Kohler K-77681 Series User manual

Kohler Co. 1 1299535-X2-B
BEFORE YOU BEGIN 
TOOLS 
• Please read these instructions carefully to familiarize yourself
with the required tools, materials, and installation sequences.
Follow the sections that pertain to your particular installation.
This will help you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
• All information in these instructions is based upon the latest
product information available at the time of publication.
Kohler China. reserves the right to make changes in product
characteristics, packaging, or availability at anytime without
notice.
•
These instructions contain important care, cleaning and warranty
information - please leave instructions for the consumer.
• Please keep this installation instruction for future reference.
• The pluming installation must comply with Water Supply
Regulations/Bye-laws, Building Regulations or any particular
 regulationsandpractices,speciedbythelocalwater
company or water undertakers.The installation should be
carried out by a plumber.
• Beforeinstallationcarefullyinspectthenewxtureforany
signs of damage.
•

 

 
 
• 
 
 
• 
 
• 
• 
 
 
• 
NOTE: Some installation parts might not be provided.
 
ROUGHING-IN 
*Kohler reserves the right to change marked dimensions without prior notice.

144
166
G1"
180
245
30
228200
55 129
250
Unit: mm

INSTALLATION AND CARE GUIDE
ขอแนะนําการติดตั้งและการดูแลรักษา
BEAM TOILET FLUSH VALVE
ฟลัชวาล์วโถสุขภัณฑ์ รุ่นบีม
K-77681X/K-77682X

ROUGHING-IN 
INSTALLATION 
A. Drill the wall.
Mark the position and drill the wall according to dimensions as
illustrated.
NOTE: The depth can be adjusted as desired.
B. Fix the box.
 Insertandxtheboxtothewallwith4screws.
 Cutexcessivepartofthebox.
NOTE: Make sure the cut pipe is proper dimension and level.
Cut the inlet pipe if necessary.


 



 

Model /  K-77681X K-77682X
Flush Volumn/ 4.5 L/ 6 L/
Minimum Water Pressure/(Dynamic Pressure/ 0.1 MPa/
Maximum Water Pressure/(Static Pressure/ 0.75 MPa/
Water Temperature/ 1~ 50 °C/
290
129
260
G1"
Screw
สกรู
Cut excessive part
of the box.
ตัดกลองติดตั้งฟลัชวาลว
สวนเกินออก
Wall/
ผนัง
1299535-X2-B 2 Kohler Co.

C.Installtheushvalve.
Fixtheushvalveontoinlet and outlet pipeswithwrenchas
illustrated.
NOTE: Cleanwasteinthesupplypipebeforexinginletpipe.
Fix onto inlet pipe
Connect the connector to the inlet pipe.
Put seal onto the connector.
 Tighteninletpipeandushvalvewithwrench.
Fixontooutletpipe
Insert the nut and seal on to the outlet pipe.
 Tightenoutletpipeandushvalvewithwrench
NOTE: Addjust height range of outlet pipe according to the toilet
manufacturer’s instructions. Cut the outlet pipe if necessary.
D.Fixthemountingplate.

Cut tiles according to dimensions as illustrated.
Tighten the screws on the mounting plate.
Cut the rod connector. Provide a gap (17.8+1
0
) between the
rod and the outer mounting plate as illustrated.
NOTE: Do not overtighten the screw to avoid damaging the
mounting plate.


 







 




(17.8+1
0
)
 
 
Addjust height range
of outlet pipe according to
the toilet manufacturer’s instructions.
Inlet Pipe G1" (Not Supplied)
ปรับระยะความสูงของทอนํ้าออกตาม
คําแนะนําจากผูผลิตโถสุขภัณฑ
ท่อนํ�าเข้า G1" (ไม่รวมในชุดผลิตภัณฑ์)
Outlet Pipe G3/4"
ท่อนํ�าออก
Seal
ซีล
Seal
ซีล
G1" Connector
ข้อต่อ G1"
Flush Valve
ฟลัชวาล์ว
Nut
นอต
124-130
155-161
Screw
สกรู
Mounting Plate
ฐานยึด
Rod
ก้านกด
Mounting Plate
ฐานยึด
Finished Wall
ผนัง
17.8+1
Kohler Co. 3 1299535-X2-B

CARE AND CLEANING 
Face Plate
ฝาครอบ
Button
ปุ่มกด
Screw
สกรู
Wrench
ประแจ
Mounting Plate
ฐานยึด


F.Installationcheckout.
Test run and check the valve after installation.
Leakage at inlet connector: Check whether the seal is properly
installed, nut is tightened and whether the inlet pipe is at
proper vertical and horizontal level.
Leakage at outlet connector: Check whether the seal is twisted
and the nut is tightened.
 Watercontinuesrunningatushvalve:Checkwhetherthe
rod is still too long, cut the rod if necessary. Continue press
the rod with the button to make the valve continue working.
No water or too little water running from the valve: Check
whether the rod is too short.
Contact the manufacturer for any other problems.
For best results, keep the following in mind when caring for your
product
Always test your cleaning solution on an inconspicuous area
before applying to the entiresurface.
 Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that
lands on nearby surfaces.
Do not allow cleaners to soak on surfaces.
Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
The ideal cleaning technique is to rinse thoroughly and blot
dry any water from the surface after each use.


 
   
 
 
 
  
 





 
  
 

   
 
 
 
E. Fix the faceplate.
Place the face plate onto the mounting plate. Then slide the
faceplate downwards.
 Tightenthescrewwithwrenchtonishtheinstallation.
NOTE: When removing the faceplate, unscrew the screw 3 mm
out and slide the faceplate upwards to remove it.

 

 

1299535-X2-B Kohler Co.
CallCenter:+(66)22046222
e-mail: [email protected]