KOCOM IP-201P Guide

Thank you very much
for purchasing KOCOM
Interphone.
please read this manual
thoroughly to ensure
correct usage,
before operating
DIRECT INTERPHONE
IP-201P USER(Installation)MANUAL
PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY
AGENCY ADDRESS
KOCOM Warranties the original p rchaser of this prod ct as follows.
1) This prod ct is prod ced nder strict q ality control and inspection proced res.
2) If this prod ct breaks down d ring proper se as a res lt of prod ct defect, KOCOM
will repair it within one year from date of p rchase free of charge.
3) The following cases will be s bject to charge, even d ring warranty period:
a. Breakdown d ring transport, or thro gh careless treatment, by cons mer.
b. Breakdown ca sed by na thorized repair, or system modification.
c. Breakdown ca sed by nat ral disaster or power disorder.
IP-201P-01 00. 01
To receive after sales service, have the following ready when
you contact our branches
1. Name of the prod ct
2. Model n mber of the prod ct
3. The area of problem
4. Phone n mber and address at
which yo can be contacted.
Perfect for private conversations
Delightful 1-melody signal sound
Easy wiring with 2lines of non-polarity
Power : D.C 6V (main only) 4 Piece of 1.5V batteries
(one side insert) - IP-201P DC
2Stations full direct
Range: 0.65mm wire, 300m line
Easily mounted on wall,desk
MAIN SUB
Features
Warranty
Warranty Card
MADE IN KOREA

Power Lamp
Call B tton
Handset
A- Choose a place on the wall where yo
want to hang the Indoor station.
B- Fasten the wall hanger on the wall.
C- Indoor station can be h ng on the wall
hanger easily now.
Pick p the handset and comm nicate
with a visitor. After end of comm nication,
ret rn the handset where it is locked
The s bdoor station is
ringing.
B
E
N
Z
E
N
E
T
H
I
N
N
E
R
Keep away from h midifier and
stove. High temperat re and
h midity can ca se malf nction
When cleaning, never se wet
hands, volatile benzene or paint
thinner.
Maintain the prod ct clear by
freq ently cleaning with soft
cloths
As this device consists of precise electronic components, and high voltage is generated
internally, do not attempt to disassemble.
Do not drop lndoor station, and
avoid strong impact.
Precautions for Operation
Installation
Specifications
ow to operate (Instruction for operating)
Name of Each Part
When a visitor
p shes the maindoor
station bell,
Wring Diagram
Component
Description DP-201P AC DP-201P DC
Electric so rce AC DC 6V(LR6-AA 1.5V X 4)
Cons mption In se 30mA,Signal 150mA In se 30mA,Signal 150mA
Signal So nd Electronic Chime Electronic Chime
Wiring 2Wired non-polarity 2Wired non-polarity
Range 300m( 0.65mm) 300m( 0.65mm)
Master station for Maindoor- se S bstation for S bdoor- se Wall hanger for master station
1B
2Y 1B 2Y