KOBLE Naples GFNAPB Installation guide

Care & Instruction Manual
Please read and retain these instructions for future
reference
STOCK CODES : GFNAPB
Imported By: Koble Designs (Justwise Group Ltd). CB11 3AP.
Naples Furniture Set - 2 seater
Issue 1 - 02/03/22

2
Safety and Care Advice
Check you have all the
components and tools listed on
pages 3 and 4.
Remove all fittings from the
plastic bags and separate them
into their groups.
Small parts could choke if
swallowed, keep children and
animals away from work area.
Make sure you have enough space
to layout the parts before starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not fully tighten bolts until the
whole bed is assembled. Do not
overtighten the nuts to avoid
causing damage to the threads.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging carefully
and responsibly.
Place product on an even surface
perior to using.
Suitable for Domestic Garden use
only.
Children should not be left alone
in situ with product, please refrain
climbing onto the product.
Frequently check any damage to
the product including the
underside and tighten fixings
where is required.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Daily cleaning:
Wipe clean with a damp cloth.
Use only clean water.
Wipe dry with a clean soft
cloth.
Do not use detergents,
solvents or other chemicals on
oiled surfaces, as this may
cause discoloration.
Color stains from eg. red wine
or the like must be wiped o ff
immediately.
For cushion covers, use
sponge clean only.
We recommend the use of
furniture corvers when not
in use.
In order to prolong the life of
your product, we recommned it
be stored in a dry and protected
area during of season periods.
Do not use any abrasive
substance which may scatch
the surface.
Do not stand on seating. Do not sit
on arm or backrest ledges. Give
your hardwood furniture a yearly
scrub with soapy water, followed by
a thorough rinse. This removes
algae and pollution to restore the
timber's surface, keeping it in good
condition.

Seat frame Qty 1 (141x77x41cm)
3
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
3 Leg frame (back) Qty 1 (136x38x29cm) 4 Back Cushion Qty 2 (66x41x10cm)
5Seat Cushion Qty 1 (133x68x10cm)
2 Leg frame (front) Qty 1 (136x38x29cm)
1

Fixings, Fittings And Tools
4
For missing or damaged parts, call our Customer Helpline: 01799 513466 or email
[email protected]
BA
M6 Washer Qty 6
allen Key Qty 1
35mm M6 Bolt Qty 4 20mm M6 Bolt Qty 2
C
D

Twopeoplerequired
5
Step1
Step2
AssemblySteps
Ax4 Cx2 Dx1
Bx6
Twopeoplerequired
FRONT
BACK
Assemble the legsand
to the underside of seat
frame , using fixings,
, and asshown.
Note: Screwsare located
at each side. Screwsin
the centre.
2
1A
BC
3
C
A
FRONT
BACK
Connect leg framesand
togetherasshown.
Note: No screwsare
required.
2
3
B
A
B
A
B
A
B
AB
C
B
C
3
2
3
2
1

6
AssemblySteps
Step3
Place seat cushion and
back cushionson to the
chairframe.
Step4
Assembly is complete.
5
4
5
4
4

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
WARNINGS
Dispose of all packing carefully and responsibly.
Place product on an even surface prior to using.
Suitable for Domesc Gaden use only .
Children should not be le alone in siu with poduct, please refrain children climbing onto the
product.
Frequently check any damage to the product including the underside and g ten fixings where
required.
Self Assembly
Check you have all the components and tools listed before assembly.
Remove all fi ngs from the plastic bags and separate them into their groups.
Keep children and animals away from the work area, small parts could choke if swallowed.
Make sure you have enough space to layout the parts before starng.
Do not stand or put weight on the parts during assembly, this could cause damage.
Assemble on a so l vel surface to avoid damaging the unit or your floor.
Glass
This product is manufactured from toughened safety glass. In the unlikely event that the glass fails it
will break into a large number of small fragments that may be spread over a wide area. This is a
feature of toughened glass, designed to remove the risk of injury from glass breaking into large
shards.
If the glass is chipped or broken, stop using the product.
Do not place very hot or very cold items on the glass.
Do not use the glass as chopping surface. Do not strike the glass with hard or pointed items.
Tables
Do not sit or stand on the table.
Chairs
Do not stand on the seang.
Sun loungers
Only one person to use lounger at any given me.
Ensure there are no persons sing on lounger whilst adjusng back height.
Sofas
Do not sit on arm or back rest ledges.
7
CARE/CLEANING
Werecommendtheuseoffurniturecoverswhennotinuse.
Inordertoprolongthelifeofyourproduct,werecommenditbestoredinadryandprotectedarea
duringoffseasonperiods.
Donotuseanyabrasivesubstanceswhichmayscratchthesurface.

8
Glass
Washglasswithmildsoapandwater,rinsethoroughly,anddryglasscompletely.
Donotuseanyabrasivesubstanceswhichmayscratchthesurface.
Timber
Giveyourhardwoodfurnitureayearlyscrubwithsoapywater,followedbyathoroughrinse.This
removesalgaeandpollutiontorestorethetimber'ssurface,keepingitingoodcondition.
Metal/Rattan
Useacleansoapydampclothandwipedownthesurfaces–leavetofullydrybeforestoring.
Donotuseanyabrasivesubstanceswhichmayscratchthesurface.
Cushions
Spongecleancushionsonly,Forstubbornstainscommercialavailablefabriccleanersareavailable
pleasereviewapplicationinstructionsonproductbeforeusingonyourcushions.
In the unlikely event that you need to return the item because it is faulty, please follow the 'Product Returns' instructions
at www.kobledesigns. com website.
Should you need to request replacement parts, please contact our after sales support team at:-
Email - [email protected]
Tel:+ 44 (0)1799 513 466
Address: Koble Designs, 6 The Shires, Shirehill industrial Estate, Saffron Walden, Essex, CB11 3AP
Purchased from other retailer
If you purchased your product from one of our retailer partners, please refer back to the retailer directly, for any
customer services related issued , refunds or returns requests.
Koble designs may still be able to offer supports with technical related to queries.
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental
safe recycling.
Purchased from Kobledesigns.com