Knight Agile Boost Desk User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Agile Boost Desk

Page 1
Assembly Instructions
knightgroup.co.nz
Agile Boost Desk
Parts:
Tools:
1x LEFT LEG
10x M6x12 8x M8x20 10x ST5.0x23*3x ST4.0x161x CONTROLLER1x POWER CORD 1x CABLE
1x RIGHT LEG 1x LONG TUBE 2x SIDE FRAME 1x HEX BAR 2x BASE
3x HEX KEYS
M2.5 M4 M5
• To prevent possible scratches or damage, assemble the product
on a soft surface such as a blanket, carpet or packaging.
Recommended
2-person Step
DESK TECHNICAL DATA
• Height Range: 705 - 1155mm (Height measurements includes worktop)
• Speed: 22mm/s
• Max Static Load Weight: 80kg
• Input Voltage: 100-240V
• Duty Cycle: 10% MAX 1min on 9min off
*Supplied when purchased with worktop.
10x M6x12

Page 2
Assembly Instructions
knightgroup.co.nz
Page 2
Assembly Instructions
Step 1
Step 2
Agile Boost Desk
Loosen screws in long tube and adjust length, fix left and right end of long tube to legs using M6x10
and M4 hex key.
M4
4x M6x12
Attach side frames to left and right leg using M6x10 screws and M4 hex key.
M5
M4
Loosen
M5
M5
Loosen
6x M6x12

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Step 3
Step 4
Agile Boost Desk
Loosen grub screws on hex bar and insert from A, adjust the length and connect other end to B.
8x M8x20
M5
Fix bases to left and right legs using M8x20 screws and M5 hex key.
Loosen
M2.5
A
B

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
10x M6x12
Step 5
Step 6
Agile Boost Desk
Adjust long tube and hex bar length to suit worktop, then fix worktop to frame using ST5.0x23 wood screws.
Tighten
M2.5
M5
Tighten
Tighten long tube screws and hex bar grub screws.
10x ST5.0x23

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Step 7
Completed
Agile Boost Desk
3x ST4.0x16
Attach handset with ST4.2x16 on right hand side and connect cables.

Page 6
Assembly Instructions
knightgroup.co.nz
Page 6
Assembly Instructions
Please carefully read the assembly manual and direction for use
prior to installment, use and maintenance of the table frame to
gain a complete understanding of its contents. It provides you
with important information about the safety, use, installation and
maintenance of the table.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY,
SAFETY AND OPERATION INSTRUCTIONS REGARDING THE USE OF
THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
SAFETY
• The table must be used in a safe manner. Inappropriate use may
cause damage to the table and/or cause bodily harm to the user
or persons nearby.
• Do not tamper with electrical components as this may lead to
serious bodily harm.
• Only connect the electric table frames to the prescribed mains
power voltage
• Do not use the table frame to lift people.
• Retain this operation manual & pass it on to any future owner.
USAGE
• The height-adjustable table is designed for use in dry work
environments only.
• Table is height adjustable so that it can be set to the user’s most
ergonomic working height. The user should seek professional help
to establish their optimum working height.
• The table has been designed as a devise to elevate the users
work surface and associated office peripherals. Do not use the
table frame for any other purposes than that which it has been
designed for. Any other use is at user’s own risk!
• Do not crawl, lie or move around under the table frame, and do
not sit or stand on the table frame.
• CHILDREN should only use the table when supervised by adults.
• In the event of the occurrence of jarring sounds during operation,
STOP using the table and please contact the dealer.
• Liability: The manufacturer accepts under no circumstances
warranty claims or liability claims for damages arising from
improper use or handling of the table frame other than that
described in this operation manual.
SET UP AND INSTALLATION
• Assemble the table frame according to the assembly instructions.
• Place the table in a safe distance from window frames, radiators,
furniture etc. so that persons cannot become trapped.
• Level the table with the adjustable feet ensuring that the table is
stable.
• Check that no cables can get jammed.
• Connect the table to the 110 or 230 VAC power outlet.
• The table is now ready for use.
Important
Agile Boost Desk

Page 7
Assembly Instructions
knightgroup.co.nz
Page 7
Assembly Instructions
Handset Manual - Upgrade
Agile Boost Desk
Display
screen
Memory
button
Up & down
button
OPERATION
• Display screen - Shows current height of desk
• Up & down button - Push button to adjust desk height until
you reach optimum height.
• Memory button - After setting memory desk height will
auto adjust to the chosen setting.
• How to set memory key - Adjust desk to preferred height
using up & down button. Push a memory button (M1/M2/M3/M4)
for 5 seconds until you hear a beep to save setting.
ADDITIONAL SETTINGS
Press down M4 until you hear a second beep.
Use the up and down buttons to navigate menu then press
M4 button to make your selection.
A = Sensitivity of downwards anti collision
Up & down keys to navigate to selection
1 - High sensitivity
2 - Standard sensitivity
3 - Low sensitivity
4 - Off
Press M3 to make selection.
Press M3 again to save selection and return home screen.
B = CM or IN display
Up & down keys to navigate to selection
1 - CM
2 - IN
Press M3 to make selection.
Press M3 again to save selection and return home screen.
C = Basic height setting
Up & down keys to adjust height
Press M3 to make selection.
Press M3 again to save selection and return home screen.
D = Minimum height setting
Up & down keys to adjust height
Press M3 to make selection.
Press M3 again to save selection and return home screen.
E = Maximum height setting
Up & down keys to adjust height
Press M3 to make selection.
Press M3 again to save selection and return home screen.
F = Sensitivity of upwards anti collision
Up & down keys to navigate to selection
1 - High sensitivity
2 - Standard sensitivity
3 - Low sensitivity
4 - Off
Press M3 to make selection.
Press M3 again to save selection and return home screen.
ERROR CODES
ER1 = Motor stop
Power off and restart. If fault still exists there is a motor problem.
ER5 = Overload protection
There is too much weight on desk. Lighten load, power off and restart.
Hot = Overload power protection
Will auto recover after 5 min. If fault still exists power off and restart.
TIPS
• Locked handset
Handset locks automatically after 30 seconds of no use.
To unlock handset touch up or down key.
• To move the desk
Desk must be set on the lowest height to release castors for
moving the desk. Be sure to remove items that could be damaged
if they fall before moving the desk.