KOBLE Hedda User manual

Hedda Chair
Hedda Chair
DCHEDDA
Issue 1-15/08/23

Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Parts of the assembly will be
easier with 2 people.
• Make sure you have enough
space to layout the parts before
starting.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Dispose of all packaging
carefully and responsibly.
• Place the product on flat and
steady surface during use.
• Keep these instructions for
future use.
• To ensure an easier assembly,
we strongly advise that all
fittings are only finger tightened
during initial assembly. Only
upon completion of the
assembly should all fixing
points be fully tightened.
• Periodically check that all
fixings remain fully tightened.
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
Always follow the manufacturer's instructions.
1
• Safety: To avoid any risk of
suffocation to animals or
children dispose of the plastic
bags immediately.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Cleaning Guidance
Minor stains and spillages
should be removed immediately
from cushion fabric,by wiping
over lightly with a damp cloth
and mild soapy water.
Light marking can also be
removed using this method.
To remove more stubborn stains
or marking,a good quality
proprietary domestic fabric cleaner
can be used.although it should
first be tested on and
inconspicuous area of the fabric.

Please check you have all the parts listed below
Components-Parts
Seat x 1 Seat Mounting Plate x 1
2
Piston x 1
3Five Star Base x 1
4
Castors x 5
5
2

Please check you have all the parts listed below
Allen Screw
M6x16mm
QTY 4
Allen Key
M6
B
3
QTY 1

2
1
3
4
4
5

100%
Shown Upside Down
5
4
5
Shown Upside Down
FRONT
FRONT
Ensure the ‘FRONT’ marking on
the underside of Seat Mounting Plate
is located at the front edge of Seat
.
2
2
1
1
FRONT
2
FRONT
BACK

4
3
Please remove the plastic cap
Push firmly down
Use lever to raise or lower seat
6
IMPORTANT
Remove cap
Push firmly down
Ensure cap is removed
Carefully align hole in seat mounting plate over piston
3
2
Assembly complete
KG
3

After Sales Support / Product Returns
7
Purchased from kobledesigns.com
In the unlikely event that you need to return the unit because it is faulty, please follow the
replacements or faulty items instructons at www.kobledesigns.com website.
Should you need to request replacement parts, please contact our after sales support team at:-
Email - [email protected]
Tel: + 44 (0)1799 513 466
Address: Koble Designs, 6 The Shires, Shirehill industrial Estate, Saffron Walden, Essex, CB11 3AP
Purchased from other retailer
If you purchased your product from one of our retail partners, please refer back to the retailer
directly, for any customer services related issues, refunds or returns requests.
Koble designs may still be able to offer support with technical related queries.