly known as KisanKraft Machine Tools Pvt. Ltd)
Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli,
HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA
♦Bangalore (HO) ♦Ahmedabad ♦Bhopal ♦Bhubaneswar ♦Coimbatore ♦
♦Guwahati ♦Patna ♦Hinudpur ♦Hubli ♦Hyderabad ♦Jaipur ♦Karnal ♦
♦Kolkata ♦Lucknow ♦Nagpur ♦Pune ♦Raipur ♦Shimla ♦

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 4 of 28

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 5 of 28
CONTENTS
Before Getting Started..............................................................................8
Symbols on the Machine...........................................................................8
For Safe Operation..................................................................................10
Parts Overview .......................................................................................17
Operation ...............................................................................................17
Technical Specifications ..........................................................................20
Maintenance...........................................................................................21
Storage ...................................................................................................23
Troubleshooting......................................................................................24

KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 6 of 28
Product
Horticulture Plant
Pit Digger
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-PPDE-62
WARRANTY
PERIOD
6MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical
damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7)
Improper set up, adjustments, tampering or altered products.

KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 7 of 28
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under
warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under
the warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not
be liable for general damages, including bodily injuries, or for incidental or
consequential damages including, but not limited to, loss of use, loss of profits,
loss of production, expense of substitute equipment or other commercial loss or
damage.
Limitation of Liability: This limited warranty is in lieu of all other express
warranties, obligations, or liabilities. Any implied warranties, obligations or
liabilities, including, but not limited to, any implied warranty of merchantability shall
be limited in duration to the applicable warranty period. Any action for breach of
any warranty hereunder, including, but not limited to, any implied warranty of
merchantability must be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter
the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall
not transfer if the product is resold by the first buyer. The above warranties are
extended to the first end user (original purchaser), and no warranty is made, nor
authorized to be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance
of any obligation under this warranty for failure during the applicable warranty
period, deliver the defective product, to the nearest Authorized Dealer. KisanKraft
Limited, its manufacturers and its dealers reserve the right to inspect the claimed
defective part(s) to determine if the malfunction is the result of a defect covered by
this warranty. Please note that the decision of KisanKraft Limited with respect to
any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools 
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines 

KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 8 of 28
Before Getting Started
We wish to thank you for choosing our Plantation Pit Diggers. We are confident that the
high quality of our machine will meet your requirement and satisfaction and that your pit
digger will give you long-lasting service. Before starting to use your machine, make sure
to read this manual carefully, which has been purposely drawn up to provide you with all
the necessary information for proper use, in compliance with basic safety requirements.
SAFETY FIRST
Instructions contained in warnings within this manual marked
with a symbol concern critical points which must be taken
into consideration to prevent possible serious bodily injury, and
for this reason you are requested to read all such instructions
carefully and follow them without fail.
This mark indicates instructions which must be followed in
order to prevent accidents which could lead to serious bodily
injury or death.
This mark indicates instructions which must be followed, or it
leads to mechanical failure, breakdown, or damage.
This mark indicates hints or directions useful in the use of the
product.
Symbols on the Machine
For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to make a mistake.
For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to make a mistake.
CHOKE OPERATION
Starting mode when the engine is hot (choke off).
Position: AIR CLEANER COVER
Starting mode when the engine is cold (choke on).
Position: AIR CLEANER COVER

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 9 of 28
Warning labels on the machine
WARNING!
Don’t work
during rain.
Improper
Condition Can
Don’t smoke or
allow flames on
the machine
Cause Serious
Injury
Danger of hot
components
Read the
instruction
manual
completely and
carefully before
using the power
tool.
With this symbol
the manufacturer
confirms that this
tool is in
accordance with
applicable
European
directives.
Wear hearing
protection!
The guaranteed
noise level
Wear safety
glasses!
With this symbol
the manufacturer
confirms that this
tool is in
accordance with
applicable
European
directives
IMPORTANT
If warning label peel off or become soiled and impossible to read, you should contact
the dealer from which you purchased the product to order new labels and affix them in
the required location(s).
WARNING
Never modify your product. We won't warrant the machine, if you use the remodeled
brush cutter or you don't observe the proper usage written in the manual.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 10 of 28
For Safe Operation
1. Read this manual carefully until you completely
understand and follow all safety and operating
instructions.
2. Keep this manual handy so that you may refer to it
later whenever any questions arise. Also note, if you
have any questions which cannot be answered
herein, contact the dealer from whom you
purchased the product.
3. Always be sure to include this manual when selling,
lending, or otherwise transferring the ownership of
this product.
4. Never allow children or anyone unable to fully
understand the directions given in the manual to
use the machine.
WORKING CONDITION:
1. When using the product, you should wear proper
clothing and protective equipment.
(1) Helmet
(2) Ear protectors
(3) Protection goggles or face protector
(4) Thick work gloves
(5) Non-slip-sole work boots
2. And you should carry with you.
(1) Attached tools and files
(2) Properly reserved fuel
(3) Spare blade
(4) Things to notify your working area (rope,
warning signs)
(5) Whistle (for collaboration or emergency)
(6) Hatchet or saw (for removal of obstacles)
3. Do not wear loose clothing, jewelry, short
trousers, sandals, or go barefoot. Do not wear
anything which might be caught by a moving part of
the unit. Secure hair so it is above shoulder length

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 11 of 28
WORKING CIRCUMSTANCE:
1. Never start the engine inside a closed room or
building. Exhaust gases contain dangerous carbon
monoxide.
2. Never use the product,
a. when the ground is slippery or when you can’t
maintain a steady posture.
b. At night, at times of heavy fog, or at any other times
when your field of vision might be limited and it would
be difficult to gain a clear view of the working area.
c. During rain storms, during lightning storms, at times
of strong or gale-force winds, or at any other times
when weather conditions might make it unsafe to use
the product.
WORKING PLAN
1. You should never use the product when under the
influence of alcohol, when suffering from exhaustion
or lack of sleep, when suffering from drowsiness as a
result of having taken cold medicine or at any other
time when a possibility exists that your judgment might
be impaired or that you might not be able to operate
the product properly and in a safe manner.
2. When planning your work schedule, allow plenty of
time to rest. Limit the amount of time over which the
product is to be used continuously to somewhere
around 30~40 minutes per session, and take 10~20
minutes of rest between work sessions. Also try to
keep the total amount of work performed in a single
day under 2 hours or less.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 12 of 28
WARNING
1. If you don’t observe the working time, or
working manner (See ■ USING THE
PRODUCT), Repetitive Stress Injury (RSI)
could occur. If you feel discomfort, redness and
swelling of your fingers or any other part of your
body, see a doctor before getting worse.
2. To avoid noise complaints, in general, operate
product between 8a.m. and 5p.m. on weekdays
and 9a.m. to 5p.m.weekends.
Check and follow the local regulations as
to sound level and hours of operations for the product.
BEFORE STARTING THE ENGINE
1. The area within a perimeter of 50 feet (15m) of
the person using the product should be
considered a hazardous area into which no one
should enter. If necessary, yellow warning rope,
warning signs should be placed around the
perimeter of the area. When work is to be
performed simultaneously by two or more
persons, care should also be taken to
constantly look around or otherwise check for
the presence and locations of other people
working so as to maintain a distance between
each person sufficient to ensure safety.
2. 2. Check the condition of working area to avoid
any accident by hitting hidden obstacles such
as stumps, stones, cans, or broken grass.
IMPORTANT
Remove any obstacle before beginning work.
3. Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the
driller is properly installed and securely fastened.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 13 of 28
STARTING THE ENGINE:
1. Keep bystanders and animals at least 50feet
(15m) away from the operating point. If you
are approached, immediately stop the
engine.
2. The product is equipped with a centrifugal
clutch mechanism, so the driller begins to
rotate as soon as the engine is started by
putting the throttle into the start position.
When starting the engine, place the product
onto the ground in a flat clear area and hold
it firmly in place so as to ensure that neither
the driller nor the throttle come into contact
with any obstacle when the engine starts.
WARNING
Never place the throttle into the high speed position when starting the engine.
3. After starting the engine, check to make sure that the cutting attachment stops
rotating when the throttle is moved fully back to its original position. If it continues
to rotate even after the throttle has been moved fully back, turn off the engine and
take the unit to your authorized servicing dealer for repair.
USING THE PRODUCT
IMPORTANT
Drill only materials recommended by the manufacturer. And use only for tasks
explained in the manual.
1. Grip the handles firmly with both hands using
your whole hand. Place your feet slightly apart
(slightly further apart than the width of your
shoulders) so that your weight is distributed
evenly across both legs, and always be sure to
maintain a steady, even posture while working.
2. Maintain the speed of the engine at the level
required to perform drilling work, and never raise
the speed of the engine above the level
necessary.
3. If the unit start to shake or vibrate, turn off the
engine and check the whole unit. Do not use it
until the trouble has been properly corrected.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 14 of 28
4. Keep all parts of your body away from rotating
cutting attachment and hot surfaces.
5. Never touch the muffler, spark plug, or other
metallic parts of the engine while the engine is in
operation or immediately after shutting down the
engine. Doing so could result in serious burns or
electrical shock.
IF SOMEONE COMES
1. Guard against hazardous situations at all
times. Warn adults to keep pets and children
away from the area. Be careful if you are
approached. Injury may result from flying
debris.
2. If someone calls out or otherwise interrupts
you while working, always be sure to turn off
the engine before turning around.
MAINTENANCE
1. In order to maintain your product in proper
working order, perform the maintenance and
checking operations described in the
manual at regular intervals.
2. Always be sure to turn off the engine before
performing any maintenance or checking
procedures.
WARNING
The metallic parts reach high temperatures
immediately after stopping the engine.
3. Under no circumstances should you ever
take apart the product or alter it in any
way. Doing so might result in the product
becoming damaged during operation or the
product becoming unable to operate
properly.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 15 of 28
HANDLING FUEL:
1. The engine of the product is designed to run on
a mixed fuel which contains highly flammable
petrol. Never store cans of fuel or refill the tank
of the unit in any place where there is a boiler,
stove, wood fire, electrical sparks, welding
sparks, or any other source of heat or fire which
might ignite the fuel.
2. Never smoke while operating the unit or refilling
its fuel tank.
3. When refilling the tank, always turn off the
engine and allow it to cool down. Take a careful
look around to make sure that there are no
sparks or open flames anywhere nearby before
refueling.
4. Wipe spilled fuel completely using a dry rag if
any fuel spillage occurs during refueling.
5. After refueling, screw the fuel cap back tightly
onto the fuel tank and then carry the unit to a
spot 10feet (3m) or more away from where it
was refueled before turning on the engine.
TRANSPORTATION:
1. When hand-carrying the product, cover over the cutting part if necessary, lift
up the product and carry it paying attention to the blade.
2. Never transport the product over rough roads over long distances by vehicle
without removing all fuel from the fuel tank. If doing so, fuel might leak from
the tank during transport.
WARNING
•Petrol is very flammable. Avoid smoking or bringing any
flame or sparks near fuel.
•Wipe up all spills before starting the engine.
•Make sure to stop the engine and allow it cool before
refueling the unit.
•Keep open flames away from the area where fuel is
handled or stored.
IMPORTANT
•Never use oil for 4 cycle engine use or water cooled 2-cycle engine.
•Never use "FUEL WITH NO OIL (RAW PETROL)".
•Never use fuel laced with water.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 16 of 28
•Mixed fuels which have been left unused for a period of one month or more
may clog the carburetor or result in the engine failing to operate properly. Put
remained fuel into an air-tight container and keep it in the dark and cool room.
•Please ask for “mixed petrol for air-cooled 2-cycle engines” at your nearest
gas station, or use fuel made by putting unleaded petrol for automobiles and
air-cooled 2-cycle engine oil into a mixing container in accordance with the
following ratios and then shaking to mix well.
HOW TO MIX FUEL:
1. Measure out the quantities of petrol and oil to
be mixed.
2. Put some of the petrol into the clean,
approved fuel container supplied.
3. Pour in the oil and agitate well.
4. Be careful that, if the agitation is insufficient,
there is an increased danger of early piston
seizing due to abnormally lean mixture.
Note: When using commercially available 2-cycle oil (FB grade):
25:1 (160 ml of oil for every 4 liters of petrol)
FUELING THE UNIT:
1. Untwist and remove the fuel cap. Rest the cap on a dustless place.
2. Pour fuel into the fuel tank to 80% of the full capacity.
3. Fasten the fuel cap securely and wipe up any fuel spillage around the unit.
WARNING
1. Select bare ground for fueling.
2. Move at least 10ft (3m) away from the fueling point before starting the engine.
3. Stop the engine before refueling the unit. At that time, be sure to sufficiently
agitate the mixed petrol in the container.
4. In the case of storing the product for a long period of time, clean the fuel tank
after rendering it empty. Next, activate the engine and empty the carburetor of
the composite fuel.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 17 of 28
Parts Overview
1. Right Grip
2. Left Grip
3. Fuel Tank
4. Gear transmission
5. Driller (optional)
6. ON/OFF Switch
7. Recoil Stater
Operation
INSTALLING DRILLER
1. Put the driller (2) onto the drive
shaft (1) of the auger.
2. Secure the driller (2) with the screw
(3) and the nut (4), tighten them.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 18 of 28
STARTING ENGINE
WARNING
The driller will start rotating upon the engine starts.
1. Feed fuel into the fuel tank and tighten
the cap securely.
2. Rest the unit on a flat, firm place. Keep
the driller off the ground and clear of
surrounding objects as it will start rotating
upon starting of the engine.
3. Push the primer pump several times until
overflown fuel flows out in the return
tube.
4. Move the choke lever to the OFF
position.
5. Set the ignition switch to the “ON”
position.
6. Place the unit on a flat, firm place. While
holding the unit firmly, pull out the starter
rope quickly until engine fires
IMPORTANT
Avoid pulling the rope to its end or returning it
by releasing the knob. Such actions can
cause starter failures.
7. Move the choke lever to the ON
position. And pull out the starter rope
quickly to restart engine.
8. Allow the engine to warm up for several
minutes before starting operation.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 19 of 28
1. When restarting the engine immediately after stopping it, leave the choke at
ON position.
2. Over choking can make the engine hard to start due to excess fuel. When the
engine failed to start after several attempts, open the choke and repeat pulling
the rope, or remove the spark plug and dry it.
STOPPING ENGINE
1. Release the throttle lever and
run the engine for a half
minute.
2. Shift the ignition switch to the
OFF position
Except for an emergency, avoid stopping
the engine while pulling the throttle lever.
ADJUSTING IDLING SPEED
(1) Idle speed adjuster
1. When the engine tends stop frequently at
idling mode, turn the adjusting screw
clockwise.
2. When the cutting head keeps rotating after
releasing the trigger, turn the adjusting screw.
Warm up the engine before adjusting the idling
speed.
DRILLING
•Keep a firm grip of the auger at all times on a
wide stance and by holding the handle with
both hands.
•A reacting motion may occur on the auger
when spinning driller has hit on stones or tree
roots under the ground. Always hold the auger
securely to control such motion.
•Start drilling with half-throttle, and gradually
increase the engine speed so that the driller
may get into the ground smoothly.
••When the drill has been caught in the ground
and cannot be pulled out, stop the engine and
rotate the auger counter-clockwise.

KisanKraft®
Horticulture Plant Pit Digger
KK-PPD-E62
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 20 of 28
Technical Specifications
Engine type
Air-cooled, 2-stroke
Engine displacement
62 cc
Maximum engine power
2.0kW
Engine Max speed
10000 rpm-1
Engine idling speed
3000±300 rpm-1
Fuel Mixture
Petrol 25 : Oil 1
Volume of fuel tank
1.2 L
Starter
Recoil
Carburetor
Diaphragm type
Weight(without driller and petrol)
9.0 kg
Tested sound pressure level, LPA (2000/14/EC)
LPA: 107.7 dB(A), k=3 dB(A)
Guaranteed sound power level, LWA
(2000/14/EC)
LWA: 113 dB(A), k=3 dB(A)
Vibration level
21.206m/s2, K=1.5 m/s2
Max driller speed
300 rpm-1
Driller size
(φ 60~φ 300)MM*80CM
Standard Driller
φ 100MM, φ 150MM, φ 200MM
Gear box lubricant
Gear oil SAE#80-90
Note:Specifications are subject to change without prior notice.