Komatsu Galeo HD605-7E0 User manual

GROSS HORSEPOWER
551 kW 739 HP
NET HORSEPOWER
533 kW 715 HP
MAXIMUM GVW
110180 kg 242,900 lb
Photo may include optional equipment.
HD605-7E0
www.Komatsu.com Printed in Japan 200603 IP.P.AD
CEN00095-00 Materials and specifications are subject to change without notice
is a trademark of Komatsu Ltd. Japan
Standard equipment may vary for each country, and this specification sheet may contain attachments and optional equipment
that are not available in your area. Please consult your Komatsu distributor for detailed information.
STANDARD EQUIPMENT FOR BASE MACHINE
OPTIONAL EQUIPMENT
CAB:
●Air conditioner
●Heater and defroster
●Operator seat, air suspension type
●Radio, AM/FM with cassette
●Seat belt, 78 mm 3" width for passenger
seat
●Sunvisor, additional
●Power window (R.H.)
BODY:
●Body liner
●Platform guard, right hand side
●Without body heating (with muffler)
LIGHTING SYSTEM:
●Back work lights, left and right sides
●Fog lights
●Yellow beacon
SAFETY:
●ABS (Antilock Brake System)
●ASR (Automatic Spin Regulator)
●Automatic supplementary steering
●Rear view camera and monitor
ARRANGEMENT:
●Batteries for cold area arrangement
●Cold area arrangement
●Sandy and dusty area arrangement
OTHER:
●Autogreasing system
●Engine coolant heater
●Engine oilpan heater
●Engine side cover
●Engine underguard
●Fire extinguisher
●Fuel quick charge
●Payload meter II
●Muffler (no body heating type)
●Radiator shutter, canvas type
●Spare parts for first service
●Three-mode hydropneumatic suspension
●Tool kit
●Transmission underguard
●Vandalism protection
●VHMS
(Vehicle Health Monitoring System)
●VHMS with satellite communication kit
TIRES:
●24.00-35-36PR
ENGINE:
●AISS (Automatic Idling Setting System)
●Alternator, 90A/24V
●Batteries, 2 x 12V/200Ah
●Engine, Komatsu SAA6D170E-5
●Mode selection system
●Starting motor, 2 x 7.5 kW
CAB:
●Ashtray
●Cigarette lighter
●Cup holder
●Electronic hoist control system
●Electronic maintenance
display/monitoring system
●Operator seat, reclining, suspension type
with retractable 78 mm 3" width seat belt
●Passenger seat
●Power window (L.H.)
●ROPS cab with FOPS, sound
suppression type
●Space for lunch box
●Steering wheel, tilt and telescopic
●Sunvisor
●Laminated glass, front
●Two doors, left and right
●Windshield washer and wiper
(with intermittent feature)
LIGHTING SYSTEM:
●Back-up light
●Hazard lights
●Headlights with dimmer switch
●Indicator, stop and tail lights
GUARD AND COVERS:
●Exhaust thermal guard
●Fire protective covers
●Drive shaft guard (front and rear)
SAFETY EQUIPMENT:
●Alarm, backup
●ARSC (Automatic Retard Speed Control)
●Coolant temperature alarm and light
●Front brake cut-off system
●Hand rails for platform
●Horn, electric
●Ladders, left and right hand sides
●Overrun warning system
●Rearview mirrors and under view mirrors
●Supplementary steering
OTHER:
●Centralized greasing
●Electric circuit breaker, 24V
●Mud guards
BODY:
●Body exhaust heating
●Cab guard, left side
●Spill guard, 150mm 6"
TIRES:
●24.00 R35 HD
605

2
Harmony with Environment
● Komatsu SAA6D170E-5 engine
North American EPA Tier 3 and EU
stage 3A emission certified for 2006
●Low operation noise
●Lead-free radiator
●Brake cooling oil recovery tank
Productivity Features
●High performance Komatsu SAA6D170E-5 engine
Net horsepower 533kW 715HP
●Mode selection system
(Variable horsepower at Economy mode)
●Automatic idling setting system (AISS)
●Automatic retard speed control (ARSC)
●7-speed, fully automatic K-ATOMiCS transmission
●Fully hydraulic controlled wet multiple-disc brakes
and retarder
Retarder absorbing capacity (Continuous descent)
785kW 1,052HP
●Long wheelbase and wide tread
●Large high strength body
Heaped capacity 40.0m352.3yd3
●Small turning radius 8.5m 27’11”
●PLM II (Paylord meter II )(Option)
3
GROSS HORSEPOWER
551 kW 739 HP @ 2000 rpm
NET HORSEPOWER
533 kW 715 HP @ 2000 rpm
MAXIMUM GVW
110180 kg 242,900 lb
Operator Environment
●Wide, spacious cab with excellent visibility
●Ergonomically designed cab
●Easy-to-see instrument panel
●Ideal driving position settings
●K-ATOMiCS with “Skip-shift” function
●Hydropneumatic suspension
●Built-in ROPS/FOPS
●Viscous cab mounts
●Electric body dump control lever
●Supplementary steering and secondary brakes
●Three-mode hydropneumatic suspension
(Automatic suspension) (Option)
Easy Maintenance
●Advanced monitoring system
●Wet multiple-disk brakes and fully
hydraulic braking system
●Extended oil change interval
●Centralized arrangement of filters
●Flange type rim
●Electric circuit breaker
●Centralized greasing points
●Vehicle health monitoring
system (VHMS) (Option)
Reliability Features
●Komatsu components
●High-rigidity frame
●Rigorous dump body design
●Reliable hydraulic system
●Flat face-to-face O-ring seals
●Sealed DT connectors
●ABS(Antilock brake system)(Option)
●ASR(Automatic spin regulator)(Option)
●Pedal-operated secondary brake
WALK-AROUND
HD605-7E0 OFF-HIGHWAY TRUCK OFF-HIGHWAY TRUCK
Genuine Answers for Land & Environment
Optimization
Photo may include optional equipment.
HD605-7E0

54
Komatsu technology
Komatsu develops and produces all major components,
such as engines, electronics and hydraulic components,
in house.
With this “Komatsu Technology,” and adding customer
feedback, Komatsu is achieving greater advancements
in technology.
To achieve both high levels of productivity and economical
performance, Komatsu has developed the main compo-
nents with a total control system.
The result is a new generation of high performance and
environment friendly machines.
High performance Komatsu SAA6D170E-5 engine
This engine delivers faster acceleration and higher
travel speeds with high horsepower per ton. Advanced
technology, such as Common Rail Injection system (CRI),
air to air aftercooler, efficient turbo-charger, and heavy duty
cooled EGR enables the engine to be North American EPA
Tier 3 and EU stage 3A emission certified. High torque at
low speed, impressive acceleration, and low fuel consump-
tion ensure maximum productivity.
Mode selection system
The system allows selection of the appropriate mode
between two modes <Power mode > or <Economy mode>
according to each working condition. The mode is easily
selected with a switch in the operator’s cab.
Power mode
Great productivity can be attained by taking full advantage
of high output power. It is appropriate for job sites where
larger production uphill-hauling is required.
Economy mode (Variable horsepower)
The engine power automatically changes depending on
loaded or unloaded conditions always to use an optimum
speed gear. It is appropriate for light work on flat ground.
PRODUCTIVITY FEATURES OFF-HIGHWAY TRUCK
HD605-7E0 OFF-HIGHWAY TRUCK
7-speed, fully automatic K-ATOMiCS transmission
The K-ATOMiCS (Komatsu Advanced Transmission with
Optimum Modulation Control
System) automatically selects
the optimum gear according
to vehicle speed, engine
speed and the shift position
you’ve chosen. The result:
the best gear for any driving
situation. K-ATOMiCS
(Komatsu Advanced Transmission with
Optimum Modulation Control System)
Automatic Retard Speed Control (ARSC)
ARSC allows the operator to simply set the downhill travel
speed and go down slopes at a constant speed. As a
result, the operator can concentrate on steering. The speed
can be set at increments of 1 km/h 0.6 MPH per click (±5
km/h 3.1 MPH of maximum speed adjustment) to match
the optimum speed for the slope. Also, since the retarder
cooling oil temperature is always monitored, the speed is
automatically lowered.
Go down 
slope 
at
constant 
speed
UP
SET
DOWN
CANCEL
AUTO RETARD
SPEED CONTROL
Fully hydraulic controlled wet multiple-disc
brakes and retarder
Wet multiple-disc brakes ensure highly reliable and stable
brake performance. The large-capacity, continuously
cooled, wet-multiple disc brakes also function as a highly
responsive retarder which gives the operator greater
confidence at higher
speeds when travel-
ling downhill.
• Retarder Absorbing
Capacity (continuous
descent): 785 kW
1,052 HP
• Brake Surface Area
(rear): 64,230 cm2
9,956 in2
Long wheelbase and wide tread
With an extra-long wheelbase, a wide tread and an excep-
tionally low center of gravity, the HD605-7 hauls the load at
higher speed for more production, and delivers superior driv-
ing comfort over rough terrain.
Large high strength body
A wide target area makes for easy loading with minimal soil
spillage and more efficient hauling. The body is built of
160 kg/mm2227,520 PSI wear-resistant high-tensile steel
with a Brinell hardness of 500.
The V-shape design also increases structural strength, and
provides excellent load stability.
Small turning radius
The MacPherson strut type front suspension has a special
A-frame between each wheel
and the main frame. The
wider space created
between the front wheels
and the main frame
increases the turning
angle of the wheels. The
larger this turning angle,
the smaller the turning
radius of the truck.
8.5m 27'11"
A-frame
PLM II (Payload Meter II )(Option)
PLM II allows the production volume and the working
conditions on the dump truck to be analyzed and controlled
directly via a personal computer. The system can store up
to 2900 working cycles.
In Cab
Laptop
RS232C
PLM
I
I
Memory card reader
Daily report
Note) The memory card, card reader and software for data processing are available as options.
Memory card
In Office
Automatic Idling Setting System (AISS)
This system facilitates quick engine warm-up and cab cool-
ing/warming. When setting the system ON, engine idle
speed is kept at 945 rpm when coolant temper-
ature is 50°C 122°F or lower. Speed automati-
cally returns to 750 rpm when coolant tempera-
ture reaches 50°C 122°F.
HD605-7E0

OPERATOR ENVIRONMENT
67
OFF-HIGHWAY TRUCK
HD605-7E0 OFF-HIGHWAY TRUCK
Wide, spacious cab with excellent visibility
Wide windows in the front, side and back, plus plenty of
space in the richly upholstered interior, provide quiet, com-
fortable environment from which to see and control every
aspect of operation. Front under view mirrors and side
under view mirrors have been added to improve safety.
Ergonomically designed cab
The ergonomically designed operator's compartment makes
it very easy and comfortable for the operator to use all the
controls. The result is more confident operation and greater
productivity.
Easy-to-see instrument panel
The instrument panel makes it easy to monitor critical
machine functions. In addition, a caution light warns the
operator of any problems that may occur. Problems are
recorded in the monitor and indicated as service codes.
This makes the machine very friendly and easy to service.
Ideal driving position settings
The 5-way adjustable operator seat and the tilt-telescopic
steering column create an optimum driving posture, for
increased driving comfort and more control over the
machine’s operations. The suspension seat dampens vibra-
tions transmitted from the machine and reduces operator
fatigue as well as holding the operator securely to assure
confident operation. 78mm 3"width seat belt is provided as
standard equipment.
“Skip-shift” function
Optimum travel speed automatically selected in response to
angle of ascent.
Reduced frequen-
cy of downshift
and smoother
operation are pro-
vided.
Hydropneumatic suspension for
all terrains
The hydropneumatic suspension
assures a comfortable ride even over
rough terrain and ensures maximum
productivity and operator
confidence.
Viscous cab mounts
Viscous mounts reduce the noise
transmitted to the cab and achieve a
quiet 77 dB(A) noise level.
Built-in ROPS/FOPS
These structures con-
form to ISO3471 and
SAE J1040 ROPS stan-
dards, and ISO 3449
and SAE J231 FOPS
standards.
Electric body dump control lever
The low effort lever makes dumping
easy.
A positioning sensor is installed for
dump body control which significant-
ly reduces the shock made by the
lowering of the dump body.
Supplementary steering and secondary brakes
Supplementary steering and secondary brakes are standard
features.
Steering: ISO 5010, SAE J1511, SAE J53
Brakes: ISO 3450, SAE J1473
Three-mode hydropneumatic suspension
(Automatic suspension) (Option)
Suspension mode is automatically switched to one of three
stages (soft, medium and hard) according to load and
operating conditions, for a more comfortable and stable ride.
F4 F4
Shift hold
F4
Shift down
F1
F4 F4
Shift down
F3 F3
Shift down
F2 F2
Shift down
F1
Conventional
Skip-shift
K-ATOMiCS with “Skip-shift” function
An electronically controlled valve is provided for each clutch
pack in the transmission for independent clutch engage-
ment/disengagement. It enables an ideal change in clutch
modulation pressure and torque cut-off timing in response to
travel conditions. This system and newly added “skip-shift”
function ensure smooth shifting and responsive acceleration.
Nitrogen gas
Oil
HD605-7E0

RELIABILITY FEATURES EASY MAINTENANCE
8
OFF-HIGHWAY TRUCK
HD605-7E0 OFF-HIGHWAY TRUCK
High-rigidity frame
Cast-steel components are used in the
main frame for high-stress
areas where loads and
shocks are
most concentrated.
Komatsu components
Komatsu manufactures the engine, torque converter,
transmission, hydraulic units, and electrical parts on this
dump truck. Komatsu dump trucks are manufactured with an
integrated production system under a strict quality control
system.
Rigorous dump body design
The standard dump body is made of 160 kg/mm2227,520 PSI
high-tensile-strength steel for excellent rigidity and reduced
maintenance cost. The V-
shape and V-bottom
design also increase
structural strength. The side
and bottom plates of the
dump section are reinforced
with ribs for added strength.
Reliable hydraulic system
The oil cooler is installed in the radiator lower tank, improv-
ing the reliability of the hydraulic system during sudden tem-
perature rises. Further, in addition to the main filter, a 25-
micron line filter is at the entrance to the transmission con-
trol valve. This system helps to prevent secondary faults.
Sealed DT connectors
Main harnesses and
controller connectors are
equipped with sealed DT
connectors providing high
reliability, water resistance
and dust resistance.
ABS (Antilock braking system) (Option)
Using its outstanding electronics technology, Komatsu is
the first in the industry to introduce ABS on construction
machinery. This system prevents the tires from locking,
thus minimizes skidding under slippery conditions while
applying the service brake.
ASR (Automatic spin regulator) (Option)
ASR automatically prevents the rear tires on either side
from slipping on soft ground for optimal traction.
Protection functions supported by electronic control
Item Function
Downshift inhibitor
Over-run inhibitor
Reverse inhibitor
Forward/Reverse shift inhibitor
Anti-hunting system 
Neutral safety
Even if the driver downshifts accidentally,a speed appropriate to the current gear is automatically set,preventing over-runs.
When descending grades, if the vehicle's speed surpasses the maximum for the current gear,
the rear brakes automatically operate, preventing over-runs.
The vehicle is prevented from moving backward when operating the body.
This device makes it impossible to shift from forward to reverse when the vehicle's speed surpasses 4 km/hour.
When running near a shift point, smooth automatic shifting takes place.
The engine is prevented from starting when the shift lever is not in neutral.
Flat face-to-face O-ring
seals are used to securely
seal all hydraulic hose
connections and to prevent
oil leakage.
Flat face-to-face O-ring seals
Advanced monitoring system
Extended oil change intervals
In order to minimize operating costs, oil change intervals
have been extended:
●Engine oil 500 hours
●Hydraulic oil 4000 hours
Centralized greasing
points
Greasing points are centralized
at three locations.
Flange type rim
Flange type rims
provide easy
removal/installation
for the tires.
Electric circuit breaker
A circuit breaker is adopted in
important electric circuits that
should be restored in a short
time when a problem occurs in
the electrical system.
Brake cooling oil recovery tank
To protect environment, a tank is installed to recover brake
cooling oil in the event of brake floating seal leakage.
Pedal-operated secondary brake
If there should be a failure in the foot brake, the parking
brake and front disc brakes
are activated as pedal operat-
ed secondary brake. In addi-
tion, when hydraulic pressure
drops below the rated level,
the parking brake is automati-
cally actuated.
Lead-free radiator
In addition to compliance with emission regulations, a lead-
free aluminum core is adopted for the radiator to comply
with global environmental requirements.
The Komatsu advanced monitoring system identifies main-
tenance items, reduces diagnostic times, indicates oil and
filter replacement hours and displays abnormality codes.
This monitor system helps to maximize machine production
time.
Wet multi-disc brakes and fully hydraulic braking
systems mean lower maintenance costs and higher relia-
bility. Wet disc brakes are fully sealed to keep contaminants
out, reducing wear and maintenance. Brakes require no
adjustments for wear, meaning even lower maintenance.
The parking brake is also an adjustment-free, wet multiple-
disc system for high reliability and long life. Added reliability
is designed into the braking system by the use of three
independent hydraulic circuits providing hydraulic backup
should one of the circuits fail. Fully hydraulic braking sys-
tems eliminate the air system so air bleeding is not
required, and water condensation that can lead to contami-
nation, corrosion and freezing is eliminated.
O-ring
Nipple
Hose
Centralized arrangement of filters
The filters are centralized so that they can be
serviced easily.
9
VHMS (Vehicle Health Monitoring System) (Option)
VHMS controller monitors the health conditions of major
components, enables remote analysis of the machine and
its operation. This process is supported by the Komatsu
distributors, factory and design team. This contributes to
reduced repair costs and to maintaining maximum avail-
ability.
KOMATSU
WebCARE Server
Personal
computer
terminal
(for downloading
data)
Internet
Komatsu
distributors
Customer
job site
Satellite
communication
HD605-7E0

10
SPECIFICATIONS
HD605-7E0 OFF-HIGHWAY TRUCK
11
OFF-HIGHWAY TRUCK
AXLES
Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-floating
Final drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Ratios:
Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.538
Planetary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.737
TRANSMISSION
Torque converter . . . . . . . . . . . . . . . . . . 3-elements, 1-stage, 2-phase
Transmission. . . . . . . . . . . . . . . . . . . . . Full-automatic, planetary type
Speed range . . . . . . . . . . . . . . . . . . . 7 speeds forward and 1 reverse
Lockup clutch. . . . . . . . . . . . . . . . . . . . . . . . . Wet, multiple-disc clutch
Forward . . . . . . . . . . . . . . . . . . . . . Torque converter drive in 1st gear,
direct drive in 1st lockup and all higher gears
Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Torque converter drive
Shift control. . . . . . . . . . . . . . . . Electronic shift control with automatic
clutch modulation in all gears
Maximum travel speed . . . . . . . . . . . . . . . . . . . 70.0 km/h 43.5 mph
WEIGHT (APPROXIMATE)
Empty weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46200 kg 101,850 lb
Max. gross vehicle weight . . . . . . . . . . . . . . . . 110180 kg 242,900 lb
Not to exceed max. gross vehicle weight, including options, fuel
and payload.
Weight distribution:
Empty: Front axle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47%
Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53%
Loaded: Front axle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32%
Rear axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68%
ENGINE
Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D170E-5
Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle
Aspiration. . . . . . . . Turbo-charged,air-to-air after-cooled,cooled EGR
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore x stroke . . . . . . . . . . . . . . . . . . 170 mm x 170 mm 6.69" x 6.69"
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . 23.15 ltr 1,413 in3
Horsepower:
SAE J1995. . . . . . . . . . . . . . . . . . . . . . . . . . Gross 551 kW 739 HP
ISO9249/SAE J1349 . . . . . . . . . . . . . . . . . . . . Net 533 kW 715 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 rpm
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical
Maximum torque. . . . . . . . . . . . . . . . . . . . . . . . . 339 kg•m 2,452 lb. ft
Fuel system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct injection
Governor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronically controlled
Lubrication system
Method . . . . . . . . . . . . . . . . . . . . . . . . Gear pump, force-lubrication
Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full-flow type
Air cleaner . . . . . . . . . . . . . . . . . . Dry type with double elements and
precleaner (cyclonpack type), plus dust indicator
SUSPENSION SYSTEM
Independent, hydropneumatic suspension cylinder with fixed throttle to
dampen vibration.
Effective cylinder stroke (front suspension) . . . . . . . . . . . 303 mm 11.9"
Rear axle oscillation:
Oil stopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.8°
Mechanical stopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.7°
MAIN FRAME
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-sectioned structure
STEERING SYSTEM
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydraulic power steering
with two double-acting cylinders
Supplementary steering . . . . . . . . . . . . . . . . . . . . . . . . . . Manual control
(meets ISO 5010, SAE J1511 and SAE J53)
Minimum turning radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.5 m 27'11"
Maximum steering angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39°
BRAKES
Brakes meet ISO 3450 and SAE 1473 standards.
Service brakes:
Front. . . . . . . . . . . . . . . . . . Fully hydraulic control, caliper disc type
Rear. . . . . . . . . Fully hydraulic control, oil-cooled multiple-disc type
Parking brake. . . . . . . . . . . . . . . . . . . Spring applied, multiple-disc type
Retarder . . . . . . . . Oil-cooled, multiple-disc rear brakes act as retarder.
Secondary brake. . . . . . . . . . . . . . . . . . . . . . . . Manual pedal operation.
When hydraulic pressure drops below the rated level,
parking brake is automatically actuated.
Brake surface
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1936 cm2300 in2
Rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64230 cm29,956 in2
BODY
Capacity:
Struck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.0 m337.9 yd3
Heaped (2:1, SAE) . . . . . . . . . . . . . . . . . . . . . . . . 40.0 m352.3 yd3
Payload. . . . . . . . . . . . . . . . . . . . . . . 63.0 metric tons 69.4 U.S. tons
Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 kg/mm2227,520 psi
high tensile strength steel
Structure . . . . . . . . . . . . . . . . . . . . . . . . . V-shape body with V-bottom
Material thickness:
Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mm 0.98"
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 mm 0.63"
Sides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 mm 0.55"
Target area
(inside length x width). . . . . . . . 6600 mm x 3870 mm 21'8" x 12'8"
Dumping angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48°
Height at full dump. . . . . . . . . . . . . . . . . . . . . . . . . . . 8800 mm 28'10"
Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exhaust heating
HYDRAULIC SYSTEM
Hoist cylinder . . . . . . . . . . . . . . . . . . . . . Twin, 2-stage telescopic type
Relief pressure . . . . . . . . . . . . . . . . . 20.6 MPa 210 kg/cm22,990 psi
Hoist time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.5 sec
CAB
Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS
(Roll-Over Protective Structure) standards.
TIRES
Standard tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.00 R35
SERVICE REFILL CAPACITIES
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 780 ltr. 206.1 U.S. Gal
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 ltr. 21.1 U.S. Gal
Torque converter, transmission and
retarder cooling . . . . . . . . . . . . . . . . . . . . . . . 215 ltr. 56.8 U.S. Gal
Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 ltr. 25.1 U.S. Gal
Final drives (total). . . . . . . . . . . . . . . . . . . . . . . . . 42 ltr. 11.1 U.S. Gal
Hydraulic system . . . . . . . . . . . . . . . . . . . . . . . . 122 ltr. 32.2 U.S. Gal
Suspension (total). . . . . . . . . . . . . . . . . . . . . . . 55.6 ltr. 14.7 U.S. Gal
DIMENSIONS
4235mm 13'11"
3515mm 11'6"
4170mm 13'8"
5395mm 17'8"
4400mm 14'5"
4065mm 13'4"
1985mm 6'6" 4300mm 14'1"
9355mm 30'8" 3070mm 10'1"
48
560mm 1'10"
3860mm 12'8" 8800mm 28'10"
6600mm 21'8"
8710mm 28'7"
8500mm 27'11"
796mm
2'7"
3080 mm 10'1"
3870 mm 12'8"
4595mm 15'1"
2
4
0
0
R
3
5
2
4
0
0
R
3
5
TRAVEL PERFORMANCE
010
0 10 20 30 40 50 60
20 30 40 50 60 70 80 90 100 km/h
MPH
TRAVEL SPEED
-10
-15
-20-25-30
-5
-35-40
TOTAL RESISTANCE (GRADE + ROLLING) (%)
0
0 100 200 300 400
20 40 60 80 100 120 140 160 180 200
GROSS WEIGHT
x10
3
lb
x10
3
kg
LOADEDEMPTY
F1
F2
F3
F4
F5 F6 F7
GRADE DISTANCE : CONTINUOUS DESCENT
010
0 10 20 30 40 50 60
20 30 40 50 60 70 80 90 100 km/h
MPH
TRAVEL SPEED
-10
-15
-20-25-30
-5
-35-40
TOTAL RESISTANCE (GRADE + ROLLING) (%)
0
0 100
20 40 60 80 100 120 140 160 180 200
GROSS WEIGHT
x10
3
lb
x10
3
kg
GRADE DISTANCE : 450 m (1,480 ft)
F1
F2
F3
F4
F5 F6 F7
200 300 400
LOADEDEMPTY
Grade distance: Continuous descent Grade distance: 450 m (1480 ft)
To determine travel performance: Read from
gross weight down to the percent of total
resistance. From this weight-resistance point,
read horizontally to the curve with the high-
est obtainable speed range, then down to
maximum speed. Usable rimpull depends
upon traction available and weight on drive
wheels.
To determine brake performance: These
curves are provided to establish the maxi-
mum speed and gearshift position for
safer descents on roads with a given dis-
tance. Read from gross weight down to
the percent of total resistance. From this
weight-resistance point, read horizontally
to the curve with the highest obtainable
speed range, then down to maximum
descent speed the brakes can safely han-
dle without exceeding cooling capacity.
BRAKE PERFORMANCE
F1
F2
F3
F4
F5
F6
F7
706050403020100
0.5
3
5
6
7
8
9
10
20
30
40
50
2
1
4
20.0
15.0
14.0
13.0
12.0
11.0
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
100
60
80
40
30
20
10
5
4
3
2
1
RIMPULL
0 10 15 20 25 30 35 40
TRAVEL SPEED
MPH
km/h
LOADED
EMPTY
GROSS WEIGHT
x10
3
lb
x10
3
kg
x10
3
lb x10
3
kg
5
TOTAL RESISTANCE (GRADE + ROLLING) (%)
40 50 60 70 80 90 100 110 120 130
90 100 110 120 140 160 180 200 240 260280220
HD605-7E0