KitchenAid 5KSM3310X User manual

W11456991A
STAND MIXER
5KSM3310X, 5KSM3311X
PRODUCT GUIDE

2
PARTS AND FEATURES
5
7
6
4
3
2
1
9
8
10 11
12
13
1. Bowl Clamping Plate
2. Beater Height Adjustment Screw (not
shown)
3. Speed Control Lever
4. Motor Head
5. Attachment Hub
6. Attachment Knob
7. Motor Head (locking lever not shown)
8. Beater Shaft
9. Bowl
10. Flat Beater
11. Flex Edge Beater*
12. Wire Whip
13. Dough Hook
*Accessory sold separately.

EN
3
PRODUCT SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
DANGER You can be killed or seriously injured
if you don't immediately follow
instructions.
WARNING You can be killed or seriously injured
if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce
the chance of injury, and tell you what can happen if the instructions are not
followed.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions. Misuse of appliance may result in
personal injury.
2. To protect against risk of electrical shock, do not put Stand
Mixer in water or other liquid.
3. European Union only: This appliance shall not be used by
children. Keep the appliance and its cord out of reach of
children.
4. European Union only: Appliances can be used by persons with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way
and understand the hazards involved.

4
5. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
6. Children should be supervised to ensure that they do not play
with the appliance.
7. Turn the appliance off (0), then unplug from the outlet when not
in use, before assembling or disassembling parts, and before
cleaning. To unplug, grasp the plug and pull from the outlet.
Never pull from the power cord.
8. Avoid contacting moving parts. Keep hands, hair, and clothing,
as well as spatulas and other utensils, away from beater during
operation to reduce the risk of injury to persons and/or damage
to the Stand Mixer.
9. Do not operate any appliance with a damaged cord or plug, or
after the appliance malfunctions, or is dropped or damaged in
any manner. Return appliance to the nearest Authorised
Service Facility for examination, repair, or electrical or
mechanical adjustment.
10. If the supply cord is damaged, it must be replaced by
KitchenAid, its service agent or similarly qualified persons in
order to avoid a hazard.
11. The use of accessories/attachments not recommended or sold
by KitchenAid may cause fire, electric shock or injury to
persons.
12. Do not use the appliance outdoors.
13. Do not let the cord hang over the edge of table or counter.
14. Remove Flat Beater, Flex Edge Beater, Wire Whip, or Dough
Hook from Stand Mixer before washing.
15. Never leave the appliance unattended while it is in operation.
16. Allow the appliance to cool completely before putting on or
taking off parts, and before cleaning the appliance.
17. To avoid product damage, do not use the Stand Mixer Bowls in
areas of high heat such as an oven, microwave, or on a
stovetop.
18. Refer to the “Care and Cleaning” section for instructions on
cleaning the surfaces in contact with food.

EN
5
19. This appliance is intended to be used in household and similar
applications such as:
�staff kitchen areas in shops, offices and other working
environments;
�farmhouses;
�by clients in hotels, motels and other residential type
environments;
�bed and breakfast type environments.
SAVE THESE INSTRUCTIONS
NOTE:Refer to the “Speed Control Guide” section for maximum speed per preparation and
the “Product Usage” section for the maximum amount of ingredients.
For complete details on product information, instructions and
videos, including Guarantee information, visit
www.kitchenaid.co.uk/product-tips,
www.kitchenaid.ie/product-tips, or www.KitchenAid.eu.
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Voltage: 220-240 V
Frequency: 50-60 Hz
Power: 250 W
NOTE: The power rating for your Stand Mixer is printed on the serial plate.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician
or service technician install an outlet near the appliance.
The maximum rating is based on the attachment that draws the greatest load (power). Other
recommended attachments may draw significantly less power.

6
SPEED CONTROL GUIDE
All speeds have the Soft Start feature, which automatically starts the Stand Mixer at a lower
speed to help avoid ingredient splash-out and “flour puff” at start-up, then quickly increases to
the selected speed for optimal performance.
SPEE-
DACCESSO-
RIES AC- TION DESCRIPTION
1/2 Flat Beater,
Flex Edge
Beater*
Stir
For slow stirring, combining, mashing, starting all mixing
procedures. Use to add flour and dry ingredients to
batter and to add liquids to dry ingredients. Do not use
Speed 1 to mix or knead yeast doughs.
1
2Flat Beater,
Dough Hook Slow
mixing
For slow mixing, mashing, faster stirring. Use to mix and
knead yeast doughs, heavy batters and candies, start
mashing potatoes or other vegetables, cut shortening
into flour, or mix thin or splashy batters.
4
Flex Edge
Beater*,
Wire Whip
Mixing,
beat-
ing
For mixing semi-heavy batters, such as cookies. Use to
cream sugar and shortening and to add sugar to egg
whites for meringues. Medium speed for cake mixes.
Use with attachments: Food Grinder, Fresh Prep Slicer/
Shredder and Fruit/ Vegetable Strainer.
6Flat Beater,
Wire Whip
Beat-
ing,
cream-
ing
For medium fast beating (creaming) or whipping. Use to
finish mixing cake, doughnut, and other batters. High
speed for cake mixes. Use with Citrus Juicer attachment.
8Wire Whip
Fast
beat-
ing,
whip-
ping
For whipping cream, egg whites, and boiled frostings.
10 Wire Whip Fast
whip-
ping
For whipping small amounts of cream and egg whites.
Use with Pasta Maker and Grain Mill attachments.
NOTE: The speed control can be set to obtain speeds 1, 3, 5, 7, and 9 if a finer adjustment is
required. Do not exceed Speed 2 when preparing yeast doughs as this may cause damage to
the Stand Mixer.
NOTE: Refer to “Product Usage” section for maximum advised quantities per Food Type.
*Accessory sold separately.

EN
7
ACCESSORY GUIDE
ACCESSO-
RIES USE TO MIX SUGGESTED ITEMS
Flat Beater, Flex
Edge Beater*
Normal to heavy
mixtures
Cakes, creamed frostings, candies, cookies,
biscuits, pie pastry, meatloaf, mashed potatoes.
Wire Whip Mixtures that need air
incorporated
Eggs, egg whites, heavy cream, boiled frostings,
sponge cakes, mayonnaise, some candies.
Dough Hook Mixing and kneading yeast
doughs Breads, rolls, pizza dough, buns, coffee cakes.
PRODUCT ASSEMBLY
1. Turn the Stand Mixer off (0) and then unplug.
2. Unlock and lift the Motor Head. Then, lock** the head to keep it lifted.
*Accessory sold separately.
**Locking option is available on select models.

8
3. Place the Bowl on the Clamping Plate and twist clockwise to lock in place.
4. With the Motor Head lifted and locked, slide the accessory over the shaft, aligning with the
pin, then rotate clockwise to hook it over the pin on the shaft.
1
2

EN
9
5. Unlock the Motor Head and move it down. Then, lock** the head to keep it down. Before
mixing, test lock** by attempting to raise the Motor Head.
1
2
(OPTIONAL) To Adjust Beater to Bowl Clearance: Tilt and lock** the Motor Head back.
Locate the screw revealed under the Motor Head. Turn the screw slightly counterclockwise
(left) to raise the beater, or clockwise (right) to lower it.
1
2
NOTE: When properly adjusted, the Flat Beater will not strike on the bottom or side of the
Bowl. If the Flat Beater or the Wire Whip is so close that it strikes the bottom of the Bowl,
the beater or whip may wear.
NOTE: If you over-adjust the screw, the bowl lock lever may not lock into place.
**Locking option is available on select models.

10
PRODUCT USAGE
WARNING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
1. Plug it into an earthed outlet. Start with lower speed to avoid splashing and increase it
gradually. Refer to the “Speed Control Guide”.
1
2