Kogan NBMOPSTNSSA User manual

SUPER SQUEEZE STANDING
MOP
NBMOPSTNSSA

•After use, rinse the sponge head 3-4 times with clean water to ensure the
cleanliness of the sponge head and prolong the service life.
•Do not utilise corrosive (PH<5) detergents or bleach to avoid damage to the
sponge head.
•Do not expose the sponge head to the sun.
•It is recommended to replace the sponge head once every three months to ensure
the best cleaning effect.
•The sponge head comes with a cleaning agent and it is normal for foam to form
during the cleaning process.
Handle 1
Handle 2
PVA Sponge
Frame
SAFETY & WARNINGS
COMPONENTS

Cleaning
Squeezing
Standing/storage
INSTRUCTION

1. Connect the upper pole and the middle pole and tighten clockwise.
2. Connect the middle pole to the mop base and tighten clockwise.
ASSEMBLY

3. Align the sponge head with the mop base and snap into place.
Note:
Ensure that the mop head is securely clipped into place before use, as it may
otherwise come loose when squeezing out the sponge. Check that there is no
gap between the mop head and its base, as shown below:
Correct installation
Incomplete installation
Gap between
head and
base

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com