Kohler MING User manual

MING
INSTALLATION INSTRUCTIONS
MIRROR
K-77115T
BEFORE YOU BEGINBEFORE YOU BEGIN
!
!
!
!
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-
Before installation carefully inspect the new fixture for any
signs of damage.
Tempered glass cannot be cut.
Don't use acidic or alkalic cleaners or
alcohol to clean the wooden surface. Use a dampened
cloth to clean.
please leave instructions for the
consumer.
WARNING: Risk of injury or product damage.
WARNING:
!This product complies with GB 24977-2010.
!
!
!
!
-
!GB 24977-2010
-1-
ACCESSORIES LISTACCESSORIES LIST
Screws ST3.5 35
ST3.5 35
4PCS
Wall Anchors
4PCS
ZHONGSHAN KOHLER SHOWER CO., LTD. NO13-1, XINYE ROAD, ZHONGSHAN TORCH
DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA POST CODE: 528437
13-1 528437
©
©
Copyright Kohler China Investment Co., Ltd. 2017
2017
WARNING: Risk of electrical shock.
WARNING: Risk of electrical shock.
WARNING: Risk of electrical shock.
A licensed
electrician should make all electrical connections.
Connect only to
a circuit protected by a typical two-pole circuit breaker.
Disconnect
power before servicing.
1312393-T01-A

-2-
ROUGHING-IN
UNIT : mm
Kohler reserves the right to change marked dimensions without prior notice.
Reference Value
800
174
27
37
INSTALLATION
Step 1: Drill holes at desired positions and fix two screws at the
same level. Keep a 2~3mm distance between the wall
and screw head. 2~3mm
Drill holes
4- 6mm
4- 6mm
Drill holes
4- 6mm
4- 6mm
L1=440 0.2
2~3mm
Keep a 2~3mm distance between the wall and screw head.
2~3mm
40mm from top of countertop (such as faucet)
()
40mm
ROUGHING-IN
Item Electrical Function Type Description Fixate Place
1 1
2 2
Defogger Input: 12V, Pmax=15W Back of Outer-mirror
Lighting Input: 12V, Pmax=15W Input: 12V, Pmax=15W
Input: 12V, Pmax=15W
Round the back
mirror bracket
ELECTRICAL COMPONENTS LISTELECTRICAL COMPONENTS LIST
1312393-T01-A

-3-
Recommended installation height(adjustable if necessary).
Unit: mm
()
mm
440 0.2
477
1100
1100
1500
Step 2: Install mirror
1. Hang one side of the back board on to the screw on the wall.
2. Slide the back board left and right to insert the screw into the
groove.
3.Rotate the mirror around the inserted screw to hang the other
side of the back board onto the other screw.
1.
2.
3.
Slide
Rotate
1312393-T01-A

-4-
1051705-T01-A
Insert two screws into back board.
Operation
1. Power on 1.
Button Functions
Fixture Outlet Wiring Color
Brown
Yellow&Green
BlueNeutral
Ground
Hot
Wire Input(three-core cable)
220V/50Hz
()
Power Brightness
Color
Temperature
Sensor
1312393-T01-A

-5-
Button Operation
1. Plug in and the power light on.
2. Press power button. Power light is on and sensor starts.
Brightness and color temperature buttons are adjustable.
Defogger is on.
Situation one
(User leaves sensor area when light is on.)
Sensor detects that nobody is in front of the mirror. The light
slowly goes off. The defogger closes after 30 minutes. The
mirror stands by.
1.
2.
()
30
Operable/ Functioning
/
Not operable/ Closed
/
After pressing
3 modes for brightness adjustment and 3 modes for color temperature adjustment.
33
When someone gets close to the mirror, the light slowly goes on. When the three lights
are white, the mirror is ready for use.
(As illustrated.)
(/)
Press
Status
when
user gets
closer.
Status
when
user
leaves.
1312393-T01-A

-6-
1.
2.
3.
4.
5. .
6. .
7.
USER MAINTENANCEUSER MAINTENANCE
Warn! Risk of product damage.
1.
2.
3.
4.
5. The mirrored cabinet door and interior are constructed of
mirror and aluminum. Use only a damp cloth to clean.
Spray the cloth, not the mirror when cleaning. Mirrors are
damaged by the use of ammonia or vinegar based
cleaners. Rubbing alcohol can be used for stubborn stains
6. Use no abrasive cleansers on any part of the mirrored
cabinet.
7. The white frame should be cleaned with a damp cloth only.
Many cleansers contain abrasive and chemical substance
which is not suitable for cleaning stainless steel, enamel,
plating or plastic products. You may use mild cleansers or
soaps to clean the surfaces. Wipe any splashes of cleaner
solutions from the surface with clean soft cloth.
Maintain ventilation in the bathroom, and separate the dry
area from the damp one if conditions permit. Try to open
the door and windows of the bathroom and maintain good
ventilation.
Kohler mirrored cabinet are dealt with strict procedures for
damp-proof, whose good damp-proof function ensures
good performance even in bathroom of huge humidity. Yet
do not splash and pour water directly on the mirrored
cabinet. Make sure that the bathroom is not over damp
and wipe any splashes from surfaces immediately.
Maintenance of door board: Clean and wipe door board
regularly, and wipe the condensation vapor with dry and
soft cloth.
.
Situation two
(User press power button when the light in on.)
The light slowly goes off. The defogger closes after 30
minutes. The buttons are under factory set status.
()
30
* Long press brightness and color temperature buttons to quickly shift between
different modes.
*
Press
1312393-T01-A