KOBLE Axel User manual

Axel Smart Desk
Assembly Instructions
Issue 1 - 15/12/2021
Thank you for purchasing the Axel Desk. In order to make the best use
of this product and to use it safely, please read the manual carefully before use and
Thank you for keep it for future reference.
STOCK REF. :DOAXEL
Imported By: Koble Designs(Justwise Group Ltd). CB11 3AP.

Please check you have all the parts listed below
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
1
Top Qty 1
1(1200x600x18mm)
Shelf Top Panel Qty 1
(1150x220x16mm)
2
Shelf Base Panel Qty 1
(1150x220x16mm)
3Shelf Side Panel Qty 2
(108x219x16mm)
4Divider Qty 1
(108x199x16mm)
5
Shelf Support Qty 2
(50x219x18mm)
6Back Panel Qty 1
(118x1126x5mm)
7
Leg (Left) Qty 2
(732mm)
8Metal Support Qty 2
(490x580mm)
10 Stretcher Qty 2
(940mm)
11
Main Components
Leg (Right) Qty 2
(732mm)
9

Please check you have all the parts listed below
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
M6*40 Cam Dowel Qty 16 Φ15*12 Cam nut Qty 16 Self adhesive covers Qty 16
2
A B C
Tools needed (Not supplied)
Screwdriver Tape Measure Hammer
D
G
JM
M6 Washer Qty 14
N
M6*16 Allen Screw Qty 14
EF
KL
Power Adapter 150cm Qty 1 Wireless Charging Coil Qty 1
H
Fixings, Fittings And Tools
Corner bracket Qty 6
Screw Qty 4
Cable Clips Qty 3
M6 Split Lock Washer Qty 14 M6*45 Allen Screw Qty 4
M4 Allen Key Qty 1

Main Component Diagram
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
3
1
3
4
4
5
6
6
9
8
9
8
7
2
Left
Right
11
11
10
10

4
Assembly Steps
Step 1
A
Cam Dowel Qty 16
A
Cam nut Qty 6
B
B
Step 2
3
3
3
4
4
5
2
UNDERSIDE
Turn
over
Ensure grooves
are aligned
AA
A
B
B
B

B
6
6
2
3
7
5
Assembly Steps
Step 3
Cam nut Qty 10
B
Step 4
3
B
B2

6
Assembly Steps
Step 5
Self adhesive covers Qty 16
C
Step 6
Wireless Charging Coil Qty 1
L
Shown upside down.
L
Push firmly
down
Turn knob
to secure
A B
2
C
IMPORTANT
Push wireless charging coil firmly down.
Maintain pressure and turn central
knob to secure
L
UNDERSIDE
1
Use self adhesive covers
to cover fixing holes.
C

D
E
F
8
9
D
E
F
Shown upside down.
7
Assembly Steps
Step 7
Step 8
UNDERSIDE
1
M4 Allen Key Qty 1
N
M6 Washer Qty 7
F
M6 Split Lock Washer Qty 7
E
M6*16 Allen Screw Qty 7
D
10
9
8

D
E
F
M4 Allen Key Qty 1
N
M6 Washer Qty 7
F
M6 Split Lock Washer Qty 7
E
M6*16 Allen Screw Qty 7
D
9
D
D
Shown upside down.
8
Assembly Steps
Step 9
UNDERSIDE
1
D
8
10

9
Assembly Steps
M4 Allen Key Qty 1
N
M6*45 Allen Screw Qty 4
G
N
G
G
Step 10
Shown upside down.
UNDERSIDE
1
11
11

10
Wireless Charging Coil Qty 1
L
N
H
K
Assembly Steps
M4 Allen Key Qty 1
N
Screw Qty 4
H
J
J
Corner bracket Qty 6
Power Adapter 150cm Qty 1
K
1
H
L
K
Step 11
Step 12
Shown from
behind.
Shown from behind.
Two people required!!
FRONT
BACK
L
2
M
Cable Clips Qty 3
Use Cable Clips to route the
power cable as required
M
A B
M
Fixed
Route cable
through cable
tidy clip .

Wireless charging function
If you have a wireless charging compatible phone, please put the phone on the wireless
charging indicator and check if the phone is successfully connected to the charging function.
If not, move the mobile phone around the logo until the connection is successful.
Some phone cases may inhibit the wireless charging function or it's efficiency. It may be
necessary to remove the phone case if difficulties with charging are experienced.
Wireless charging will only work with wireless charging compatible mobile devices.
Technical Specification
Working voltage: DC DC 5V/2A
Wireless Charging:5W
Power Supply: AC adapter,100-240V~50/60Hz
11
Wireless
Charging
Location

Safety and Care Advice
1.The maximum weight that can be placed on this product is 30KG
2.This product must not be used as a seat.
3. Always use the original AC power adapter and power cable, otherwise it may cause slow
Function
7.Do not expose the product to dust or smoke.
8.If the product will not be used for a long time,please unplug the power.
9. When using the product ,if smoke appears,or if there is a peculiar smell,please turn off the
power,pull out the socket and seek professional help.
10.Pull out the plug before cleaning the surface of the product. It can be cleaned with a damp
cloth and soap.
6.Keep the product away from containers holding liquid.If any liquid enters into the product,
it may be damaged.
5.Do not expose the product to damp or moisture.
4. In order to avoid accidents, do not open any electrical covers. Refer to a professional if the
circuit is faulty.
wireless charging,In extreme cases,an incompatible AC power adapter may burn out.
Wireless charging function
Trouble shooting
If any failure occurs, please refer to the following solutions, to help solve the problem.
If these are of no help, please contact the customer service helpline.
PROBLEM PROBLEM CAUSE REMEDY
No power display
No wireless
charging
Power plug not inserted properly.
There is no power in the socket.
The power is not switched on.
Power not connected.
Mobile device does not have wireless charging
function.
Check plug.
Check power supply.
Turn on the power socket.
Check power is connected and on.
Check your mobile debice has wireless
Remove any cover from your mobile device.
charging capability.
Disposal
If disposal of this product becomes necessary, please do this in an environmentally
responsible way. Contact your local government office or authority for suitable disposal or
recycling options in your local area. Do not dispose of this product, or it's components, with
your general domestic waste.
12

After Sales Support / Product Returns
13
Purchased from kobledesigns.com
In the unlikely event that you need to return the unit because it is faulty, please follow the
replacements or faulty items instructons at www.kobledesigns.com website.
Should you need to request replacement parts, please contact our after sales support team at:-
Email - [email protected]
Tel: + 44 (0)1799 513 466
Address: Koble Designs, 6 The Shires, Shirehill industrial Estate, Saffron Walden, Essex, CB11 3AP
Purchased from other retailer
If you purchased your product from one of our retail partners, please refer back to the retailer
directly, for any customer services related issues, refunds or returns requests.
Koble designs may still be able to offer support with technical related queries.