Kohler 10742A-CP User manual

Installation and User Guide
Omega Slide Showers
1111352-A2-A
MODEL NUMBERS
Omega 9 Omega 11 Omega 14
10742A-CP 10743A-CP 10744A-CP
Important! Please quote the approprate model number when ordering spares
OS
MO
DEL N
U
MBER
S
O
me
g
a 9
O
me
g
a 11
O
me
g
a 14
1
0
742A-
C
P 1
0
74
3
A-
C
P 1
0
744A-
C
P
p
I
m
p
ortant
!
qppp gp
Pl
ease
q
uote t
h
e a
pp
ro
p
rate mo
d
e
l
num
b
er w
h
en or
d
er
i
n
g
s
p
ares

THANK YOU FOR CHOOSING KOHLER COMPANY
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start the installation. If you
encounter any installation or performance problems please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
TOOLS & MATERIALS
BEFORE YOU BEGIN
Drill and
Assorted Bits Tape Measure Level Pencil Phillips Screwdriver
2
1111352-A2-A
TECHNICAL SPECIFICATIONS
1. Observe all local plumbing and building codes.
2. Shut off the main water supply.
3. Kohler Co. reserves the right to make revisions in the design
of products without notice.
1. Suitable for mains, unequal and low pressures
2. Minimum recommended operating pressure: 50 Kpa
3. Maximum recommended operating pressure: 500 Kpa
4. Maximum operating Temperature: 70°C
5. Silverflex hose length: 1.5m
6. Elbow connection 1/2” BSP
7. 3 Star WELS rating regulated between 7.5 and 9.0 litres/minute

INSTALLATION
31111352-A2-A
CARE AND CLEANING
Like anything of lasting quality, Kohler tapware and fittings require a certain
amount of periodic care to preserve their lustrous finish. Clean your new Kohler
tapware and fittings with a mild soap, rinse thoroughly with warm water and dry
with a clean, soft cloth. The ideal cleaning technique is to always blot dry any
water from metal surfaces.
Allowing water to evaporate on metal will form water deposits. It is important to
use a dabbing action to dry metal, not an abrasive or rubbing action.
Never use cleaners containing abrasive cleansers, ammonia, bleach, acids or
chemicals that can damage the finish. By taking the time to dry your tapware
often, soap and water deposits can be prevented.
Failure to comply with these instructions may void Kohler’s warranty obligations.
1. Press rail into the brackets and mark the wall through the screw holes
with a pencil. (Ensure that the rail is vertical).
2. Drill 4 holes in the marked position and place plugs into holes.
3. Place the Slider, the soap dish and the bracket covers onto the slide rail.
4. Screw the slide rail to the wall and fit the bracket cover
5. Fit the soap dish onto the bottom bracket cover.
6. Install the Outlet Elbow to the G 1/2” nipple using thread tape.
7. Thoroughly flush the plumbing before installing the Showerhead.
8. Check for placement of rubber washers in each end of the Silverflex hose.
9. Connect the shower hose to the Outlet Elbow and handpiece.

1116022
Cover
1116025
Soap
Dish
1116018
Omega 9 1116019
Omega 11 1116020
Omega 14
1116029
Flow
Regulator
1116028
Silverflex
Hose
1116026
Screw Kit
1116027
Outlet
Elbow
1116023
Slider
1116024
Slide Rail
1116021
Bracket
4
1111352-A2-A
SERVICE PARTS

CUSTOMER CARE
51111352-A2-A
Kohler Co. warrants its tapware manufactured after January 1, 2006, to be leak and drip
free during normal residential use for as long as the original consumer purchaser owns
his/her home. *If the tapware should leak or drip during normal use, Kohler will, free of
charge, mail to the purchaser the cartridge necessary to put the tapware in good working
condition.
Kohler also warrants all other aspects of the tapware, to be free of defects in material and
workmanship during normal residential use for as long as the original consumer
purchaser owns his/her own home. If a defect is found in normal residential use, Kohler
Co. will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment. Damage to a product caused by accident, misuse, or abuse is not covered
by this warranty. Proof of purchase (original sales receipt) must be provided to Kohler
with all warranty claims. Kohler Co. is not responsible for labour charges, installation, or
other consequential costs. In no event shall the liability of Kohler exceed the purchase
price of the tapware.
If the tapware is used commercially, Kohler warrants the tapware to be free from defects
in
material and workmanship for one (1) year from the date the product is installed, with all
other terms of this warranty applying except duration.
If you believe that you have a warranty claim, contact Kohler Co., either through your
plumbing supplies retailer, or by writing.
Australian residents please contact: Kohler Co., Attn.: Customer Service Department,
PO Box 257, Regents Park, NSW 2143.
New Zealand residents please contact Kohler Co., Attn.: Customer Service Department,
133 Diana Drive, Glenfield, Auckland.
Please be sure to provide all pertinent information regarding your claim, including a
complete description of the problem, the product, model number, colour, the date the
product was purchased and from whom the product was purchased. Also include your
original invoice. For other information, or to obtain the name and address of the service
and repair facility nearest you, call 1300 362 284 from within Australia or [phone]
from within New Zealand.
The foregoing warranties are in lieu of all other warranties, express or implied, including
but not limited to the implied warranties of merchantability and fitness for a particular
purpose.
Seller disclaims any liability for special, incidental or consequential damages.
This warranty is to the original consumer purchaser only, and excludes product damage
due to installation error, product abuse, or product misuse, whether performed by a
contractor, service company, or the consumer. This is our exclusive written warranty.

NEW ZEALAND
KOHLER NZ LTD.
AUSTRALIA
KOHLER CO.
Ph [phone] Fax [phone]
Free Ph: 0800 100 382
Free Fax: [phone]
[e-mail]
www.kohler.co.nz
Free Ph: 1 300 362 284
Free Fax: [phone]
[e-mail]
www.au.kohler.com
6
1111352-A2-A
SALES & SERVICE